TS1398 How do you rectify "DNS lookup failed" on an iPad?

I cannot access certain web sites and get the above message.  I have managed to find instructions on how to fix the problem for a Windows based PC but not an iPad.
Can anyone help?  I am not technically minded.  We have a BT home hub wireless router.

Hi makc1!
Here is an article for you that talks about DNS settings and can help you troubleshoot this issue:
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
http://support.apple.com/kb/ts2296
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Similar Messages

  • DNS lookup failed. How to fix with Google chrome?

    "The server at _____.com can't be found, because the DNS lookup failed. This error is often caused by having no connection to the internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing google chrome from accessing the network." 

    Is Safari the same?

  • DNS lookup failing on Macbook with Fios

    Hello all
    I've had Verizon Fios for over a year and had no problems connecting wirelessly to my MacBook.  Out of the blue today, both my MacBook and my brother's began to have issues accessing the internet.  Every attempt would yield the same response:
    This webpage is not available
    The server at google.com can't be found, because the DNS lookup failed. DNS is the web service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network.
    Here are some suggestions:
    Reload this web page later.
    Check your Internet connection. Reboot any routers, modems, or other network devices you may be using.
    Check your DNS settings. Contact your network administrator if you're not sure what this means.
    Try disabling network prediction by following these steps: Go to Wrench menu > Preferences > Under the Hood and deselect "Predict network actions to improve page load performance." If this does not resolve the issue, we recommend selecting this option again for improved performance.
    Try adding Google Chrome as a permitted program in your firewall or antivirus software's settings. If it is already a permitted program, try deleting it from the list of permitted programs and adding it again.
    If you use a proxy server, check your proxy settings or check with your network administrator to make sure the proxy server is working.
    If you don't believe you should be using a proxy server, try the following steps: Go to Applications > System Preferences > Network > Advanced > Proxies and deselect any proxies that have been selected.
    Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.
    I called Verizon for support, and while their reset of my internet has allowed me to connect directly from a ethernet cord from my router, I'm still getting the same result on any attempts to connect via wi-fi.  Since Verizon decided it was a Mac issue and not a Verizon issue at this point, they pointed me in the direction of applecare, but I don't have the money to spend right now on a support call. 
    It seems that the router is connecting to the internet, and I can connect through ethernet, but their is a problem with the wireless communication between my computer and the router.  Any suggestions?

    That is a different issue. Most likely, your university IT has misconfigured their network and only tested it on Windows where little details like TCP/IP subnets aren't even checked. This sounds pretty typical for university IT. Unfortunately, you will have zero luck getting them to fix the problem because they don't support MACS.
    First of all, your question is pretty important and shouldn't be tucked inside a Verizon FiOS thread where no one will see it. I suggest starting a new question so that people looking for this topic in the future can find the answer.
    I am familiar with this problem. It is an IT configuration problem. I just rolled my own hack for it. I should probably try to improve my hack since obviously other people are experiencing the same problem.
    Before I get started. Why are you even looking? What is the exact problem that you are having? My problem was specific to VPNs but your issue seems even more basic than that. What, exactly, does or does not happen to cause you to search for a fix?
    In the Terminal, run the command "scutil list". How many DNS entries are listed? What are they? You should have one that says "State:/Network/Global/DNS". Type "show State:/Network/Global/DNS". What does it return? Are these the DNS servers that you added?
    Let me know the respones to the above and then I can craft a command that will correct and possibly override those servers properly.

  • Post Moved DNS-Lookup-Failed

    Post Moved http://community.bt.com/t5/Other-BB-Queries/DNS-Lookup-Failed/td-p/611636
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Is Safari the same?

  • WSA error DNS lookup failed

    hi,
    When i try to download a file from let say xyz.com i am not able to do so.Policy trace show below result
    User Information
    User Name: r5893
    Group Membership: NBKDOM\r5893, NBKDOM\Limit_Login_Single, NBKDOM\MMS_Access Group, NBKDOM\Screen Saver, NBKDOM\Domain Users, NBKDOM\MMSGroup, NBKDOM\Purchasing&GS-Kuwait, NBKDOM\AllUsers, NBKDOM\Outlook Users, NBKDOM\Administration-Kuwai, NBKDOM\BOUsers, NBKDOM\MYNBKUSERS, NBKDOM\Purchasing Requests - Administration, NBKDOM\EVGROUP001
    User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)
    Custom URL Category: Allow sites
    Policy Match
    Cisco IronPort Data Security policy: None
    Decryption policy: None
    Routing policy: Global Routing Policy
    Identity policy: Users
    Access policy: NBK_Users
    Final Result
    Request blocked
    Details: DNS lookup failed
    Trace session complete

    Hi Asim,
    I would investigate the DNS by establishing an SSH session to the M1 interface.  Do an 'nslookup xyz.com' and see if it resolves.  If it does not resolve, you may want to check your DNS server.
    -Vance

  • DNS lookup failed WRT120N

    Hello,
    I've been having an issue with my internet connection, which has been getting a lot worse over the past 1 month. I purchased the WRT120N about a year and a half ago, and occasionally observed dropped connections, but it was no big deal. Over teh past month or so, however, it seems like I get the "DNS lookup failed" error about every 15-30 minutes. Every time, I have to disconnect and reconnect my computer to my router. In addition, I will be disconnected from XBox Live. This problem may occur every 5 minutes or every few hours.
    I have updated the firmware on the router. I have reset the router, and have reset DNS 1 t0 8.8.8.8 and DNS 2 to 8.8.4.4. THe network is configured as a DHCP. The X-Box has a wired connection, and my laptop experiences this problem whether I use a wired connection or a wireless one.
    I've reached the end of my very limited technology skills, so if anyone has a solution, I'd be more than greatful.
    Thank you!

    To isolate the concern, connect your computer to the modem and observe the connection for a day or a period of time. If the connection is dropping through the modem, contact your ISP. However, if it is stable through the modem, you can adjust the MTU settings of the router. Set the MTU to 1350. Also, reconfigure the wireless settings. Set the channel width to 20 MHz only and select a specific wireless channel. I suggest using 1, 6 or 11.
    Another thing you need to consider is the location of the router. It shouldn’t be too close to your modem as it may create interference. It should be on a higher and open location.

  • Local site blocked - DNS lookup failed

                      Hitting our webpage from the inside is blocked; the policy trace shows Request blocked: Details: DNS Lookup fails
    the local webpage is in the Custom URL Catagory- Allow group...
    This fails when leaving the www off the front.   www.site.com works but site.com fails...
    .site.com and site.com are in the custom URL catagory in an 'allow' group
    this is also in the bypass filter

    A large amount of sites in the world are unable to resolve domains that do not have www in the front. The easiest example is NASA.  Go to nasa.gov and it does not work.  www.nasa.gov does work.  This is due to the admins configuration.  However like chris mentioned I would confirm that your DNS is opperating correctly.
    P.S.  The nasa test might or might not work.  Some browsers automatically change the nasa.gov to www.nasa.gov
    Christian Rahl
    Customer Support Engineer
    Cisco Web Content Security Appliance
    Cisco Technical Assistance Center RTP

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • I was downloading a movie on my iPad and I stopped downloading it and I want to delete it and it won't. How do you delete it in the iTunes for iPad

    I was downloading a movie on my iPad and I stopped downloading it and I want to delete it and it won't. How do you delete it in the iTunes for iPad.

    If you tap and hold down the icon - and the X does not appear on the icon - you will not be able to delete it without totally downloading it. Finish the download and then delete it.

  • How do you transfer Pages files from Mac to ipad?

    How do you transfer Pages documents from Mac to Ipad?

    If you have iOS 5 on the iPad and enabled iCloud in Pages, you can go on your Mac and go to http://icloud.com, then click iWork, then click the gear icon and upload the document. It should appear on your iPad.
    If you have an older OS on the iPad, you will need to plug in to the Mac and launch iTunes. Click on the iPad under DEVICES. Then click on the Apps tab up top. Scroll down until you see a File Sharing section. Click on Pages, then click on the "Add" button.

  • How do you restore to last icloud backup on ipad. Trying to retrieve deleted minecraft world (not a deleted app, just the progress on the game) from my last icloud backup.

    How do you restroe to last icloud backup on ipad? Trying to retrieve deleted minecraft world (did not dletete app, only the progress on the game) from last icloud backup.

    Restore from iCloud Backup
    1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Enable Location Service
    9. Select network, enter password and join network
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Selected Restore from iCloud Backup
    12. You'll be required to enter Apple ID and Password
    13. Agree to Terms and Conditions
    14. Select Backup file
    15. You'll see progress bar
    16. Red slider will appear; slide to unlock; step #1 to #16 is fast
    17. Pre-installed apps will be restored first
    18. Message: Purchased apps and media will now be automatically downloaded
    19. You'll see a pageful of apps with Waiting/Loading/Installing
    20. When the restore process is complete, your device will restart. You should connect the device to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on).

  • How do you create a new mailbox folder on iPad?

    How do you create a new mailbox folder on iPad?
    step by step directions appreciated.
    Thanks for the help.

    THank you for this very prompt response.

  • How do you make photo books in iphoto on ipad?

    How do you make photo books in iphoto on ipad?

    Try here:
    http://help.apple.com/iphoto/ipad/1.0.1/

  • How do you create new maps in Mail on iPad?

    How do you create new maps in Mail on iPad?
    In the iPad-manual they mention you can put messages in other mailboxes or maps (to free up the Inbox).
    But they don't mention how to create such maps.
    In the app itself I can't find a way to do it.
    thanks for all replies
    Kamiel

    Maybe you are confused by the fact I used the word 'maps' instead of 'folders' (my natural Ianguage is Dutch).
    For your question about the manual: on page 59 in the 'iPad 2 user guide' under 'organizing Email' they say you can move messages to a different mailbox or folder.

  • How do you get Groups to work on the IPAD? They imported and show in Address Book but when used, only the first address picks up.

    How do you get Groups to work on the IPAD. They show in address book but only the first name is used when entering.

    When you select the bookmark on the upper left, you should be able to see multiple groups.
    For the groups page, select the bookmark on the upper right to see the individual entries.

Maybe you are looking for

  • How can you get 2 videos to play simutenously together?

    How can you get 2 videos to play simutenously together so both are playing side by side on screen at the same time? 

  • I can't install itunes for windows get error message 5

    i can't install itunes for windows get error message 5

  • Insert into NVARCHAR2 columns(ORA_01461, ORA-01026)

    Hi, Oracle8i Client 8.1.5 (OCI8) Oracle9i Client 9.0.1 (OCI9) Oracle8i/9i DB I want to insert strings into a table with two NVARCHAR2 columns with OCI. NLS_NCHAR_CHARACTERSET is UTF8 (DB). The provided String is encoded in Windows-1252. The supplied

  • Drag and Drop and ListCellRenderer

    Greetings, I have some newbie questions about getting drag and drop working with ListCellRenderer. I'm using 1.4.2. I have a JList using ListCellRenderer, and want to be able to copy the cells to native applications. (I don't care about dragging anyt

  • Open in does not appear

    I just downloaded the reader app and tried to put an email in the reader. When I tapped on the appropriate icon the open in did not appear on the list in the window that opened. What do I do?