TS1398 Hi...My wifi is not working. It is not dimmed out. When I turn it on it does not pick up any of the networks around me (I know there are a lot of networks available) I have tried resetting my wifi with the steps above but it still does not work. Pl

I have the most recent update.

That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

Similar Messages

I have downloaded Firefox but it will not open. I have tried several times to install and then uninstall, but it still does not work.

We used to use Firefox..but for whatever reason it stopped opening. We uninstalled it and we found that the old version of Firefox would open but it would straight away update to the new version and then the problems would begin again and it would not open.

Using another browser, download the FULL installer from
'''[http://www.mozilla.org/en-US/firefox/all/ Download Firefox Full Installer For All languages And Systems]''' {web link}
Save the file. Then;
Using your file browser, open the '''Programs''' folder on your computer.
'''Windows:''' C:\Program Files
C:\Program Files (x86)
'''Mac:''' Open the "Applications" folder.
'''Linux:''' Check your user manual.
Look for, and rename any Mozilla and Firefox folders by adding '''.old''' to them.
Now run the full installer.

I am getting a "blocked plug in" message and cannot watch videos. I have tried "deleting all" and uploading flash player again but it still doesn't work.

blocked plug in message

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button.
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   The next step is important.
   Click Safari in the menubar and select “Quit Safari”.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
3. Safari > Preferences > Privacy
    Press the button “ Remove All Website Data”.

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

Ditto. Guest accounts shouldn't have a password. No way to enter one in System Prefs...

I am trying to log on to iwork but it keeps saying that my password is incorrect. I have already reset it and entered my new password and it still is not working. what should i do?

I am trying to log on to iwork but it keeps saying that my password is incorrect. I have already reset it and entered my new password and it still is not working. what should i do?

I really can't comprehend the logic that leads to believe that password for old apple id will come to e-mail for new id. Buy may be I just misunderstood something. Contact Apple for assist with password retrieval. If you can verify yourself as account owner they may be able to help you.

I am trying to sync some videos on to my iPad. I have tried .avi, .mp4, .mpeg, .mpeg4 and .flv formats but my iPad is not getting synced. What shall I do?

I am trying to sync some videos on to my iPad. I have tried .avi, .mp4, .mpeg, .mpeg4 and .flv formats but my iPad is not getting synced. What shall I do?

Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

I have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens. It will work in my docking station but as soon as i take it out it will not respond. any ideas, do i need a new battery?

i have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens. It will work in my docking station but as soon as i take it out it will not respond. any ideas, do i need a new battery?

It definitely sounds like your Nano needs a new battery at this point. You can have Apple replace it for a flat fee, send it into a third party service center to be replaced for much less, or you can purchase a new battery online and swap it out yourself if you feel up to it.
B-rock

HT204074 I went to buy a song on iTunes and it said I have already purchased this item, but it's not in my library. Is there a way to populate songs that I have downloaded on past computers with the same apple ID?

I went to buy a song on iTunes and it said I have already purchased this item, but it's not in my library. Is there a way to populate songs that I have downloaded on past computers with the same apple ID?

If iCloud is available for your country, you should. Here is the article that has the steps on how you can do this:
http://support.apple.com/kb/HT2519

I have unlocked my iPhone 3G with Vodafone via iTunes, but now the downloaded apps crash immediately when opened. I've tried a Restore, but this didn't help. I've also tried removing all apps and re-installing them, but they still don't work. Any ideas?

I have unlocked my iPhone 3G with Vodafone via iTunes, but now the downloaded apps crash immediately when opened. I've tried a Restore, but this didn't help. I've also tried removing all apps and re-installing them, but they still don't work. Any ideas? Thanks.

yep, unfortunately can't reset without the passcode either.
With regards to doing a restore, do you mean:
open itunes on my computer
click on my device on the left
go to the device summary
click restore
it then asks if i want to back up before i restore (to which i say no)
then it asks me if i'm sure I want to restore to factory settings and that all of me media and data will be erased and replaced with the newest version ( to which I say yes)
then it takes about 90 mins to do this but when I look at my phone, everything is exactly the same.
Am I missing something? Obviously I'm technologically challenged, but I HAVE to get to the bottom of this!

HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

Welcome to the forums.
Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings. You could start a new iDVD project, or try deleting encoded assets.
Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have). Double layer DVDs can be finicky and are used for video more than 2 hrs long.
Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
For a detailed treatise, see: https://discussions.apple.com/thread/3926901?tstart=0
John

After restoring my iphone 4,it went o and i haveto restore it again,but this time,there are errors like,error 21.which i have trie fixing several times.what do i do,its so frustrating.

after restoring my iphone 4,it went o and i haveto restore it again,but this time,there are errors like,error 21.which i have trie fixing several times.what do i do,its so frustrating.

Hi ..
Help for error 21 > Resolve iOS update and restore errors

Most of my iPhone 4 memory is taken up with "other" there is no reason for this. I have tried to clear as much history as possible but cannot reduce the size of this.

Most of my iPhone 4 memory is taken up with "other" there is no reason for this. I have tried to clear as much history as possible but cannot reduce the size of this.

Try
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)

TS1702 Hi. I tried all the steps above but I still cannot open any of my apps. They close instantaneously. Any one have any insight? Thanks!

Hi. I tried all the steps above but I still cannot open any of my apps. They close instantaneously. Any one have any insight? Thanks!
This happened after I got my carrier to unlock my phone.

Hi, I tried all the steps listed in these forums and they didn't work (I deleted the apps and added them back, I dled a new app, I signed in and out of my acct, I synced my phone, I did a reset holding down the power and home button, etc.). Finally I just restored the phone and added back the apps I wanted. That took care of it. Thanks.

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion... Help!!!
Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

TS1398 Hi...My wifi is not working. It is not dimmed out. When I turn it on it does not pick up any of the networks around me (I know there are a lot of networks available) I have tried resetting my wifi with the steps above but it still does not work. Pl

Similar Messages

Maybe you are looking for