TS1398 can not connect to wi-fi after upgrading to os6

Upgraded to OS6 on both Iphone 4s and Ipad2 and immediately can not connect to wi-fi. did all recommended fixes, ie. settings reset, power off and on etc... still no luck. My ipad is wi-fi only and doesn't do me any good if i can't connect.

If your wifi is greyed out do the following:
1) Put your phone on a plastic bag and then in the fridge (not the freezer!).
Wait around 20 minutes to take it out.
2) The moment you take it out reset your network settings.
When the phone turns on, your wifi wont be greyed out.
But...
The problem you might have is that it wont pick up any networks at all. Which is my case.

Similar Messages

ITunes can not connect to remote speakers after upgrades

I recently downloaded the new version of iTunes and I am no longer able to connect to my remote speakers. I get a random error message when trying to connect. I've rebooted the airport station and modem. Didn't solve the problem.
Can anyone help? I'm stumped...

I have a MacBook, airport express and appletv. All three were working with airtunes on itunes 7 without issue. Since itunes 8, airport express works great, but the itunes keeps reporting that my appletv speakers are no longer available.
Problem will occur on sleep/wakeup and whenever itunes decides it is angry, even though my appletv is listed on the bar and is syncing. Sometimes it will play for about 10 seconds and then the music stops, but itunes indicates it is still playing. Pause/play will sometimes resolve the issue, but other times will report the appletv speakers have disappeared, but itunes is still listing the apple tv. Rebooting appletv makes no difference.
Workaround has been to restart itunes. For the music stopping after 10 seconds, if restarting itunes results in the same problem, reboot computer. My firewall is disabled, so my opinion .
Also - I love the remote app on my touch, but when play fails due to a speaker error there is no feedback. Instead I get no music and after a delay the icon changes from pause to play again. Of course itunes was complaining about unavailable speakers. Someone should add some intelligence to report such errors to the remote.

OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.

hi ALL
OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.
Exchange environment contains 2 Exchange Mailboxesserver ,( one Failed , virtual Machine)
2 cas Servers
first databases could not be mounted but after we run the below command , users can use OWA but outlook could not connect
Start-DatabaseAvailabilityGroup -Identity DAG -MailboxServer MBX1
please support
thanks

Hi,
According to your description, I understand that Outlook client cannot connect to Exchange server 2013 while one member of DAG failed.
If I have misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account store in MBX1 experience this issue, users in MBX2 works fine.
Please run following command to double check the database status:
Get-MailboxDatabase –Status | select Name,Mounted,MountedOnServer
If it works in OWA, the issue may be related to Outlook side. Please run “Test E-mail AutoConfiguration” and “Outlook Connection Status” to get more details, expecial the setting of proxy server, it’s more helpful
for further troubleshooting.
Additional, please try to recreate a profile for testing. Besides, please move active DB back to MBX1.
Best Regards,
Allen Wang

Can't connect ipad to wifi after upgrading to ios6

can't connect ipad to wifi after upgrading to ios6

Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi. (This is probably not practical in your situation.)
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

I can not use ipad smart cover after upgrade ios 7.

I can not use ipad smart cover after upgrade ios 7. It makes reboot again again...if i cover up ipad with smart cover. i never had this problem before. please fix this bug!!!!

Change your iPod DNS to 8.8.8.8
That should work. Cheers

Can not connect to iTunes store after resetting password

After resetting password on iPhone 5,iPad can not connect to iTunes. Any one know how to correct?

I am having the same Issues.

TS1398 Can not connect to Wi Fi on my iPad Wi Fi is on and will connect to other devices IPad is searching for network and can not find a network I have reset device and nothing is working help

Can not connect iPad 2 to wi fi IConnection works on other devices. This device is searching and can not find Wi Fi to connect too

It does connect at other Hot Spot locations. At home and here at my office, I have At&t DSL & Wireless,Motorola 3347 Router. Computers hook right up to wireless with no problem, I just can't get ipad to connect. Password is rejected. Thanks for you quick response, I am not very computer litterate and this is driving me crazy. Thanks again
Mike

The powerpoint 2003 file with a swf embeded, can not see and manipulate it after upgrade to Adobe flash 14 !!

I have a powerpoint 2003 file with a swf embeded, which is created by SAP Xcelsius 2008. I can not see and manipulate it after I upgrade to Adobe flash 14 !!
What happen ?
How to solve this problem ?

Please don't post the same question multiple times!

Can not connect to wi if after resetting networks

iPad2 no longer connects to Internet with safari and apps loaded (Facebook) will not connect either. Gmail account works though
Reset networks but that did not solve e problem

The result I found was that when I connect my iPad to my Mac and iTunes automatically opens, iTunes updates / sync my iPad. When I disconnect the iPad after the sync, my apps no longer work. howerver, if I delete one app and then go to the apple store and reload the same app, All of my aps work again. I hav
E not found out why this happens, but I've done this multiple times with the same result.

Can not connect to itunes server after installation

I just got a laptop with Windows 8 and I am trying to install I-Tunes 11 to the new laptop. It installs ok, but after you open I-tunes it does nothing... Will not connect to Itunes Store, search for music, check for updates. I keep getting a cannot connect to itunes server check internet connection. Internet connection is fine because I am posting the question from the latop.

I am having the same Issues.

Can not connect to itunes store after update

i did an update on my itunes now when i go to the store it says "itunes could not connect to the ituns store. make sure your network connection is active and try again". it has done this before when i did an update the last time

I have the same problem and I ran the diagnostic, and this is what I got...
Microsoft Windows Vista x64 x64 Ultimate Edition Service Pack 1 (Build 6001)
MSI MS-7380
iTunes 9.0.0.70
QuickTime 7.6.4
FairPlay 1.5.18
Apple Application Support 1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 9E3F83C9EF7C7334
Current user is not an administrator.
The current local date and time is 2009-09-15 23:48:45.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8800 GTS
** External Plug-ins Information **
No external plug-ins installed.
The LowerFilters values in the Windows registry are invalid.
Go here for more information:
http://support.apple.com/kb/TS2372
iPodService 9.0.0.70 is currently running.
iTunesHelper 9.0.0.70 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {58084DD3-570B-4FE4-869B-264F7CBC49DF}
Description: NVIDIA nForce Networking Controller
IP Address: 155.42.195.14
Subnet Mask: 255.255.255.0
Default Gateway: 155.42.195.1
DHCP Enabled: Yes
DHCP Server: 155.42.34.9
Lease Obtained: Tue Sep 15 23:10:02 2009
Lease Expires: Sat Sep 19 23:10:02 2009
DNS Servers: 155.42.34.9
155.42.34.9
155.42.33.10
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2009-09-13 09:18:46.

Can't connect to 3G network after upgrading to ios5.1 on iPad2.

Has anybody exprienced this after upgrading to ios5.1 on the iPad2? I can't connect to 3G network at all. It keeps giving a message of "You are not subscribed to a data network:. But I still have data left this month on my cellular contract.

Hi Miky. After upgrading to ios 5.1 I had the same problem.
I reset the APN on network settings and rewriting the same. iPad now working on 3G.
My operator is 3 ITA
iPad 1 64 GB Wi-Fi + 3G

Can't connect to SMB share after upgrade

Just upgraded to 10.9 Mavericks and can no longer connect to our SMB file share on the network. Several of us have tried connecting to it on this machine and all we get is
There was a problem connecting to the server "xxxxxxx.domain.com".
You do not have permission to access this server.
Anyone else having this problem?

I have been searching high and low since yesterday afternoon for an answer to this. My problem is not connecting to an SMB share (well, it was, as the old Cmd+K to connect to the SMB share would close quickly) but instead of the old Mac way of using Cmd+K and the IP address, I simply clicked on the available NAS SMB share under Shared and it is a massively fast connection. The old SMB connection would take minutes to open the next folder. So, connecting as you would under Windows helped fix that problem, BUT...
1. The NAS SMB share times out regularly and you have to eject & reconnect. Annoying.
2. Worse than this is I can not open any documents on the share, only navigate it. I have to copy paste the documents to my local ssd, manipulate, copy back. Any new file I copy on, or edit and copy on, the NAS SMB share I can navigate to and open. But if I try to click a pre-Mavericks existing file, I get "Can not open 'excel/word/acrobat.app' with the -36" error. Total BS.
3. Even more weird, if I click spacebar on ANY file on the SMB Share it will pop up in preview. Double click to open and error message.
4. If I copy a document attached to an email (Outlook 2011) to the server it is corrupt. If I copy the file to local ssd, then to the NAS SMB, the same file works perfectly fine.
This is completely ridiculous and needs a fix immediately. I'm going to try using Reinfire's link right now and see if that helps.
My NAS is a Netgear ReadyNAS 516 (linux/unix OS) I use in my office. Computer is MBPr March 2013.

Can't connect to Samba shares after upgrading

Hi,
I recently upgraded to Samba 3.6.0-8 (among other things, including a new kernel 3.0-ARCH), and all my shares have become unavailable from Windows 7. I can't connect to any, nor can I see the shares list. My Arch box has essentially become invisible as far as CIFS shares go. I can still ping it normally, and access it through SSH, so it doesn't seem to be a major network issue, this is specifically with Samba.
I have since tried changing my workgroup in Samba, downgrading to 3.6.0-{1,4}, disabling firewalls, changing Win7's security settings, and restarting several times, to no avail. Nothing has changed with my Windows box, I only performed a major upgrade to Arch (it is currently up-to-date).
I don't see any relevant errors in the Samba logs, and I can browse the shares just fine locally in Arch, I just can't see them from Windows.
Anyone have a clue?
Thanks,
IM

Is your arch server configured to allow samba traffic? With the recent removal of hosts.allow and hosts.deny, I wonder if this could be the issue? Do you have ufw or iptables? I know you said you disabled the firewall, but it wasn't clear if that was on the client or server.
Scott
edit: here's the ufw rule I use (/etc/ufw/applications.d/samba):
[Samba]
title=Windows file and printer server for Unix
description=Tools to access a server's filespace and printers via SMB
ports=137,138/udp|139,445/tcp
Last edited by firecat53 (2011-09-21 18:18:59)

I can not open my iphone 4 after upgrading to 6.1.3 :( can someone help me please

My iphone went dead after upgrading to 6.1.3 it is completeley useless i tried hard reset but it didnt work , i tried via itunes to restore or dfu mode but still it isnt workin . can someone help me pleasse

What messages or error codes do you get ?

TS1398 can not connect to wi-fi after upgrading to os6

Similar Messages

Maybe you are looking for