TS1398 I can't get the authentication page to load to input a username for wifi network

I can't get the authorization page to upload so I can enter wifi network username & password

Whenever I log into icloud.com
Using what version of which browser?
iCloud.com requires Safari 6 or later, Firefox 22 or later, or Google Chrome 28 or later. Have you tried all of those?
If you have, have you tried clearing your browser cache and cookies?
For the first tine since 1989 I'm thinking about buying a PC.
You'd have exactly the same problems on an 8 year old PC too. It's a bit unreasonable to expect such an old Mac to continue to be compatible as software is constantly updated.
Saying that, I'm still able to access iCloud.com successfully in Safari v5.0.6 on a PowerPC Mac running Mac OS X 10.5.8, so the problem you're having is likely to be a browser issue, not something inherently wrong with the computer.
Since all this crap started, Mail won't download my Mac.com or me.com email.
The iCloud.com website is totally unconnected to Mail's ability to download email via IMAP. Have you checked the mail server settings are correctly setup and up-to-date?

Similar Messages

  • I can't get the settings page to load properly

    I type the I.P. in and it only loads a few items. What is the deal?

    To view the router's web pages:
    Use Internet Explorer, it usually works.
    JavaScript must be enabled.
    Use a computer that is wired to the router.
    In the non-working computer, temporarily turn off your software firewall.
    If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
    If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
    If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
    A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
    If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
    If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.

  • When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

    When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    '''For Firefox versions previous to 29.0:'''
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox"[[Image:Button reset]] button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    '''For Firefox 29.0 and above:'''
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • I am using windows 7 and can't get the print drives to load for F2210 printer

    I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

    Hello @Imvertical 
    Welcome to the forums!
    I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try. 
    To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
    Next:
    Perform a Level 3 uninstall.
    There are 2 ways you can run the uninstall:
    From Original installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Click Start and open 'Computer', and then right click on the CD drive and open
    3. Open folder Util
    4. Open folder CCC
    5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
    10. Run the download to reinstall the printer
    If software was downloaded and extracted to your system:
    1. Click Start and type %temp% in the run field
    2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
    3. Open folder Util
    4. Open folder CCC
    5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
    10. Run the download to reinstall the printer
    Please let me know if the installation worked after the Level 3 uninstall.
    Good luck and have a nice Wednesday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Every time I start Firefox, the upgrade/signup page is displayed in one tabe while google, my start;up page s displayed in another. How can I stop the firefox page from loading every time?

    Every time I start Firefox, the upgrade/signup page is displayed in one tab while google, my start-up page is displayed in another. How can I stop the firefox page from loading every time?

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • HT204053 Why can'T I get the store to work. I have tried the search and nothing happens. I want to buy more spongs and can only get the home page to show the music

    I have been trying to get an album of George Jones to load to my Ipad i can't get the store to let me search ? What am O doing wrong

    (for an example of what I mean, my site: http://www.katesilsby.com (retouch page) and what old iweb did and what I want to happen: http://web.mac.com/vogier/iWeb/vivian%20ogier/wardrobe.html
    iWeb2 photos page is completely different from that of iWeb1.
    iWeb2 photos page can be retro back to iWeb1, but not without major javascript coding.
    or using completely different previewing method for larger image, example: http://hdl.50webs.com/Lytebox/Photos.html

  • I Can't get the motion page to play at the beginning of the movie, it old shows up at the end of the movie, Help!!

    Does someone know how to get the motion page in I-dvd to play at the beginning of the movie instead of at the end, which is what is happening with my situation??

    Are you referring to the motion menu?  Check to see if you have the project set to autoplay when you insert the disk in a player.  That would bypass the menu and would drop you back into the menu at the end of the show.
    OT

  • HT201272 I purchased some music on my iPod touch and want to download them to my iPad mini also but I can't get the purchased section to load at all anyone else had this problem?

    Ok so I have an iPod touch 4th gen and I purchased some music on it. I also have an iPad mini and wanted to download it onto there also. Problem is that no matter how many times I try I can't get my purchased music section to load. I get the big at the top where you can select all or not on this iPad and the alphabet down the left hand side and the little loading thingy appears but nothing ever actually loads no matter how long I wait. It also sometimes just crashes the whole thing and kicks me out the app. Any suggestions? I've tried turning device on and off, it has the latest software iOS 7 and I've tried resetting all the settings already also as well as logging in and out of my Apple ID.

    Hello AstarteLydianna,
    The following article provides some additional troubleshooting steps that can help get the App Store working on your iPod Touch.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • I hit Reset and lost everything.  I have the apple and a line under it.  How can I get the Home Page back?

    How can I get back to the Home Page?  I hit reset and lost everything.  I have a dark screen with the white apple and a line under it. 

    Wait until it finishes restoring. It would be a good idea to connect it to the charger so it won't run out of power during this process.

  • Can't get the new pages to open on iMac running parallels

    I have downloaded new version of Pages but when I go to launchpad and try to open the icon appears for a second and then nothing happens. Same with Presentation and Numbers. The old versions seem to work - any help? I am running  Mavericks and am testing out Parallels but am losing patience.

    i have been posting this a few places maybe it will get around.  I have found becuse of my full enclosed iphone case i can not get my figure low enough to get the control panal to work.  maybe apple can move up the control panal access to get it to work better for thos who have full cases.

  • How can I get the 'recent pages' feature back in the navigation toolbar Firefox 4.x?

    I use Firefox 3.6.17, Dutch version. At home i've updated to firefox 4. But I miss in this version one of the nicest features (i think): In the navigation toolbar on the left side (in version 3.x), you can browse back and forward and also there is a small arrow that shows the pages that you have visited (I don’t know the name in English, but in Dutch it is called recente pagina’s, literally translated recent pages). In version 4.x this little arrow has disappeared.
    How can I get it back in version 4.x?

    Click-hold the unified Back / Forward button, or right-click it to get the Back / Forward history for that tab.
    Or install this extension to get the old "drop-marker" button restored. <br />
    https://addons.mozilla.org/en-US/firefox/addon/backforedrop/

  • How can I get the third page to show?

    I have a track with 3 regions and the last one won't show up in the score editor even though all 3 regions are selected. I believe I must leave the 3 regions unmerged because of some triplets that are misrepresented if I merge them with the rest which is in 4/4.
    https://skitch.com/john-davidmings/ra8fy/saintsaens
    You can see that under the first two pages the third[ in Page view] is not showing up. The very short region in between the 2 larger ones are the triplets that can't be merged.
    Any ideas?
    Message was edited by: 55plus

    Thanks, but this does not work. It only sums the quantities of the individual page.
    I want the total of all quantities from the all pages of the report to show on every single page.
    Using the example I originally provided, your solution only summed each individual page, so all three pages showed a different number. I swapped out PageSum() with ReportSum() and it gave me the same incorrect results I described in my example.
    Using the example above, all pages should read '385' as the total quantity. It should be like the 'Document total' (which I know is a system variable) that shows the same on all pages of a report.

  • How can i get the authenticity of facebook to change

    so im using a public wifi connection. when i try to go to facebook it says : SECURE CONNECTION FAILED: The connection to the server was reset while the page was loading.
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.
    HOW DO I FIX THIS!?!?

    Apologies for the seemingly arcane nature of this suggestion, but could you see whether there is more detailed information about this problem in the Browser Console? Here's how:
    * Open the Browser Console using Ctrl+Shift+j or the Developer menu
    * Once the console settles down, click the Clear button on the top bar
    * Leaving the console window open, switch back over to Facebook and reload (Ctrl+r
    * Switch back over to the console and look for security-related messages. These might have a red triangle at the left. Please copy/paste the messages into a reply.

  • I can't get the web page email link to work.

    When I click on the envelope icon to email a link to the web page I am presently on, nothing happens.

    Hey windows 8.1,
    Please install Microsoft Office 2007 or higher and configure the option Microsoft Outlook 2007 as default email reader. It will work. If still not work please do the following:
    Hello <!-- XXX you may wish to edit this greeting, and other parts of the response so that it is personalised to the question asked.--> ,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b>Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Please report back to say if this helped you!
    Thank you.

  • I received a update yesterday and from then on I can't get the "home" page of Firefox, just a mostly blank sheet with "done" at the bottom??

    Nothing else will load when I'm on Firefox, Yahoo nothing just the white page.

    did that solve the issue? i still believe it has more likely to do something with faulty cache (maybe the restart of the browser really triggered it );
    if it was an issue with dns prefetching it would be rather strage since you already were on the domain instructables.com & wouldn't have had to resolve the domain for the subsites again. and since the server, your isp or your local hardware might not support ipv6 fully yet, it can always cause some glitches too...

Maybe you are looking for

  • Can I disable image previews in Acrobat 9 Pro Organizer?

    I need to do something to speed up loading and scrolling through large collections in Organizer.  Great tool but desperately slow!!  Any suggestions?

  • Debugger wont trace source.

    What the!? The Flex environment is great. Debugs well. I especially like the "Expressions" watcher. However, if I place my script code into files then the debugger ignores every break point in those files. For example, if I have a component and use t

  • HP w17e Monitor-Camera?

    I have a HP w17e monitor attached to a Mac-Mini (mid 2007version). Mac Mini is running OSX 10.6.8. Was a little frustrated Sunday during a web chat (i-Chat) with a relative. I could see him,but he couldn't see me. Does this monitor have a camera? If

  • Failed PO Release Procedure

    We added new set of release strategies to existing ones (SAP 4.. Since some of added release strategies no longer required,  the team deleted it. The characteristic used for the class are: 1.  PO Document TYpe 2.  PO Purchasing Group 3. PO Purchasing

  • Need to copy reports from Crystal Enterprise 9 to Crystal Enterprise 11

    Please let me know to use the same crystal report 9 repository database for reports in crystal report XI version? We are having more than 700 reports in CE 9. As per my understanding, CE 9 stores the reports in APS_InfoObjects2 table and CE11 stores