TS1398 Frustrated lost WIFI on IPAD 1 the day the new IOS came out, which 1 does not have. Tried everything listed, what next?

Have done everything possible, spent hours reading every tip possible. What can I do, is Apple aware that lots of folks who did not update to IOS6 lost their WIFI on the 18th?

Has nothing to do with the iOS 6 release on 19 Sept. and which can't be installed on the iPad 1.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Do I need Daq s/w while running a Labview exe which contains the DAQ hardware cards on a pc which does not have Labview s/w

I am having a Labview 6i program which takes hardware status from the NI hardware cards...now I make its exe with Labview Run Time Engine & then I am unistalling complete Labview with "Remove all" option....then I am installing this exe......Do I need DAQ or MAX now ?

Hello,
If you have an executable with DAQ functions in it, then you are required to have NI-DAQ installed on the machine.
Also, please post your LabVIEW/DAQ questions in the appropriate category...this category is for questions pertaining to the NI product "Measure for Windows", which you do not appear to be using.
Have a nice day,
Darren N.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
LN

Why is it that we are shown the new Lion OS only on a MacBookAir and not on an iMac which does not have a swipe facility?

Why is it that we are shown the new Lion OS only on a MacBookAir and not on an iMac which does not have a swipe facility?

I think Apple are so proud of the new gesturing system that they overemphasized it. I also think that they are emphasizing the swiping to attract phone and iPad users, who use swipes exclusively.
Last time I ws in Barcelona, there not only was no snow, it was very hot indeed. I have a cousin living there

How do I connect Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

The FireWire cable is just for the FireWire ports on the display. The display will run without it.

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,@

yes,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my came

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my camera. Is there any other way i can install this on my camera without using the provided cd or buying the software again?

That doesn't help the user with the serial code though.
There has to be some kind of code somewhere within the package. The disk itself does not contain one. You can look here for help with finding your serial number:
Find your serial number quickly

Hi, I am trying to find out a bit more about creative cloud... I currently use PS5 extended... I have it on my desk top at home but travel often and use a pc. which does not have PS5 because it is licensed to mac... So i am now thinking of using the

hi, I am trying to find out a bit more about creative cloud... I currently use PS5 extended... I have it on my desk top at home but travel often and use a pc. which does not have PS5 because it is licensed to mac... So i am now thinking of using the cloud... will i be able to use it on both computers? and will it work if there is slow or no internet?.

Here are some links to general information. IF you have specific questions feel free to ask...
Creative Cloud Learn & Support
http://helpx.adobe.com/creative-cloud.html
Creative Cloud / Common Questions
http://helpx.adobe.com/creative-cloud/faq.html
Creative Cloud Plans
https://creative.adobe.com/plans

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install my upgrade without using the cd's?

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install the upgrade without using the cd?

PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

How to find the deliveries which does not have Carnot and SHPCON

I have a scenario where for some of the deliveries no CARNOT idoc or SHPCON idocs were not been created or went into error, i have verified it in by going to we05 and found there were many idcos in error and some of the idocs were been set to status 68 and they were manually processed by users. is there any table where i can extract the deliveries which does not have SHPCON idocs created.

hi,
you have to take two steps in this:
first step:
Table EDIDC which contains EDI Control records.
which stores the partner number,partner functions & message types.
2nd step:
take that partners and get deliveries from LIKP table.
regards,
balajia

Why does my .exe file run on the PC I created it on, which has LV installed, but it will not run on a PC which does not have LV installed?

I am trying to run a stand alone application on a PC which does not have Lab View installed. I created the executable file and the installer. However, when I run the .exe the VISA functions contained in the VI return error messages and the power supply I am trying to control does not respond. The stand alone application will run on a PC that has Lab View installed.
My application initially used a VISA resource control to selct the instrument GPIB address on the PC I used to create the application. Since the PC I am trying to run the .exe on has an older version of NI-MAX I cannot create aliases that the VISA control can interpret.I have tried to upgrade NI-MAX hoping that would solve my problem:
Here is what I tried:
uninstall NI-488 and NI-MAX ( if you want to uninstall MAX you must uninstall NI-488 ) reinstall NI-488 and NI-MAX Ver 3.1 then try to install NI-MAX version 4.1 which I downloaded from NI website. When I do this I get an error message when I try to run MAX. None of this worked so I hard coded the instrument address as a constant and again that works on the PC with LV installed but does not on the PC without LV.
Any input would be greatly appreciated.

It looks like you do have the LabVIEW runtime engine installed. It might be that the VISA drivers you have are not compatible versions. In NIMAX, look under software to see what versions of VISA software you have installed on both systems.
It does not matter what version of NI MAX you have installed, since your application does not use NI MAX. NI MAX only helps you look at (or simulate) the hardware and software you have on your system.
One thing you could do is include drivers and the runtime engine while creating your installer. That way, you should be able to do a complete install on a clean system.
Message Edited by Sudhir Gopinath on 06-19-2007 12:26 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor

I am currently using the Airport Express to work with a Bose Wave radio. 3.5 MM jack out and phono connectors into Bose. Is there a way to hook to a new Bose Wave which does not have phono input plugs?

I am currently using the Airport Express to work with a Bose Wave radio. 3.5 MM jack out of the Express and phono connectors into Bose. Is there a way to hook to a new Bose Wave which does not have phono input plugs?

The latest Bose Wave SoundTouch music system still uses a single 3.5 mm analog Aux port. You would connect the two using an analog audio cable with 3.5 mm stereo jacks on either end.
An example cable would be located here.

HT201303 how can i recover my lost iphone which does not have tracker

how can i recover my lost iphone which does not have tracker.. plz plz help..

You would have to do as you would if you lost any other item. Look for it.
There is no way to track it without find my iphone.

I'm trying to download itunes onto an external harddrive, but it keeps defaulting to my computers drive which does not have the room. How do I sort this please?

I'm trying to download itunes onto an external harddrive (named as D) which has loads of space, but it keeps defaulting to my computers (C) drive which does not have the required space. How do I sort this please?
I've tried selecting the D drive but, it still defaults to my computers drive and wont let me change it.
Heeeeellllllllpppppp!

I think you've misunderstood.
iTunes ONLY works on the C drive. There is no moving it. End of discussion.
The MEDIA can be house on any other drive (internal or external).
Install iTunes correctly using the default options.
Once it is installed and working correctly with everything on the C drive, close iTunes.
Follow the instructions here: http://support.apple.com/kb/HT1364 to move the iTunes media folder.

TS1398 Frustrated lost WIFI on IPAD 1 the day the new IOS came out, which 1 does not have. Tried everything listed, what next?

Similar Messages

Maybe you are looking for