TS1398 404 server not found?
There is this network I am trying to connect to but when I think its connected a screen pops up and says "404 not found.... the request was not found on this server." What does that mean and how do i get connected to the internet. At one point it had that wifi icon which means your connected so when i went on the internet i still wasnt able to use the internet. For my laptop when i connected to the same network and tried using my internet this home page came up making me use my student id and password and then i was able to use the internet. ( that's cause i am on a college campus using a library network down the street and if you use their wifi you have to agree to the terms and conditions) Why will it let me do it with the laptop but not my ipad? I see everyone else on their ipad connected, but mines cant connect.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
Constantly keep getting error 404, server not found
Very frequently I keep getting the error message 404, server not found. This problem mainly comes up after I have been on the computer for a while, and I leave the web site that I'm viewing on for some time. I then return to the computer some time later, and when I try to refresh the page to update the info on the page (example: a weather site or yahoo stock market info) I keep getting, 404 server not found. When I try the option: try again, it does nothing to solve the constant problem. The only way I can get back to the web site and see updated info is to start firefox in safe mode. And, that does solve the problem. But why does this problem keep constantly occurring. And, why do I have to constantly have to restart firefox in safe mode to get going again. It would seem firefox should recognize this issue and solve it. I'm using what I believe to be the latest version, 15. Can someone shed some light on this issue? I did not have this problem with my older computer and an old version of firefox, version 3.6. But, since getting a new computer and using a new version of firefox, version 15, this problem constantly appears. Can some one help? Thank you.
Which security software (firewall, anti-virus) do you have?
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
404 File not Found when accessing Video Web server
I am trying to access a Video Web server remotely. Everything works fine on a PC and also on Internet Explorer for Mac.
When I login using Safari I get the error message "404 File not Found" "The requested URL was not found on this server"
I have been successful twice through Safari but after that it doesn't seem to work for days.
I have removed all cookies, emptied the Cache, reset safari, deleted all keychain access references to the website.
It seems to be a security issue but I am not sure what else to do.
Any ideas would be greatly appreciatedTry using open DNS:
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS) -
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
HTTP server code 404 reason Not Found explanation Not Found
Hi all
I am facing this error "HTTP server code 404 reason Not Found explanation Not Found" during a asynchronous xml message sent to a buisiness service
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>404</SAP:P1>
<SAP:P2>Not Found</SAP:P2>
<SAP:P3>Not Found</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP server code 404 reason Not Found explanation Not Found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
could you provide an explanation on this error.Hi
Go through this
Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
**********Reward points if usefulll.********** -
Well this morning I woke up to see that my site hosted on Windows Azure was producing 50X errors and in general being incredibly slow (up to 60 seconds response time).
Now after looking through the DetailedErrors folder I see that the error received is:
HTTP Error 404.3 - Not Found The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
I tried creating a new test website and host it and guess what? I receive the exact same error here as well.
What could be causing this?hi,
Do you use windows azure website in Europe ? According to azure dashboard shown,
Some customers may experience intermittent time out errors or slow response when accessing their web sites. Please see this image:
And now, you could try it again.
If I misunderstand, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
firefox 7.0 - Can not upload the file from local machine to server...gives "error 404 : file not found"
you have not understood my point
how does this code will run on servlet when I want to upload a file from client's
machine to server machine
what I am doing is I am giving an option to the user that he/she can browse the file and then select any file and finally it's action is post in the jsp form for which I have sent the code
All the computers are connected in LAN
So how to upload a file from client's machine to server's machine
Plz give me a solution -
SharePoint 2013 Apps shows 404 page not found on web front end servers.
Hi All,
We are implementing SharePoint Apps for our UAT environment with 1 application server and 2 WFEs. In our development server which is single server worked for implementing SharePoint Apps.
All our web applications WFEs are hosted UAT environment and SharePoint Server 2013 is enterprise with this build number 15.0.4420.1017 (RTM). In the Application Server we enabled App management service and Subscription management through
PowerShell.
This DNS configuration is as follows:
contoso.com with IP address for Application server (192.168.10.12) 2 different IP address for WFEs
192.168.10.14/15).
contoso-apps.com for wild card DNS required by SharePoint Apps and pointed to
Application server (192.168.10.12).
We have created self-sign certificate on one the WFE server, create a web application dedicated for SharePoint Apps
without host header and bind the self – sign certificate to the SharePoint Apps web application. DNS is correctly configured on the WFE and we are able to
ping abc.contoso-apps.com.
The App Catalog site is working and we are able to download SharePoint apps. But for the WFEs, when go to SharePoint store
it does shows the content for Store and when download an app and click on Add IT and signed as Office ID we get 404 page not found.
We referred the following sites that relate this 404 error:
http://blogs.technet.com/b/sharepoint_-_inside_the_lines/archive/2013/06/23/404-amp-401-errors-with-the-app-management-service.aspx
http://sharepointchick.com/archive/0001/01/01/setting-up-your-app-domain-for-sharepoint-2013.aspx
http://absolute-sharepoint.com/2013/02/troubleshooting-setting-up-an-environment-for-apps-for-sharepoint-2013.html
http://www.jeremythake.com/2013/12/troubleshooting-sharepoint-2013-hosted-apps-on-premises-404-not-found-error/
https://samlman.wordpress.com/2015/03/01/planning-the-infrastructure-required-for-the-new-app-model-in-sharepoint-2013/
But in my case we have already defined a blank host header for SharePoint Apps that we create previously.
Is it because we not using latest patch as Steve Peschka that March PU fixed this issue?
Any other solution we should look to fix this.
Any suggestions would be greatly appreciated.
SandyYour contoso-apps.com
wildcard address should point to one of the WFE servers, not the Application server. (Actually it should point to the load balancer for the WFEs, but you don't mention a load balancer.) Apps generate a dynamic HTML web site on the WFE server. If
you point to the application server it may not be able to deliver that content if the Microsoft SharePoint Foundation Web Service isn't turned on. (That's what makes a server a WFE)
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
Error Summary
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://www.refworks.com:80/refgrabit/install.xpi
Physical Path E:\RefGrabIt\install.xpi
Logon Method Anonymous
Logon User Anonymous
Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
Most likely causes:
It is possible that a handler mapping is missing. By default, the static file handler processes all content.
The feature you are trying to use may not be installed.
The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
If ASP.NET is not installed.
Things you can try:
In system.webServer/handlers:
Ensure that the expected handler for the current page is mapped.
Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
Pay extra attention to typographical errors in the expected handler line.
Please verify that the feature you are trying to use is installed.
Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
Install ASP.NET.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
View more information »That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.
-
Web-application deployment problem (404 - File not found)
Hello
Does anyone have had the same problems like me on deploying java web-applications on iPlanet WS 6.0?
I started with the HelloWorld.war example that came with the server and went through the manual but no luck so far. Heres what I did:
0. Checked that webapps are enabled in the servler.xml file
1. Created a directory /opt/webapps and /opt/webapps/hello with sufficient permissions
2. Copied the HelloWorld.war example to /opt/webapps
3. Deployed the excample on my test-server using the webinterface.
Heres the content of the web-apps.xml file of my testserver after step 3:
[DTD here]
<vs>
<jsp-servlet enable="true">
<init-param>
<param-name>use-precompiled</param-name>
<param-value>true</param-value>
</init-param>
</jsp-servlet>
<web-app uri="/hello" dir="/opt/webapps/hello" enable="true"/>
</vs>
All files have been extracted to /opt/webapps/hello properly. The server has been restarted.
When I finally point my browser to http://server/hello or hello/index.jsp I get only a 404 - File not found message by the server. The context path seems to be totaly ignored.
Heres the error log of the server
[17/Feb/2003:16:17:38] info (12040): successful server startup
[17/Feb/2003:16:17:38] info (12040): iPlanet-WebServer-Enterprise/6.0SP2 B11/13/2001 00:49
[17/Feb/2003:16:17:39] info (12041): Installing a new configuration
[17/Feb/2003:16:17:39] info (12041): [LS ls1] http://XXX.XXX.XXX.XX, port 1080 ready to accept requests
[17/Feb/2003:16:17:39] info (12041): A new configuration was successfully installed
[17/Feb/2003:16:17:40] info (12041): Using the Solaris VM v1.2.2 from Sun Microsystems Inc.
[17/Feb/2003:16:17:40] info (12041): Java VM classpath: /www/ns-home6sp2/plugins/servlets/examples/legacy/beans.10/SDKBeans10.jar:/opt/jdk1.2.2/lib/tools.jar:/www/ns-home6sp2/bin/https/jar/NSServletLayer.jar:/www/ns-home6sp2/bin/https/jar/NSJavaUtil.jar:/www/ns-home6sp2/bin/https/jar/NSJavaMiscUtil.jar:/www/ns-home6sp2/bin/https/jar/servlet.jar:/www/ns-home6sp2/bin/https/jar/servlet-2.3-filters-api.jar:/www/ns-home6sp2/bin/https/jar/jsp092.jar:/www/ns-home6sp2/bin/https/jar/jaxp.jar:/www/ns-home6sp2/bin/https/jar/crimson.jar:/www/ns-home6sp2/bin/https/jar/xalan.jar:/www/ns-home6sp2/bin/https/jar/jspengine.jar:
[17/Feb/2003:16:17:40] info (12041): Loading IWSSessionManager by default.
[17/Feb/2003:16:17:40] info (12041): IWSSessionManager: Maximum number of sessions is 1000
[17/Feb/2003:16:17:40] info (12041): Adding web application (/hello) at (/opt/webapps/hello)
[17/Feb/2003:16:17:40] info (12041): Loading IWSSessionManager by default.
[17/Feb/2003:16:17:40] info (12041): IWSSessionManager: Maximum number of sessions is 1000
[17/Feb/2003:16:17:40] info (12041): vs(https-duke)servlet 'snoop' class = 'SnoopServlet' loaded in context = '/hello'
[17/Feb/2003:16:17:40] info (12041): snoop: init
[17/Feb/2003:16:17:40] info (12041): Successfully initialized web application environment (web-apps.xml) for virtual server (https-duke)i had similar problem due to the incorrect jdk path...
try http://..../hello/snoop, if this works, it seems that the jsp file cannot be compiled automatically and jdk path needs to be checked... -
404 File Not Found error following 1.0.2.2.1 migration
I am on RDBMS 8.1.7.1.1 on Windows NT 2000 Server.
I attempted to migrate from 9iAS 1.0.2.1 Portal 3.0.8 to 9iAS
1.0.2.2.1 Portal 3.0.8.
There were not any errors in the migration logs.
When I attempt to test the Apache/Jserv the 'Is It Working'
appears. When I attempt to test the mod_plsql I can get to the
login/password screen and into the gateway administration but
when I click the home link I receive the Http: 404 File Not
Found.
The mod_jserv logs:
[01/12/2001 18:58:08:410] (ERROR) ajp12: Servlet Error:
NoClassDefFoundError: oracle.webdb.page.ParallelServlet
In the portal_home/apache/jserv/servlets/zone.promperties file:
servlet.page.code=oracle.webdb.page.ParallelServlet
Here are my upgrade steps:
From Rdbms 8.1.7 to Rdbms 8.1.7.1.1
From 9iAS 1.0.2.1 to 9iAS 1.0.2.2.1
From Portal 3.0.8 to Portal 3.0.9
1) Rdbms 8.1.7
2) Set systemtrig_enable=FALSE in init.ora
3) Install patchset 1711240 for 8.1.7.1.1
4) Execute $oracle_home/rdbms/admin/catalog.sql &
catproc.sql scripts
5) Set systemtrig_enable=TRUE in init.ora
6) Execute the 9iAS 1.0.2.2.1 installation. An upgrade will
take place.
7) Stop the Apache HTTP Service
8) In referencing the 9iAS Migration Guide A90222-01
Section 5.2 Common Configuration Files:
Edit the $portal30_home/apache/jserv/conf/jserv.properties so
that it
Contains one occurrence of the following lines:
# Oracle Portal
wrapper.classpath=E:\portal30\portal30\bibeans\jewt-opt-4_1_2.zip
wrapper.classpath=E:\portal30\portal30\bibeans\share-opt-
1_1_7.zip
wrapper.classpath=E:\portal30\portal30\bibeans\utility.jar
wrapper.classpath=E:\portal30\portal30\bibeans\utilitygui.jar
wrapper.classpath=E:\portal30\portal30\bibeans\utilitypersist.jar
wrapper.classpath=E:\portal30\portal30\bibeans\utilityxml.jar
wrapper.classpath=E:\portal30\portal30\bibeans\swingall.jar
wrapper.classpath=E:\portal30\portal30\bibeans\graph.jar
wrapper.classpath=E:\portal30\portal30\bibeans\graphgui.jar
wrapper.classpath=E:\portal30\portal30\bibeans\LW_PfjBean.jar
wrapper.classpath=E:\portal30\portal30\bibeans\bivisbeans.jar
wrapper.classpath=E:\portal30\lib\http_client.jar
wrapper.classpath=E:\portal30\jlib\javax-ssl-1_2.jar
wrapper.classpath=E:\portal30\jlib\jssl-1_2.jar
wrapper.env=WV_GATEWAY_CFG=E:\portal30
\Apache\modplsql\cfg\wdbsvr.app
9) In referencing the 9iAS Migration Guide A90222-01
Section 5.2 Common Configuration Files:
Edit the $portal30_home/apache/jserv/conf/jserv.properties so
that it
Contains one occurrence of the following lines:
# Oracle BC4J
wrapper.classpath=E:\portal30\Apache\BC4J\lib\ordim817.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\ordvir817.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\ordhttp.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jndi.jar
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jbomt.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\javax_ejb.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jdev-rt.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jbohtml.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jboremote.zip
wrapper.classpath=E:\portal30
\Apache\BC4J\lib\connectionmanager.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jbodomorcl.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jboimdomains.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jboorasql.zip
wrapper.classpath=E:\portal30
\Apache\Apache\htdocs\onlineorders_html
#wrapper.classpath=E:\portal30
\Apache\Apache\htdocs\OnlineOrders_html\OnlineOrders.jar
9) In referencing the 9iAS Migration Guide A90222-01
Section 5.2 Common Configuration Files:
Edit the $portal30_home/apache/jservlets/zone.properties and
Remove the following line:
repositories=E:\portal30\Apache\Jserv\servlets\Parallel.jar
10) In referencing the 9iAS Migration Guide A90222-01
Section 5.2 Common Configuration Files:
Edit the $portal30_home/apache/jservlets/zone.properties and
Remove duplicates of the following line:
servlet.page.code=oracle.webdb.page.ParallelServlet
11) In referencing the 9iAS 1.0.2.2.1 Release Notes A92199-01
Section 1.5.4.1.4
Edit the $portal30_home/apache/jservlets/zone.properties and
Remove duplicates of the following lines:
repositories=E:\portal30\Apache\Jserv\servlets\Parallel.jar
(this line is actually removed completed per step 9)
repositories=E:\portal30\Apache\Jserv\servlets\ChartServlet.jar
repositories=E:\portal30\Apache\Jserv\servlets\AppLoader.jar
servlet.chart.code=oracle.webdb.chart.ChartServlet
servlet.apploader.code=oracle.webdb.apploader.AppLoaderServlet
servlet.ojsp.code=oracle.jsp.JspServlet
servlet.ojsp.initArgs=alias_translation=false
12) In referencing the 9iAS 1.0.2.2.1 Release Notes A92199-01
Section 1.5.1.36
Edit the $portal30_home/apache/jserv/conf/jserv.config
Insert:
# PTG 1.1.1 Begin
ApJservGroupMount /ptg balance://group1/root
# PTG 1.1.1 End
13) In referencing the 9iAS 1.0.2.2.1 Release Notes A92199-01
Section 1.5.2.9
Edit the $portal30_home/apache/apache/conf/httpd.config
Add the following directive:
Alias /soapdocs/ “c:/portal30/soap/”
14) Start the Apache HTTP serviceIn the web.xml you mapped the HelloServlet to the
/sampleapp url so you should call the servlet with the
url:
http://localhost:8080/<webapp>/sampleapp
The directory structure of sampleapp is as follows,
e:\sampleapp\WEB-INF\classes\
WEB-INF\lib
WEB-INF\sourcefiles
WEB-INF\web.xml
I dont have a webapp folder in my directory at all.
<servlet-mapping>
<servlet-name>HelloServlet</servlet-name>
<url-pattern>/sampleapp</url-pattern>
</servlet-mapping>As the below lines would suggest -
WL6.1 : Get '404 : File not found' for all WARs
I had some web applications deployed which were running perfectly. Now suddenly
, I get '404 - File not found' for any URL - including the server root, i.e. http://localhost/
I was able to access admin console using http://localhost/console. I checked the
config of each application & couldn't find anything wrong.
Finally I had to re-deploy the WARs to get some applications running.
However, I am still unable to get the Default Web App running - the one handling
server root path.. (I've checked the server config & it shows DefaultWebApp as
the default application).
Any pointers on what could be wrong / correction needed ?
TIA,
SubodhCreate a subdirectory called 'classes' and copy your servlet class file
to the 'classes' dir.
mydomain/applications/
DefaultWebApp/
WEB-INF/classes.
Modify the web.xml file located in the mydomain/applications/
DefaultWebApp/
WEB-INF/ directory
<web-app>
<servlet>
<servlet-name>
myServlet
</servlet-name>
<servlet-class>
package.name.myServlet
</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>
myServlet
</servlet-name>
<url-pattern>
servlet-url-pattern
</url-pattern>
</servlet-mapping>
</web-app>
Start the default WebLogic Server.
Call your servlet from a Web browser with the following URL:
http://localhost:port/servlet-url-pattern
servlet-url-pattern is the value of the <url-pattern> element that you
defined in the web.xml file.
prakash wrote:
> Hi everybody ,I have this web app on weblogic 7 .The application
> works file with Tomcat 4.0 but on WebLogic server 7,I am getting
> 404 not found for all the servlets ,although weblogic is serving
> the html files without any problems
-
On : Apache 2.0 , Weblogic 7.0, Win 2000
I installed the Apache plug-in for as described in WL docs, but when I try to
access a URL /weblogic/ ( supposed to be configured automatically ) on apache,
I get '404 : file not found' error.
As per the docs, I did following config in Apache:
1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory to the
APACHE_HOME\modules directory
2. Added to httpd.conf :
LoadModule weblogic_module modules/mod_wl_20.so
3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
-t '
4. Restarted WL & Apache.
Now, the weblogic documentation says,
"Test the Apache plug-in by opening a browser and setting the URL to the Apache
Server + "/weblogic/", which should bring up the default WebLogic Server HTML
page, welcome file, or default servlet, as defined for the default Web Application
on WebLogic Server. For example:
http://myApacheserver.com/weblogic/".
For my server, 'http://localhost/weblogic/' - I get a "404 : file not found" error.
What other configuration is needed ? Do I have to specify '/weblogic/' name anywhere
else in Apache configuration file ?
Any pointers will be appreciated.
Thanks,
SForgot to mention , I've also added following configuration in httpd.conf :
LoadModule weblogic_module modules\mod_wl_20.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7501
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
"S" <[email protected]> wrote:
>
On : Apache 2.0 , Weblogic 7.0, Win 2000
I installed the Apache plug-in for as described in WL docs, but when
I try to
access a URL /weblogic/ ( supposed to be configured automatically ) on
apache,
I get '404 : file not found' error.
As per the docs, I did following config in Apache:
1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory
to the
APACHE_HOME\modules directory
2. Added to httpd.conf :
LoadModule weblogic_module modules/mod_wl_20.so
3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
-t '
4. Restarted WL & Apache.
Now, the weblogic documentation says,
"Test the Apache plug-in by opening a browser and setting the URL to
the Apache
Server + "/weblogic/", which should bring up the default WebLogic Server
HTML
page, welcome file, or default servlet, as defined for the default Web
Application
on WebLogic Server. For example:
http://myApacheserver.com/weblogic/".
For my server, 'http://localhost/weblogic/' - I get a "404 : file not
found" error.
What other configuration is needed ? Do I have to specify '/weblogic/'
name anywhere
else in Apache configuration file ?
Any pointers will be appreciated.
Thanks,
S -
Error when open the Import window (404: File Not Found)
HI everyone,
I have upgraded OIM 9.1.0.1 to 9.1.0.2
The application runs OK, but when I click in "Deployment Managerment -> Import", the App gets an error:
"404: File Not Found
File Not Found: /xlWebApp/dm/dmImportViewer.jsp"
And the log gets this error:
[12/14/09 19:21:31:371 BRST] 00000037 SystemOut O 19:21:31ERROR [WebContainer : 2] - ExceptionHandler.createTimeoutDialog: context path = /xlWebApp
java.lang.NullPointerException
at com.nexaweb.server.exceptions.ExceptionHandler.createDialog(ExceptionHandler.java:423)
at com.nexaweb.server.exceptions.ExceptionHandler.createErrorDialogs(ExceptionHandler.java:403)
at com.nexaweb.server.NexawebServer.doService(NexawebServer.java:378)
at com.nexaweb.server.NexawebServer.doGet(NexawebServer.java:335)
at com.nexaweb.server.admin.ServerAdmin.callNexawebServer(ServerAdmin.java:378)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.nexaweb.loader.xMethodInvoker.runInThread(xMethodInvoker.java:69)
at com.nexaweb.server.api.admin.ServerAdminProxy.callNexawebServer(ServerAdminProxy.java:551)
at com.nexaweb.redirect.RedirectServlet.doGet(RedirectServlet.java:18)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:907)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:696)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:641)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:475)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:92)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1425)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:92)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:193)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:725)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:847)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1498)
[12/14/09 19:21:31:371 BRST] 00000037 SystemOut O ERROR,14 Dec 2009 19:21:31,357,[com.nexaweb.server.exceptions.ExceptionHandler],ExceptionHandler.createTimeoutDialog: context path = /xlWebApp
java.lang.NullPointerException
at com.nexaweb.server.exceptions.ExceptionHandler.createDialog(ExceptionHandler.java:423)
at com.nexaweb.server.exceptions.ExceptionHandler.createErrorDialogs(ExceptionHandler.java:403)
at com.nexaweb.server.NexawebServer.doService(NexawebServer.java:378)
at com.nexaweb.server.NexawebServer.doGet(NexawebServer.java:335)
at com.nexaweb.server.admin.ServerAdmin.callNexawebServer(ServerAdmin.java:378)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.nexaweb.loader.xMethodInvoker.runInThread(xMethodInvoker.java:69)
at com.nexaweb.server.api.admin.ServerAdminProxy.callNexawebServer(ServerAdminProxy.java:551)
at com.nexaweb.redirect.RedirectServlet.doGet(RedirectServlet.java:18)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:907)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:696)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:641)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:475)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:92)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1425)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:92)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:193)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:725)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:847)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1498)
[12/14/09 19:21:31:385 BRST] 00000037 SystemOut O 19:21:31ERROR [WebContainer : 2] - ExceptionHandler.createTimeoutDialog: context path = /xlWebApp
java.lang.NullPointerException
at com.nexaweb.server.exceptions.ExceptionHandler.createDialog(ExceptionHandler.java:423)
at com.nexaweb.server.exceptions.ExceptionHandler.createErrorDialogs(ExceptionHandler.java:405)
at com.nexaweb.server.NexawebServer.doService(NexawebServer.java:378)
at com.nexaweb.server.NexawebServer.doGet(NexawebServer.java:335)
at com.nexaweb.server.admin.ServerAdmin.callNexawebServer(ServerAdmin.java:378)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.nexaweb.loader.xMethodInvoker.runInThread(xMethodInvoker.java:69)
at com.nexaweb.server.api.admin.ServerAdminProxy.callNexawebServer(ServerAdminProxy.java:551)
at com.nexaweb.redirect.RedirectServlet.doGet(RedirectServlet.java:18)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:907)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:696)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:641)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:475)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:92)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1425)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:92)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:193)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:725)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:847)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1498)
[12/14/09 19:21:31:385 BRST] 00000037 SystemOut O ERROR,14 Dec 2009 19:21:31,371,[com.nexaweb.server.exceptions.ExceptionHandler],ExceptionHandler.createTimeoutDialog: context path = /xlWebApp
java.lang.NullPointerException
at com.nexaweb.server.exceptions.ExceptionHandler.createDialog(ExceptionHandler.java:423)
at com.nexaweb.server.exceptions.ExceptionHandler.createErrorDialogs(ExceptionHandler.java:405)
at com.nexaweb.server.NexawebServer.doService(NexawebServer.java:378)
at com.nexaweb.server.NexawebServer.doGet(NexawebServer.java:335)
at com.nexaweb.server.admin.ServerAdmin.callNexawebServer(ServerAdmin.java:378)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.nexaweb.loader.xMethodInvoker.runInThread(xMethodInvoker.java:69)
at com.nexaweb.server.api.admin.ServerAdminProxy.callNexawebServer(ServerAdminProxy.java:551)
at com.nexaweb.redirect.RedirectServlet.doGet(RedirectServlet.java:18)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:907)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:696)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:641)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:475)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:92)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1425)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:92)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:193)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:725)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:847)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1498)
[12/14/09 19:21:31:386 BRST] 00000037 SystemOut O 19:21:31 WARN [WebContainer : 2] - SessionManager._createAppContextByAppName: Servlet Context is NULL for app:/xlWebApp/dm/dmImportViewer.jsp
[12/14/09 19:21:31:386 BRST] 00000037 SystemOut O WARN,14 Dec 2009 19:21:31,386,[com.nexaweb.server.session.SessionManager],SessionManager._createAppContextByAppName: Servlet Context is NULL for app:/xlWebApp/dm/dmImportViewer.jsp
[12/14/09 19:21:31:386 BRST] 00000037 SystemOut O 19:21:31 WARN [WebContainer : 2] - SessionManager.createAppContextUsingAppName: FAILED to create application context for appname:/xlWebApp/dm/dmImportViewer.jsp, mapped uri:/xlWebApp/dm/dmImportViewer.jsp
[12/14/09 19:21:31:386 BRST] 00000037 SystemOut O WARN,14 Dec 2009 19:21:31,386,[com.nexaweb.server.session.SessionManager],SessionManager.createAppContextUsingAppName: FAILED to create application context for appname:/xlWebApp/dm/dmImportViewer.jsp, mapped uri:/xlWebApp/dm/dmImportViewer.jsp
[12/14/09 19:21:31:400 BRST] 00000037 SystemOut O 19:21:31ERROR [WebContainer : 2] - ExceptionHandler.handleException
com.nexaweb.server.exceptions.ResourceNotFoundException: Application context is NULL for app:/xlWebApp/dm/dmImportViewer.jsp
at com.nexaweb.server.services.protocol.NexawebProtocolHandler.handleLaunchCommand(NexawebProtocolHandler.java:387)
at com.nexaweb.server.NexawebServer.getSession(NexawebServer.java:565)
at com.nexaweb.server.NexawebServer.doService(NexawebServer.java:408)
at com.nexaweb.server.NexawebServer.doGet(NexawebServer.java:335)
at com.nexaweb.server.admin.ServerAdmin.callNexawebServer(ServerAdmin.java:378)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.nexaweb.loader.xMethodInvoker.runInThread(xMethodInvoker.java:69)
at com.nexaweb.server.api.admin.ServerAdminProxy.callNexawebServer(ServerAdminProxy.java:551)
at com.nexaweb.redirect.RedirectServlet.doGet(RedirectServlet.java:18)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:907)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:696)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:641)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:475)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:92)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1425)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:92)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:193)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:725)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:847)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1498)
[12/14/09 19:21:31:400 BRST] 00000037 SystemOut O ERROR,14 Dec 2009 19:21:31,386,[com.nexaweb.server.exceptions.ExceptionHandler],ExceptionHandler.handleException
com.nexaweb.server.exceptions.ResourceNotFoundException: Application context is NULL for app:/xlWebApp/dm/dmImportViewer.jsp
at com.nexaweb.server.services.protocol.NexawebProtocolHandler.handleLaunchCommand(NexawebProtocolHandler.java:387)
How can I resolve it?
Thanks,
ArielHave you checked whether Nexaweb is deployed in your App Server or not ?
If not you'll have redeploy it .
Which JRE version are you using ?
http://download.oracle.com/docs/cd/E14899_01/doc.9102/e14764/toc.htm
5.1.14 Deployment Manager Requires JRE 1.6.0_07 (Bug 5565793)
An export operation using the Deployment Manager may encounter problems when Microsoft Internet Explorer is configured to use Microsoft Virtual Machine. To reset the default Virtual Machine:
Edited by: Rajiv Dewan -
Ent 9 - Can't run mgmt console - admin.cwr gives Error 404: page not found
Post Author: Alan Weiner
CA Forum: Deployment
We just did a fresh install of Crystal Enterprise 9. When we try to run the Management console, we get an "Error 404: page not found"
http://wdcwfc80/crystal/enterprise9/admin/en/admin.cwr
Error 404: The page cannot be foundPost Author: Alan Weiner
CA Forum: Deployment
From the server (although, it uses a browser to connect)
colin mackenzie:
Hi Alan Weiner.
Do you get this message when you run this from the server? or just the workstation / client browser?
Maybe you are looking for
-
SSRS - How to display all the results from a query and then be able to filter the data
Let's say I have a simple query that will return products name, ID, price SELECT pname, pID, price FROM products When I display the results in SSRS the user will (without entering any parameters) see something like: Product Name | ID | Price xyz
-
HT1386 itunes recognises my iPod but it will not sync automatically?
When I connect my Ipod classic to itunes , it appears in devices. It used to automatically sync and download songs to the ipod, this does not happen now. What has gone wrong, I have installed the latest itunes update.??
-
I've got a problem with my linksys ea2700. one time my network components get an ip-address like 192.168.x.x, the other time they get an ipaddres 10.184.x..x, I want that all my components will get the 10.184.x.x address, how can I solve this problem
-
Exchange 2010 SP3 - How many Calendar Items/Folders can you create under "all public folder"
Hi, Is there a limitation on how many calendar items/folders you can create under "all public folder" in Exchange 2010 SP3? Thank you
-
Thread pool tuning on J2ee NW04s...
Hi, I have troubles in defining the number of threads in the pool of the server and dispatcher. First of all, I know that there are several thread pools depending on the node you are: - Server node: System and Application thread pool. - Dispatche