TS1398 Can't access school wifi

I Upgraded to the new iOS 6. Now I can't log on to my school wifi. It says the page can't be found. I need access to do my homework.

A little effort on your part would have revealed that 6.0.2 is only for the iPhone5 and iPad mini as well as this article on how to address Wi-Fi being grayed out.

Similar Messages

  • TS1398 i can't access to wifi ..... it's so weak

    i can't access to wifi ..... it's so weak....
    it's conncet but when i'm so close to router
    what's the problem ..... is it from software or hardware ???
    and how i can fix it ???

    - Does it happen with all networks?
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore the iPod from backup
    - Restore the iPod to factory settings/new iPod
    If still problem with all networks you likely have a hardware problem. Maybe the antenna got disconnected. An appointment at the Genius Bar of an Apple store is in order.

  • Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up

    Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.

    This is a user to user help forum only. You are not addressing Apple here.
    My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

  • HT1386 I updated my daughters iPod Touch and now the music states is it now stored on iCloud and can be accessed on WiFi or cellular.  There is no music stored on the iPod and she listens to it outside of the home without WiFi.  I will not let me sync.

    I updated my daughter iPod touch.   Now the music states that it is on iCloud and can be accessed using WiFi or cellular.   I need to move the music back on the iPod so that she can listen to it without WiFi.   I tried to Restore backup but still does not work.   I tried to sync, still does not work.

    Is the music in your iTunes library?
    Why can't you sync?
    You said "Now the music states that it is on iCloud and can be accessed using WiFi or cellular."
    where does it state that?
    Just redownload them from iCloud to the computer and the iPod by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT4623 after I updated my iPhone 4 to iOS 6.1 I can't access my WiFi (The greyed out Wi-Fi button)

    after I updated my iPhone 4 to iOS 6.1 I can't access my WiFi (The greyed out Wi-Fi button)

    Most likely the iphone was hacked to unlock it from the original carrier
    updating the iOS will relock a hacked iPhone to that Carrier

  • TS1398 Can't access wifi from ios 6.0.1 on my iPhone 4S.

    I just updated my phone to the ios 6.0.1 but i cant access the wifi. When i go to my wofi setting the box is grayed out. I know that there is the ios 6.0.2 for the iphone 5 that fixes this bug. Can the iphone 4s download the 6.0.2 update? I haven't gotten the option yet.

    A little effort on your part would have revealed that 6.0.2 is only for the iPhone5 and iPad mini as well as this article on how to address Wi-Fi being grayed out.

  • Can't Access Public WiFi after 10.8.5 update

    I can connect to wifi on my MacBook Pro from home, but I can't connect to the Internet through public wifi at Starbucks or Panera. I can connect to their login screens, but not to the Internet. Any ideas?

    I am having the exact same issue, it would seem, with my 2012 MacBook Air.
    It started following updating to 10.8.5.  I first noticed it when I tried to get on WiFi at a FedEx Office (AT&T WiFi).  The login in screen popped up but never loaded.
    I eventually gave up and tethered to my phone.
    Later on, I tried to connect at a Starbucks (also AT&T WiFi) and no login screen was launched.  Sometimes I could get an IP address, other times it was a self-assigned IP. 
    I could also not connect at the adjacent Einstein Bros. Bagels.  Again, no login/authentication screen would launch on the MacBook Air.
    This workaround, while a pain, has worked 100% of the time to address this issue.
    Authenticate to the commerical WiFi network from my phone
    Turn off my phone's WiFi
    Spoof my phone's MAC address onto my MacBook Air
    Successfully access the WiFi network
    Unfortunately, I presently have no way of rolling back to 10.8.4, so it looks like I'll be doing this workaround until I either come up with a permanent fix or until 10.8.6 comes out and hopefully addresses this issue.
    I have no problem connecting to either open WiFi networks or networks with WEP/WPA/WPA2 security.  Only networks that launch login/authentication screens present this issue.

  • Can not access web wifi simble on but can not connect the the internet

    wifi on but can not access internet

    I COULD SOLVE THE PROBLEM!!!  :    CHANGE YOUR ISP
    I it is obvious that we are talking about different issues, but all arise from the same origin. I am a surgeon and fortunately one of my patients is executive manager of one of biggest ISP companies from which I have bought my Internet service for home and my clinic.
    One day I told him the problem and he promised to check it for me. A few days later he called me and discussed the exact problem (unfortunately as I am not I.T professional, I couldn’t understand it well, I can just remember he was talking about MULTIPLEXING incompatibility between Mac security settings and that specific ISP multiplexing settings, He also said they had similar problems with some Linux users. I can remember he relate the problem to cheap ISP hardware, which leads to security issues which  are ignored by Windows Systems but leading to connection blockade in Mac Browsers. That’s why if you PING yahoo.com, you will see everything is OK but your browsers are not working)
    In fact this is a hardware issue which is related to ISP (Internet Service Provider) security and not your Mac.
    The day after, I took my MacBook to some ISP offices and asked them to let me connect to their line just for a test. “ Surprisingly I found out without changing my MacBook’s settings it works well with some ISPs and not with others!! “
    I have two ADSL lines: one at home and one in my clinic. First I changed my home ISP and everything is well at home from the day I did the change. But before changing my clinic’s ISP it worked at home and not at the clinic. Later I changed my clinic’s ISP and afterward never I had any problem.  This proves ( as that manager said also) this problem is related to ISP and not Mac itself and that’s why Apple could not have resolved the problem yet: different ISPs have different issues.
    Here I can make some suggestions:
    1- First, take your MacBook into different ISP offices and find the one which works well (before making the contract and paying money to the ISP, restart the Mac or send it into sleep mode repeatedly to make sure the connection never drops with restart or sleeps)
    2- Change your modem:  Modems as TP-LINK, D-LINK, are not well compatible with Mac.  Apple modems or Linksys are perhaps the best choices (this is not main cause of internet drop, but can affect the performance)
    3- Make sure your neighbor’s Wi-Fi is not exactly on the same channel as you are using (I use iStumbler for finding my neighbor’s channels)
    4- Find best DNS: ask your ISP to provide you most compatible DNS’s for you. Perhaps most known DNSs are 8.8.8.8 and 4.2.2.4.It helps you to browse the Internet more efficiently
    Some people in other forums suggested that upgrading to Mountain Lion has helped them. But It didn't work for my clinic's line. Just changing the ISP at clinic resolved my problem
    BETWEEN THESE 4 SUGGESTIONS, THE FIRST ONE IS THE MAIN SOLUTION AND NO 2-4 CAN HELP THE PERFORMANCE.
    Move on!!!   Change your ISP and let me know if it works!!!!

  • TS1398 Can't turn on wifi on settings iphone 4 please help

    I can not turn on wifi in settings

    Did you already have a look at this article?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim

  • TS1398 can't turn my wifi on my iphone 5

    My Iphone 5 can't find any wifi at all it stop working this week and i have updated my phone need help !

    Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

  • What to do if you can't access a wifi network and showing you message that your airport has a self-assigned IP and cannot be connected to the internet?

    Hi,
    i am currently using 10.6.8 snow leopard
    i usually access internet through my broadband modem and wifi at home.
    i've been using our home wifi network for almost 1 week now (since it's new) and almost everyone at home use it as well.
    and im using my broadband everytime i go out.
    this last week, i went to a vacation and i use the wifi connection of the hotel where i stay in.
    my connection works fine and so i don't use my broadband anymore.
    then i got home..
    when i got home..  i tried to connect to our home wifi network again .
    like what im doing before, im clicking the airport icon on the top of my desktop,
    and since my airport is always on, the next step that im doing is to click the preferred network that i want to join and put the password on it.
    this is perfectly working in my macbook before i left.
    but now , it's not working to my laptop anymore! i can't connect to it!
    after putting the password and hitting the enter, the airport icon at the top will run, however after seconds it showing gray color with exclamation point on it!
    the alert is showing : No internet connection
    but the network i joined is still checked and showing full signal !
    i tried checking my Network under system preferrence and the airport tab in the left corner is showing me a message that
    my airport has the self-assigned IP address 169.***.****.** and will not be able to connect to internet!
    i don't know what happen and i dont understand why is this happening since everyone at home can still use and access our home wifi !!
    it's the same network that i'm trying to connect to anyway!
    i tried using my broadband instead to connect online and it works fine!
    but everytime i try to connect using wifi at home , again i cant connect!
    anyone can tell me what's going on?
    i haven't try joining other network anyway! but i'm planning to do so..
    can some one help me please??
    showing me a message that
    my airport has the self-assigned IP address 169.***.****.** and will not be able to connect to internet!

    and now, when i tried to check again my network preference below the airport tab is showing a message that
    "my airport does not have an IP address and cannot connect to the internet!"
    then after seconds it will goes back to the first message that
    "airport has the self assigned IP address etc....."
    i don't know whats going on now!
    airport tab is not showing green color anyway! i'ts always in yellow!
    i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

  • I can't access my wifi on my iphone 4s

    I've got full wifi access here at my house, it stopped letting me turn my wifi on on my iphone 4s yesterday, I've tried resetting and everything, idk what's happened and now I cant use my phone at all. Any ideas? Please and thank you!

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced.
    You can search the internet for heating and freezing solutions that might work (at least for a while).
    For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A

  • TS1398 Can't access without a password which I don't have.  Now what?

    Something I have apparently done has resulted in a requirement for a passwword in order to use wi-fi.  Previously it worked fine.   What can I do now?

    Your wifi network your connecting to is secured. It's not the iPad. It's your router(if your network) or someone put a password on, if its a shared like apt building or something. If its your wifi network, I'd check on how to access your router or reset it to factory fault settings(most by holding reset button with pin for 30 sec). Search how to access it, by googling your router make and model.

  • Help I can't access my Wifi after I reinsatlled Win7 on my Hp Pavilion dv6-6c35dx

    Hello My Name is Chris and I just reinstalled Win 7 on my laptop, howvever I cannot get my Wifi to work, I am missing a few drivers, can you help me out?
    here are the Hardware Id's of the drivers I am missing that I am missing
    PCI\VEN_10EC&DEV_8176&SUBSYS_1629103C&REV_01 - Network Controller
    PCI\VEN_10EC&DEV_5209&SUBSYS_1805103C&REV_01 - PCI Device
    I know you have to install the drives in order, the ony one I have installed so far are the network driver and graphic driver, I dont know where to find the chipset driver
    This question was solved.
    View Solution.

    Hi,
    Are you using Windows 7 64bit ? For WLAN, please use the following link:
       http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I can not access to Wifi Hotspot it says " Obtaining IP address"

    First I created Wifi hotspot but when I shut off the pc and then turn it on, I can not see it anymore
    I looked at control panel / network
    I can see the icon there but it is not working
    When I right click on the icon it says disable/rename/properties
    I think it is working but I can not see it is working

    Hi,
    Apologize for the late reply.
    I see the mode is set to disallowed.
    Please take a try to set it allowed using the following command:
    netsh wlan set hostednetwork [mode=]allow
    More information is shared in the link I posted already at my first reply.
    Or we might take a try to rebuild the hosted network as maelwliams suggested.
    Best regards
    Michael Shao
    TechNet Community Support

Maybe you are looking for

  • PDF files not getting generated

    Hi friends, Through our application we are generating PDF to network location. Suddenly it stoped from last month. I am not able to trace exact problem. forms version 6i we are using. PROCEDURE P_PRINT_GRN                                    (p_type V

  • How to send an email notification if no document in a library has been touched in 6 months

    The customer wants to receive an email notification if not a single document inside a document library has been not updated in 6 months. They don't want to get notifications based on single documents. They care only about the document library as a wh

  • Need to run the same query on different databases with the same argument

    Hi folks, I've a script: obj, which has simple stuff, when I execute @obj this asked me for the object_name and in return gives me object/s if it exists in this (connected) db. Now to check in 2 other dbs, I've to disconnect from here and then connec

  • SQL? two tables Need all in x where they are not in y

    I don't know why I am having a hard time with this, well, sort of;) I know it's simple but I need to have a query that compares two tables In table x, I have all the products. In table y, I have all the products with descriptions. The result should b

  • Poor resolution on playback of PNG slides

    I'm making a video presentation consisting of *.MOD segments and PowerPoint slides that have been converted as 25-90 KB *.PNG slides.  I burn the DVD. On playing the DVD on TV,  the slides have very poor resolution. What am I doing wrong? Thanks for