TS1398 Despite trying the recommended options listed above, my Ipad will not connect to our home Wi-Fi. The problem has only started happening this morning. The ipad recognises the wi-fi network but will not connect.
Despite trying the recommended trouble shooting options, my I pad will not connect to our home Wi-Fi network. The problem only started occurring this morning, and although it will recognise the Wi-Fi network, it will not connect.
Any other options I can try????
Try rebooting the router. Just pull the power for a few seconds. No settings are lost.
Similar Messages
-
When I ring someone from my iPhone 4 they can't hear me sometimes and other times they can hear me fine. This has only started happening since I updated to iOS 6 it was perfect the day before.
Good news! I believe I have fixed my phone!!
A friend of mine was having the same problem that I was having where you could hear other people but they couldn't hear you.
We fixed the problem by redownloading the 4.2.1 update. 4th post down on this page: http://forums.macrumors.com/showthread.php?t=1052794&page=5 is a list of links to the update files. I downloaded the one for my phone and did a restore (from a backup) after downloading the file and double clicking it so iTunes opens. Since I've done this my phone has been working perfectly again!
It might take you a few tries, it took my friend 3 tries until his worked right and it worked for me on the first try. I'm guessing something was screwing up during the download. -
When I try to use the sift key to capitalize a letter if makes a sift type noise. If I hold it down too long it makes the sift noise 3 times and then it doesn't capitalize but leaves the letter in lower form, ex: i instead of I. This just started this morning after downloading mountain lion last night. I had snow leopard previously. How do I turn this off?
Take your MBP to your local AS or AASP. Diagnostic testing is FREE! However, the repairs will be your responsibility as Apple warranty does not cover accidental damage. If you do decide to get your MBP repaired, send the bill to your ex-boyfriend.
My mom thinks that it's my fault somehow because it got kicked off my bed a long time ago, but other then that I haven't done anything to it.
Mom is always right! -
at the moment i have had a disc in for at least 20 mins and it's still 'finishing' sems a bit long for 17 songs . also the fan is on almost all of the time , maybe that has a bearing .. ? I'd appreciate some help here as it is getting increasingly frustrating . alao when i put in the discs that i have used they do not register on the desktop . so i have been wasting lots of discs doing this .
Thank you all .What brand of media are you using?
What error messages are you getting?
What application/s are you using to burn?
iDVD: Troubleshooting issues with burning discs
http://support.apple.com/kb/HT1583
Mac OS X: "Unknown Error -2147352480" when burning CD-R, CD-RW, or DVD-R media
http://support.apple.com/kb/HT2718 -
My iPod Nano 6th Gen keeps pausing. It does this sometimes immediately. Sometimes when the screen goes dark. Sometimes after like 15 minutes.
The screen keeps going off and on at random too.
I tried resetting the settings, resetting with the buttons, searching for additional updates, unplugging the headphone and replugging it TIGHT, and new headphones.
Not only is this annoying, but the power is draining MUCH quicker between the screen coming on and having to turn it on to restart it.If a restore of the Nano in iTunes to factory settings does not resolve the issue, it's likely hardware related, meaning you should take or send your iPod in for service.
B-rock -
Sorry - more information. Using it off iPhone 4S
Hello Theo,
I have a few recommendations for you. First if you havent already, restart the iPhone following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting http://support.apple.com/kb/ht1430.
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
I would also unplug power to your Apple TV and modem/router, wait a good 30 seconds, and plug it all back up.
If none of that gets it going again, then have a look at this article for troubleshooting Airplay:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215.
Cheers,
Sterling -
Whenever I try to access my banking information on firefox it only downloads a small portion of the display page. Also, when I try to open a PDF nothing happens when using firefox. I have the latest version of Adobe.
Hi Chris,
Well, I tried to delete the Caches and I threw all the .plist files related to microsoft in the trash -- athough I don't know if this is the way to delete files but I haven't found another yet....
From your other suggestions, it seems to me that you have the impression that I want to stop using Microsoft Office (it was 2007, I made a mistake) though... but this is not the case.
So... tell me if I misunderstood correctly or if I did anything wrong, or if you have anything else to suggest...
Thanks a lot anyways!
Stephanie -
The back and forward browser button always works when we first get online, and then over some time it will not work and then will work again (working again is happening less). I have re-started the computer many times to fix the issue.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Without notice the contents of my homepage transferred to a smaller font. The photos also became smaller. When I go to the graph calendar page to enter an event, that page also has very small font.
Reset the zoom level for that page.
See this:
https://support.mozilla.com/en-US/kb/Page+Zoom -
While browsing in Releaselog, I can't open a new Tab from a link(Ctrl left button). It opens in the same Tab and has just started happening this week. All other websites are ok.
You're welcome
-
Just got comcast triple play. Original ipad sees network but will not connect.
Just got comcast triple play. Original ipad sees network but will not connect.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
just bought ipad 3 and trying to connect to home wifi, can see network but will not let me progress to enter router password?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.
Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system. -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
My Macbook Pro will recognize my network but will not connect to the internet
My macbook will not connect to the internet at home. It works fine on other networks, but at home it will recognize my network name but says it will not be able to connect to the internet. This issue just sort of came up randomly. I have shut the router off (I use Verizon Vios) and reset it and that doesn't work. The little Wifi status at the top of the screen just has an exclamation point over it. I haven't changed any of the default network settings. It just stopped working. When I take it to work and use their network or free wifi available at stores etc...it connects just fine. A few weeks ago upgraded my operating system to Mavericks, but it has worked up until this morning.
Do this. Go to Apple menu / System Preferences / Network.
In the left column, click Wi-Fi. Next click Assist me, then Assistant. Follow the on screen instructions.
Maybe you are looking for
-
T510 inaccurate touchpad in WIN 7 - in Linux it is far better
I am not sure if you guys tried linux (ubuntu distro) before but I realized that the trackpoint and touchpad, especially the responsiveness of the touchpad for the thinkpad t510 when on the linux operating system is extremely responsive and fluid tha
-
Reflection of the received Signal for Channel Sounding
I am trying to use a USP NI 2920, under Labview control, in order to make a sort of channel sounding. The USRP generates a pseudonoise (PN) sequence that BPSK modulate the carrier sent to a TX antenna. The same USRP runs a receiver process that acqui
-
Lightroom keyword hierarchy behaviour
what is the conceptual difference between explicitly adding a top level keyword to an image vs having the top level keyword being added automatically by adding one of its lower level "child" keywords to the image? I don't see why there should be any
-
Am trying to convert jpeg file to pdf. When I scan file it comes up in jpeg.?
When scanning doc it comes up as jpeg. How do I convert to PDF?
-
Trace a particular transaction usage
Hi All, I have a requirement in which i have to have a log of all the users who used a particular critical transaction (let's say SU01). Preferably, i would need to have an alert to be triggered whenever someone tries to access this transaction. Is i