TS1398 how do i configure so i phone connects with home wireless automatically? currently, it connects to prior owners wireless since disconnected.

how do i configure wifi so my Iphone connects w home wireless automatically?

Hi Tesserax
You could, but its benefits may depend on how you have it configured with the D-Link router. That is, do you have the TC directly connected to the D-Link by Ethernet or is it just wirelessly joining the D-Links' wireless network?
I have the TC connected via Ethernet cable.
I am assuming that you have the 802.11n AirPort Express Base Station (AXn) configured as a wireless client so that it can join the D-Link's wireless network for iTunes streaming ... correct? If so, then it would be performing like any other wireless client (desktop, laptop, printer, etc.) and will not interfere with the D-Link's wireless network.
I rechecked the AE and you are correct that the AE is set to join a wireless network.
With having so many devices running on the wireless network, would it make sense to have a few device on each wireless system?(D-Link, TC, and AE)
I know it sounds like overkill, but there is the possibility that all the devices could be running at once. I'm not sure if that would cause any conflicts.
Is there any advantage to turning on the wireless on TC just for the iPhones for example or is it better to keep things as they are?(It works but is it efficient?)
Please be aware I'm not fully knowledgeable with wireless routers and their capabilities.

Similar Messages

How Do I Configure A WRT54G to Work With A Cisco 2800 Router

I'm helping my dad set up a new network. He has a Cisco 2800 series router that connects to the internet via two T1 lines. From this connection, he supplies internet service to his customers. The router was installed and configured with help from AT&T who monitors the router and advises my dad if there are problems.
The Cisco 2800 is not my reason for posting.
He wants to connect his home computers to the 2800. He has one desktop and two wireless laptops and wants to use a WRT54G to connect those computers to the 2800 router. How should he configure the WRT54G to connect to the 2800?
Thanks!

That's what I thought. So it is really no different than connecting the WRT to a DSL modem or cable modem as far as the setup goes. Good then.
Now, next question;
Would this network setup be correct?
Connect a 5-port switch to the 2800
Connect the WRT54G to the 5-port switch.
Configure the laptops to connect throught the WRT54G.
Connect the desktop (Ubuntu 9.10) to the 5-port switch via Ethernet cable (bypass the WRT54G).
Would there be IP conflicts or domain problems? I ask this because this is how his LAN is presently setup and he seems to be getting random connectivity problems on his Ubuntu desktop machine. One day it works fine. The next day it won't connect. Sometimes, even after he is connected, it stop works midstream. It also takes 10 minutes or so to boot up. The laptops always work without issue.
The two laptops would be issued IP addresses of 192.168.1.xxx but the desktop would be getting 12.83.xxxx.xx(something similar). The desktop's internet IP would receive its internet IP from the 2800 via DHCP just like the WRT54G is receiving its IP from the 2800. The two would essentially be on different LANs connected to the same router. Do you forsee any issues here?
Thanks!

How do i configure my airport to work with my other wireless router

how do i configure my airport to work with my other wireless router? I want to be able to listen to itunes through my speakers wirelessly.

Please check out the following Apple Support article for details on the many methods to use an AirPort Express for iTunes streaming.

How,can,i,recovery,photos,from,phone,5,with,,broken,screen,,in,recovery,mode,and ,has,password

How can i recovery photos from phone 5 with broken screen inrecovery mode and has,password

Hi Tsorbie,
I am sorry to tell you that you cannot recover photos once your iPhone is on recovery mode.
Regards,
J_Kim

How do I configure the number of connection in the pool for webservice axis

Hi
How do I configure the number of connection in the pool using xml.
We are using axis 1.4 and commons-httpclient-3.0.1Is there any way we can do it using the client-config.wsdd file.
We do not want to do any modification in the code for this.
Is it possible to set socket timeout also in the wsdd file.
Your resolution will be really helpful for us.
Thank You
Ottran

Export them at a smaller size:
File -> Export - not the options at 'Size'
Regards
TD

How can i dial up a phone number with iPad?

How can i dial up a phone number with iPad?

Smartgroschen is for free calls and text chatting. You can also use chat with video clips, pictures and your current position on the map. Smartgroschen is an instant messenger that allows you to connect with any Smartgroschen-user worldwide for free.At start you get 0,50 euro.

HT4906 So how do i sync my i phone 5 with my mac book pro for photos

So how do i sync my i phone 5 with my mac book pro for photos

Getting photos off the phone? Use iPhoto or Image Capture (in your Applications Folder)
Getting Photos on to the Phone? Use iTunes.

How could I undisable my I phone 4s with out using iTunes

How could I undisable my I phone 4s with out using iTunes

Kittyyy wrote:
How could I undisable my I phone 4s with out using iTunes
You don't. ITunes is needed.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

I have some OLD software on my Mac Pro. How do I know if it will work with Snow Leopard? Currently I'm using 10.5.8.

I have some OLD software on my Mac Pro. How do I know if it will work with Snow Leopard? Currently I'm using 10.5.8.

Michael Wasley's link (wikidot) is as accurate as any I can find.
It's still wise to check with the vendors' websites for compliance.
Biggest source of problems seems to be printer and scanner drivers.
Appleworks 6.2.9 works fine in SL under Rosetta (note; Rosetta is installed by default in Leopard - in SL you may have to select it from the optional installations).
Check particularly with Adobe products; some you'd think should work ok suddenly don't.

How do I configure Time Capsule as backup with an existing d-link router?

I just purchased a 1T Time Capsule. My original idea was that it would replace our d-link router. However, I was not happy with the speed and connectivity compared with the totally awesome D-Link (Dual Band DIR825), which is solid and connects and stays connected with all computers in my household. So, now I want to use the Time Capsule as the backup for three MacBooks (all running the latest OS).
So... how do I set this up so that it will work? I have a total of three MacBooks and three PCs, but only the MacBooks need to backup to the TC. I handle the PC backups separately.
I am new to the Mac world, but am relatively comfortable with computers. Networking not so much!
Equipment: D-Link DIR 625 attached to a Cisco high speed modem attached to the Comcast all in one digital voice modem. I get the fastest home Internet Comcast can provide.
1 new MacBook Pro
2 older model white MacBooks
Also, is there any way I can set up print sharing through the Time Capsule? It doesn't work well over the PC network, and the USB share utility that comes with the D-Link router is terrible.
I have an older HP Laserjet 3030 and a newer Canon Pixma 970. Neither printer is wireless.
Any help you fine people can give me would be much appreciated!
Thank you!
Linda H.

OK, thanks for the info. Let's get the TC setup to work with your Macs for backups and then tackle the printing question as a separate item.
Connection wise, you will connect an ethernet cable from one of the available LAN <-> ports on your D-Link to the WAN (circle icon) port on the TC.
To make the TC configuration simpler, rather than using wireless to configure the TC, temporarily connect another ethernet cable from your Mac running Snow Leopard to one of the LAN ports on the TC
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
(You may be asked if you want to update AirPort Utility. If so, go ahead and update and then restart AirPort Utility again.
After you have clicked the Manual Setup button...
Click the Time Capsule tab below the row of icons to assign a name to your TC, device password (write this down) and adjust Time Zone Settings
Click the Wireless tab below the icons
Wireless Mode = Off
Click the Disks icon above the Time Capsule tab
Click the File Sharing tab
Make sure there is a check mark next to Enable File Sharing
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update at the lower right and the TC should restart in 15-20 seconds and you should have a green light.
As a check, open your Macintosh HD and look for your Time Capsule icon under the SHARED heading on the left side of the panel. If it's there, that's good.
If it's not, click anywhere on the open desktop to display the Finder menus at the top of your computer screen.
Click Finder, then click Preferences, then click the General tab
Under the heading of "show these items on the desktop" make sure that there is a check mark next to "connected servers"
You should now see the TC icon under the SHARED heading. If not, try restarting your computer.
Keep the ethernet cable connected between your Mac and TC for the first complete Time Machine backup as it will go much quicker with ethernet. You can do subsequent backups using wireless since they will only take a few minutes each hour.
Not sure if you want to setup Time Machine at this point or concentrate on the printers.
Please post back on your progress.
Message was edited by: Bob Timmons

HT202157 how do I configure my mac book air with apple tv

how do I configure my mac book with apple tv

Setting up Home Sharing for Apple TV (2nd & 3rd generation)

I have I-phone 5 with 15GB. I currently have used 12.8 GB. I get error message that storage is almost full, go to setting and mymail is 5.7 GB. Can that be how alot of my storage is being used? If so or not any advise?

I have I-phone 5 with 15 GB. I currently have used 12.8 GB. I get error message that storage is almost full, I go to setting and my mail is using 5.7 GB. Can that be how alot of my storage is being used? If so or not any advise?

caek1 wrote:
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this.
It means exactly what it says... The email Address is in Use. You cannot re-use it.
Apple ID Support > http://www.apple.com/support/appleid/

HT1277 I want to set up my email composition with a default me@alumni.myschool.edu address that is different from my ISP. How do I configure? Command line OK with me.

Hi everyone,
I want to set up my email composition with a default [email protected] address in the "Reply-to" field that is different from my ISP. How do I configure mail to set this default?
I have looked through the help and fail to see an option in the Preferences -> Compose window.
I am OK with UNIX Command line tasks if that is the only way to set this default.
Basically I have an alumni email redirection service, which is an address that never changes, even if I change ISP. That way all my friends can use it an never change. However, they tend to use whatever ISP address is, not what I have asked them to use.
I want to force emails I send to default to my alumni address when my friends reply, not my ISP address. I want control over this.

Confused Once Again wrote:
I want to set up my email composition with a default [email protected] address in the "Reply-to" field that is different from my ISP. How do I configure mail to set this default?
Email preferences --> select Account --> Account Information tab --> Email address.
The Email address setting supplies the "from" mail address in a sent email for that account.
I been doing this for years (well in Eudora but it works in Mail too) since my return address is a mail forwarding service. That lets me switch ISP's and no one is ever the wiser. I just change the forwarding service "pointer" to point to my new ISP. But everyone else see sees the same "from" address as it's always been.

How can I sync my android phone calendar with my iPad

How can I sync my android phone with my iPad ?

To move Contacts, calendar data, etc. information from Android to iOS you can use third party Apps on both devices the Apps will move this information to the "Cloud" with one App and back to your other device with another App.
See, for example, PhoneCopy at http://www.phonecopy.com/en/

TS1398 How do I get my iPad to remember my home network? I already switched on the "automatically join known networks"

How do I get my iPad to remember my home network? I already switched on the "automatically join known networks"

turn off all of the ipads, (not put them to sleep but turn them off) then unplug your Wi-Fi router for 2 mins. Plug it back in and when all the lights are (green or blue, depends on who makes the router) turn on one ipad and then connect it, wait 3 mins and turn on the other and connect it, do this for each iPad and it should fix the problem.

TS1398 how do i configure so i phone connects with home wireless automatically? currently, it connects to prior owners wireless since disconnected.

Similar Messages

Maybe you are looking for