TS1398 I cant get the phone to joing my wireless network   any suggestions?

Suggestions?

Maybe try settngs - general - reset - reset network settings. Is anything recognized? Did you have a connection before? Go to settings - wi-fi - press the arrow on the network and select 'forget this network'. then try to reconnect. Turn off your router then turn back on.

Similar Messages

  • I cant get the phone to turn back on

    i just tried a phone reset by holding home and power button for ten seconds or so and now i cant get the phone turned back on. can anybody help

    Try the troubleshooting help here.  http://www.apple.com/support/iphone/assistant/phone/
    You may need to restore your iPhone.
    If it won't restore, try here. http://support.apple.com/kb/ht1808
    If nothing helps, you need to contact Verizon for information for an exchange or refund. This is a user to user forum, not Apple.
    Apple's policy for a refund or exchange is within 14 days of purchase. Verizon's policy may be different.
    Definitely try restoring .. hopefully you won't have to go through the hassle of an exchange.

  • HT1688 i have an i phone 4s. i have tried everything i know to do but cant get the phone to ring out loud when i recieve a call or message. any ideas on how to fix this?

    I have an i phone 4s I have tried everything i know to do, but cant get the phone to ring out loud when i recieve a call or message. Any ideas on how to fix this?

    Flip the ring/silent switch on the left side of the phone from silent (red showing) to ring position.

  • HT202157 just started a new apple tv and also started using an iMac . I have itunes on the iMac but i cant get the apple tv to sync or find any settings to do so !

    just started a new apple tv and also started using an iMac . I have itunes on the iMac but i cant get the apple tv to sync or find any settings to do so ! How can I get the iMac and apple tv to sync the itunes ? i have a internet connection between them , I have signed in to the itunes store on the apple tv and it shows that the apple tv is sharing my library from the IMac , but it wont sync and the apple tv has no content !

    Welcome to the Apple Community.
    The Apple TV (with the exception of the Apple TV 1) does not sync, it streams everything from your library on your computer or from the internet.

  • Switching from Iphone 4 to Android, now i cant get txts from other Iphone users... any suggestions?

    switching from Iphone 4 to Android, now i cant get txts from other Iphone users... any suggestions?

    http://support.apple.com/kb/TS5185

  • Cant remember my passcode and cant get the phone to sync to itunes

    I cant remember the passcode to my iphone 4s and I can't get it to sync to iTunes to reset it either

    Hey nickynackynoonoo,
    Thanks for the question. The following resource provides troubleshooting information if you are having issues with your passcode:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the Connect to iTunes screen.
    5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Thanks,
    Matt M.

  • After an unsuccessful itunes update i now get an "msvcr80.dll file is missing on my computer message.  I tried reinstalling it for the microsoft site and it says it was successful but i still get the error message when i reboot.  Any suggestions?  Thanks

    After an unsuccessful Itunes update I started getting a "msvcr80.dll file is missing from your computer" message.  I downloaded and installed the Microsoft Visual C++ file and it said the reinstallation was successful but I still get the same error message and Itunes won"t install or run.  Any suggestions?  Thanks

    Hey colorado65,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so are particularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • I've updated my Backflip (Motorola) to the 2.1 software build (non-Motorola) but still can't get the Fennic-2 build to install. Any suggestions?

    I can't get the Fennic-2 build of Firefox installed on my Backflip (Motorola). I've updated my software to Android 2.1, beta 3 (build of j_r0dd). Any suggestions/

    Sorry, Firefox 4 beta is not compatible with the Motorola Backflip.
    For more details, and experimental (unoptimized) nightly build that might work with the Backflip, see:
    https://wiki.mozilla.org/Mobile/Platforms/Android

  • I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Any suggestions?

    I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Also most of the time, the SMS are not sent nor received...
    The phone was checked by my carrier (phone company, Movistar) and they replaced the micro SIM card. bear in mind that there's no Apple shop here and the Iphone 4S is NOT available in Argentina!!!
    Any suggestions?

    Dear all,
    (THIS CONCERNS MTC TOUCH CUSTOMERS IN LEBANON)
    I've received an email with a solution to the problem; you have to update to the new iOS 5.0.1 firmware (9A406)!! It's been 1Hour and so far my iPHone 4S is working just fine. Please follow carefully the below instructions:
    RUN A FULL BACK UP BEFORE DOING ANY OF THIS
    1. Download the new iOS 5.0.1 firmware (9A406) from the internet. (800MB)
    2. Connect your iPhone 4S to iTunes.
    3. Once connected, two options will show: ‘restore’ and ‘check for update’.
    4. Press down SHIFT and choose ‘check for update’. (if you click ‘check for update’ without pressing down SHIFT doesn’t work.)
    5. Select the new firmware (9A406). Note that the file should be renamed ‘iPhone4,1_5.0.1_9A406_Restore.ipsw’  (instead of ‘iPhone4,1_5.0.1_9A406_Restore.zip’), i.e. changing the file extension from ZIP to IPSW. iTunes will now work alone and update your iPhone 4S.
    A full back up is recommended before firmware upgrade.
    HOPE THIS HELPS

  • My touch screen is not working at all and I've tried numerous times to turn it off and on but with no success to getting the touch screen to work again.  Any suggestions to get it back working?

    My touch scree will not work at all.  It just stopped one day and has not worked since.  I've tried numerous times to restart it but with no success at all.  The only tning I haven't tried is resetting it back to it's original setting when I bought it 2 years ago>  Any suggestions??

    When resetting the iPod to factory defaults/new iPod fails to resolve a problem, the problem is likely due to a a hardware problem. An appointment at the Genius Bar of an Apple store is then in order.

  • I have an Iphone 4S on ios7.0.3 and am attempting to use airplay with an airplay enabled AV receiver from Pioneer (VSX-53). I also recently upgraded my wireless router. I no longer get the airplay icon on my iphone? Any suggestions?

    I have an iphone 4S on ios 7.0.3 and am attempting to use airplay with an airplay enabled AV receiver (Pioneer VSX-53). I also recently upgraded my wireless router and the roouter is working fine with the five elements on the network. Prior to the upgrade to 7.0.3 and the router upgrade the airplay feature working fine and i was able to consistently use airplay to stream music th the AV receiver. After the upgrades the airplay icon no longer appears on my iphone or on my macbook running itunes. Any suggestion on how to trouble shoot the missing airplay icon is much appreciated.

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • I cant get the phone to connect to my computer

    hi my phone wont connect to the computer, i tried two different cables aswell, its not coming up in itunes and wont charge, any help would be great

    Do you have the PB G4 in your signature? Are you running at least 10.4.11 and iTunes 8.2? Those are the minimum requirements.
    If so, try reinstalling iTunes. If that doesn't work, remove and reinstall AMDS:
    http://support.apple.com/kb/HT1747

  • We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

    Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

    Refresh all your devices before reconfiguring printer to connect to your computer.
    a Shutdown computer
    b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
    c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
    d Once router is ready , put back brick at the back of the printer to turn it on
    e Wait one minute
    f Turn on computer
    Repair your disk permission: http://bit.ly/OeD7U3
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website http://bit.ly/ToA1fo
    Run firmware update http://bit.ly/AcNqbg

  • Cant see the image but I can hear it, any suggestions?

    I have just uploaded the new version of QT and try to play a 1280x720 Mov in it but the image is not there while I can hear the sounds.
    I tryed playing a 4:3 dv mov and it was fine, any help would be great.
    Alex

    I have same problem as Alex, I also have latest version of QT with no pictures but can hear sound.
    The video guy that transfered the DV tapes for me can play the HD clips from the tape in QT and iMovie (both older versions than mine).
    Kenedy, I have the Movie Inspector up, now how do I search for the codec?
    Being a still photographer this language is pretty foreign to me. Any help appreciated.
    Thanks in advance.
    GHP

  • HT5503 I cant get ios6 to download onto my ipad2. Any suggestions?

    Any help would be appreciated.
    Thanks,
    Willlouis.

    Found a solution.  On my MacBook Pro, I went into iTunes to make sure the current version of iTunes (10.7) was loaded,  Then I had to connect my iPad 2 to my MacBook; in iTunes, my iPad showed up in the left column.
    Then I checked for updates and iOS 6 showed up; i updated my iPad 2 via my MacBook.  Also, the Apps that showed a status of "waiting" also updated.
    The Universe is whole again. 

Maybe you are looking for

  • CASE IF Statement in OBIEE Analytics

    Hi, Here is my requirement, i have two columns from two different subject areas: 1) Available Quantity from Inventory Balances Subject Area 2) Net Invoiced Quantity from Sales - Orders, Backlog, Invoices subject area. Now i have to create a report an

  • How to get a collection of beans using web services

    Hi, I'm new to SOAP and Web Services I'd like to know whether the following is possible or not. I've created an EJB with this business interface: public interface Users implements EJBObject { public User[] getUsers( ) ... Where the User object is a b

  • Java.lang.UnsatisfiedLinkError: t2cGetCharSet Error in ODI

    Hi Experts, I am trying to create Oracle Data Server . The source is Oracle E-Business Suite R12. When i click on test connection i get an error message "java.lang.UnsatisfiedLinkError: t2cGetCharSet". Any idea why such error. Thanks and Regards, And

  • CS2 on OS 10.5: Can't save as GIF, PNG, ... ?

    I'm running CS2 on 10.5 and the ability to save an 8-bit file as a GIF or PNG or "Save to the Web" is not possible. I must be missing the obvious, but I have tried opening and saving different files but they all have same issue. What I can save as is

  • Is there a way to get out of recovery mode without restoring my iphone

    I was trying to update to ios 7 beta 5 and my iphone seemed to be updating it was about 3/4 the way and then it crashed and sent me into an endless recovery mode loop. i tried rebooting it a couple times but it does work. is there a way for me to get