TS1398 How do I connect to the internet with my iphone when away from home

I have an iphone 3GS which was fine , was able to connect to the internet away from home when at uni, at appointments. Since software update to IOS 6.0, can now only connect to internet wirelessly when at home-as soon as leave the house it disconnects. Is this just because of the software update? Have tried adjusting settings but got nowhere. Thank you

When your wifi is off.  Do you see your carrier name at the top left with either 3G/4G.  If not you can try a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.
or settings - cellular - cellular data - ON
if those two suggestion doesn't help then you will need to contact your phone carrier to resolve the issue.

Similar Messages

  • I want to use my iPad with a projector using apple tv. How do I homeshare if the iPad cannot access itunes when away from home?

    I want to use my iPad to give presentations using Apple TV. How do I get the two to homeshare so that they "talk" to one another. Instructions say use iTunes but I am getting very confused over why this is necessary when all I want to do is link 2 pieces of equipment without having to use wi-fi.! Wi-fi won't be available at the locations where I have to give presentations. Help!

    Thanks Dave. There is still a problem. The iPad will only stream to the projector whilst connected to Wi-fi. The icon disappears from "iPod" on the iPad (the only place it appears, not iTunes as the instructions say) once Wi-fi is disconnected. Only audio will stream, no icon appears in the drop-down menu to show that pictures will go over. The outcome of courrse is that, as it stands, the iPad cannot be used for presntations using Keynote, neither can it be used in a location without Wi-fi, which rather defeats the object of have having bought the equipment in the first place having been assured that with Apple TV it would be possible. Is there anything else I can try? I would add that I have downloaded any available updates to Apple TV. All itmes were bought 3 weeks ago so should be reasonably up to date anyway.

  • How do I connect to the internet with my new IPAD ?

    How do I connect to the internet with myt new Ipad

    See here for connecting to the Internet:
    http://support.apple.com/kb/HT1695
    If you have any problems there is troubleshooting advice here: http://www.apple.com/support/ipad/wifi/

  • How do i connect to the internet with my ipad?

    how do i connect to the internet with my ipad?

    Did you turn WiFi on in the Settings App? If WiFi is turned on, your iPad should be able to see any WiFi networks that you can connect to and you should be able to tap on one of those, enter a password if needed and then tap the join button.
    I get the feeling that you know this and the problem needs further explanation so ... Can you explain in more detail?

  • How do i connect to the internet with apple tv

    how do i connect to the internet with apple tv

    Ethernet cable from your router, or configure wifi in Settings.

  • How do I connect to the internet with Airport for the first time?

    I just got my Airport express and I've been trying to configure it to connect to the internet but it doesn't work and I can't find info on the configurations. I have an ethernet "modem" which I used to connect the cable coming from it to the computer and now I connect it to my Airport. Although the green light is on and in network preferences, it tells me I'm connected to the internet, I can't browse the internet with Safari, etc. I've been trying to find information on how to configure the base station in Airport Admin Utility but there is no specific information. Is there anyone who could help me telling me how to set up the IP adress, if I need one, DHCP, preferences in Airport Admin Utility?? If the ethernet cable is connected to the computer directly I don't need a user ID or anything... It's all setup automatically.

    As a minimum, in order to gain access to the Internet with an AirPort Express base station, you will need an Internet Service Provider (ISP) AND an Internet modem or gateway device.
    What is the make & model of the Internet modem or gateway device that you have the AirPort Express directly connected to by Ethernet? What exact model of Express do you have?

  • How do I connect to the internet with Airport Expess?

    In Airport Utility I get an orange icon and the Airport Express light is green. In the internet box
    coming from the globe picture it says Interent connection Disconnected and there is no router address
    and no DNS server information shown.

    As a minimum, in order to gain access to the Internet with an AirPort Express base station, you will need an Internet Service Provider (ISP) AND an Internet modem or gateway device.
    What is the make & model of the Internet modem or gateway device that you have the AirPort Express directly connected to by Ethernet? What exact model of Express do you have?

  • How do I connect to the internet with the "Manual" PPPoE option?

    Hi,
    I have a Time Capsule and a PC with Windows XP SP3, Airport utility 5.3.2
    I connect to the ISP using a secureID - a password that changes every minute.
    This means that if I use the "Always On" option, then once the connection breaks the time capsule will retry with an invalid password and lock me out.
    I therefore tried the "Manual" option, but there is no "CONNECT" button associated with it. When I choose "Always On", the time capsule connects to the internet. When I choose "Manual" the time capsule has a happy green light, but I don't have internet.
    Did somebody forget to put a "connect" button somewhere, or is it just hiding?
    Any help appreciated.
    Thanks,
    Omri

    Ethernet cable from your router, or configure wifi in Settings.

  • How do I connect to the internet with a datacard?

    Hi, I have just brought a mac book pro and am in the process of finding an ISP. I don't have a BT line and don't want to pay for one, so it narrows down my options! I have checked out NOW wireless internet and cable but they don't work in my area (NW2 london). I don't have a sky box. So looks like the best option for me would be a datacard I could plug into my laptop. Only prob is that most of the major ph companies only have the PCIMA cards which won't work in the new macs. Vodafone is bringing out a new card in autumn which will work, but does anyone know anyone who makes cards which will work on my mac now?
    Thanks so much!! I have looked long and hard on internet and can't find any!

    I got the same problem, when I change my Powerbook to a Macbook pro... The answer, is there is no datacard available... not yet..
    The solution is to have a bluetooth phone that support 3G... (GPRS is a bit slow)
    So, just follow the instruction on that website to set-up your connection...
    http://pukupi.com/articles/vodafone/
    You still have to get from vodafone some information if you don't have them... Make sure you ask them the good question, sometime the techi guys freak out when you say you want to connect a MAC...
    what you need is :
    GPRS CID String
    Username
    password
    In Ireland it's as follow :
    GPRS CID String : *99#
    Username vodafone
    password vodafone
    you could try... if it work, you are in... Make sure you watch the data you transfer, it can get VERY EXPENSIVE... I would suggest Email access only... try avoid downloading file.
    Hope it help.
    MCBP 2.16   Mac OS X (10.4.7)  
    MCBP 2.16   Mac OS X (10.4.7)  

  • How can I access my home sharing when away from home?

    how can I access my home sharing music from my computer to my iphone
    when away from home?

    Welcome to the Apple Community.
    You can't. You can only homeshare over your home network.

  • How does Imac connect to the internet?

    How does Imac connects to the internet?

    Through your ISP (internet service provider); once you set up an account with them, you can decide to connect via ethernet cable to their modem, or, if you have a router (which is connected to their modem, you can connect wirelessly.
    Is that what you were wondering about or did I misunderstand your question?

  • Ive forgotten the passcode to my ipod touch and we've just got a new internet so its not connected to the internet so i cant restore it from recovery mode how would i restore it?

    Ive forgotten the passcode to my ipod touch and we've just got a new internet so its not connected to the internet so i cant restore it from recovery mode how would i restore it?

    An internet connection is required.
    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    
    For without iTunes
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.

  • How can I fix the problem when I can't completely erase find my iphone from my mac? It says "pending erasa find my iphone until your iphone connect to the internet". My iphone already connected to the internet and it still doesn't work. Anyone have idea?

    Actually I want to restore my iphone from my mac but I can't because it says "go to icloud settings on your iphone and turn off find my iphone before restore your iphone". Then, I go to icloud.com and erase find my iphone. But I still can't restore my iphone because it says pending to erase your iphone until your iphone connected to the internet. My iphone already connected to the internet and it still says pending. Please help me to fix this problem because I need to restore my iphone.

    Hello rxander21,
    Force your iPhone into recovery-mode and then you can use iTunes to restore it.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • WRT 120N- Cannot connect to the internet with more than one PC at a time.

    Before I went on a three month vacation,I could connect 3 or 4 PC's either wireless or wired to my router with no problems at all.I have a desk top and a laptop computer which I use at home.After I returned,I found that I could connect to the internet with only one PC at a time.
    If I was say,connected via my laptop,my desk top would continuously keep getting disconnected and vice versa.I have been reading the suggestions from experts here and have done a few checks based on them.I also cannot get to my router page which is 192.168.1.1 I keep getting a message that says "Problem Loading Page" and this happens with both,Firefox and Internet Explorer.I am running Windows 7 - 32 bit on my desk top and Vista Home Premium on my laptop.
    I have opened the "Command Prompt" dialogue and pinged 192.168.1.1 and thereafter I typed in "ipconfig".These are the results:
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
    C:\Users\Gordon>ping 192.168.1.1
    Pinging 192.168.1.1 with 32 bytes of data:
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Ping statistics for 192.168.1.1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Users\Gordon>ipconfig
    Windows IP Configuration
    PPP adapter Brownwolf:
       Connection-specific DNS Suffix  . :
       IPv4 Address. . . . . . . . . . . : 92.98.42.65
       Subnet Mask . . . . . . . . . . . : 255.255.255.255
       Default Gateway . . . . . . . . . : 0.0.0.0
    Ethernet adapter Local Area Connection* 22:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Wireless LAN adapter Wireless Network Connection:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:35a2:8753:8832:f494
       Site-local IPv6 Address . . . . . : fec0::c:35a2:8753:8832:f494%2
       IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:35a2:8753:8832:f494
       Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:a408:59a3:918e:f0ab
       Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:a408:59a3:918e:f0ab
       Link-local IPv6 Address . . . . . : fe80::35a2:8753:8832:f494%12
       IPv4 Address. . . . . . . . . . . : 192.168.0.1
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:413:cf4f:77af:474d
       Site-local IPv6 Address . . . . . : fec0::c:413:cf4f:77af:474d%1
       IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:413:cf4f:77af:474d
       Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:1591:ad9:13da:8fea
       Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:1591:ad9:13da:8fea
       Link-local IPv6 Address . . . . . : fe80::413:cf4f:77af:474d%11
       IPv4 Address. . . . . . . . . . . : 192.168.1.100
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : fe80::35a2:8753:8832:f494%11
                                           192.168.1.1
    Tunnel adapter Local Area Connection* 7:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 11:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 14:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 15:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 19:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 20:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41::5c62:2a41
       Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
    Tunnel adapter Local Area Connection* 23:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 24:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 28:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    I presume that this model is a modem **bleep** router as I do not have a separate modem with my system.I have a DSL connection and the firmware version of my router is ver.1.0.If I recall,I did upgrade to the next firmware upgrade a few months after I purchased the router but I am not sure.
    I use both my PC's to run a small business venture and I am worried that resetting the router may cause some other problems and will stop me from using the internet.
    The Command Prompt information above was taken from my laptop.
    Any help will be really appreciated.
    Gerard.
    Solved!
    Go to Solution.

    brownwolf66 wrote:
    No,I have a desk top and a laptop and I cannot access 192.168.1.1 on either of them.In my OP,I have used the Command Prompt dialogue on both computers to ping 192.168.1.1 and I have attached the results.This is what I got:
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
    C:\Users\Gordon>ping 192.168.1.1
    Pinging 192.168.1.1 with 32 bytes of data:
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Ping statistics for 192.168.1.1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    The results I obtained using ipconfig in the command prompt have already been mentioned in my OP.
    I do not know if the above result is what it is supposed to be but I still cannot access my router's home page.How do I verify if there is a proxy server and if there is one,how do I disable it in my browsers?This problem occured suddenly as a few months earlier all was well.It's getting rather frustrating.
    I suggest resetting the router. Make sure firmware is updated. You can download it here - http://homesupport.cisco.com/en-us/support/routers/WRT120N. After firmware upgrade, reset and reconfigure. Just access the link below to guide you setting up the router.
    * Setting up a Linksys router for DSL Internet connection
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
    * Setting up a Linksys router with Cable Internet service
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

  • My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

    Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem.  Windstream tech service is useless.  i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help!  windstream said everything is working on their end, yea right.  What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products. 
    these are brand new machines with lion.
    This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great.  Please help before my wife losses it
    thanks

    There is a 2701HG-B, and a 2701HG-D.  If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
    By the way tell your wife it isn't that bad.  At least you have an ethernet DSL modem.  There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access.  At least now only the craziest DSL providers still use those modems.

Maybe you are looking for

  • My camera in twist s230U after upgrade to win 8.1 show a diagonal cross line

    After windows 8.1 update I am unable to use my camera for skype in my twist S230U and take a snap.It shows a diagonal cross line in the camera image but the camera light shows up,.getting click sound but camera could not take a picture or use video i

  • Macbook "Y" button problem. PLEASE HELP

    Hello all , mY "Y" button will not work unless I hold shift down. I'm not sure whY this is happening and I need advice on how to fix it. AnY ideas???

  • ICloud Outlook 2013 sync errors

    I'm using Win7 64-bit, Office 2013. Group policy was updated on the domain, it redirected My Documents from the local c:\ to the server (2008 R2 domain controller), for easy backup. Most Outlook files are stored in My Documents\Outlook Files, which a

  • Defining Query with SAP Query

    HI All, 1..While creating an SAP Query, I have selected the field groups, then fields, selected basic list, entered the sequence, etc and then also enetered alternate text for control level. When i execute the report, the error message displayed is '

  • Post Installation Errors in loading ORacle R12 on windows vista!!! HElp!!!!

    Hi, I got all errors in the Post installation checks when loading ORacleR12 E business suite on vista. Acutally during installation steps, at step 1 ..at around 30 of 147, the installation stopped quoting an error like unzip file not found or cant be