TS1398 imac connects to internet for a few mins then stops and cannot find any wifi network-other devices are connecting without problems
My imac has suddenly stopped connecting to the internet through my wifi network if I restart the machine it finds the network for a minute or 2 and then stops working and cant find any wifi networks, other devices are connecting with no problems. Any suggestions please
Try posting in the iMac forum. This is the iPod touch forum.
Similar Messages
-
Tried powering on again after syn. Apple logo appeared for a few seconds then disappeared and now can not turn on. This is a replacement unit, only have had for 4 days
Did you try to connect in recovery mode and restore "as new device", without using the latest backup afterwards? iPhone and iPod touch: Unable to restore and How to back up your data and set up as a new device
-
I am unable to connect to the internet. WiFi, ethernet all working fine. Multiple devices can connect to the internet. Diagnostic on iMac says I'm connected and should be able to access the internet. This is all beyond me. I've changed the location, it appeared to set every thing up. Still doen't work. It must be corrupted so how do I clean it up?
Power Cycle
Power off the router. Unplug it from the wall. Wait for few minutes.
Connect the router back to to the wall.
Power the router back on. Wait until all lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/HT1455 -
Ipod classic connects to Itunes for a few seconds, then disconnects. Cannot sync!
Help! I have followed all guidelines to uninstall Itunes and related software many times in the past two days. I have reinstalled multiple versions (downgrades) - none have worked. I have tried disabling processes, running Windows in safe mode, and running Itunes in safe mode. I have tried reinstalling the driver. All with the same result.
My ipod classic connects to the computer, shows up as a USB drive, and shows up for a few seconds in Itunes. As soon as it shows up in Itunes, the ipod screen says "synchronizing" (I do not have it set to auto-synchronize), then it immediately says "ok to disconnect." At this point, I can click the ipod icon in Itunes, but anything I try to do says the ipod can't be found (because it ejects itself when it's picked up by itunes).
I have tried resetting the ipod (not restoring) and I have tried to connect it under a different user on the same computer with the same result. At first when I reinstalled itunes I kept getting error messages or obvious problems with the install, but I finally got what seems to be a clean install without any error messages of version 12.0.1.26. All the other version 12's gave me ituneshelper64 dll errors. Any earlier versions and I can get my library back in, but it isn't correct.
I have a Sony Vaio running Windows 7 64-bit. I used my ipod many days a week to listen to books and music on the road. Please help!Indeed. I forgot about them. Thanks.
-
My iPod player within my iPhone isn't working properly when playing videos it will start then stop after a few seconds and also the sound bar appears then disappears, and when playing music no sound is coming out when I'm on a call I can hear everything properly and also on loud speaker! What can I do to remedy this? Please help!!!
If you haven't tried it yet, I'd eliminate memory issues first. Close all of the apps with the double tap on the home button method
http://support.apple.com/kb/HT5137
then restart the device.
http://support.apple.com/kb/HT1430
My experience has been that this fixes a lot of issues. -
TS3533 if my imac is left unused for a few mins the screen goes black and is unresponsive
if my imac is left unused for a few mins, the screen goes black and is unresponsive
In addition check your Energy Saver Preferences and make sure that your Display Sleep and Computer Sleep timers are properly set to get the expected results.
For example: I want my Display to sleep after 5 min and my Computer to Never Sleep so that I can choose when to sleep it from the Apple dropdown menu. -
I've seen all the posts for fixing the wifi on the 4s, none of them work! So, who can tell me why my iPhone 4S cannot find any wifi when it used to find wifi, and when it does find a wifi network it can never connect? You think apple would have a clue how to fix it! Because turning the wifi on and off doesn't work, resorting network settings doesn't work, even restoring phone to factory default doesn't work...
Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.
-
My youtube videos are only running for a few seconds, then stop. Is this an issue with my macbook?
My youtube videos are only running for a few seconds, then stop. Is this an issue with my macbook?
Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
http://get.adobe.com/flashplayer/?PID=7105813
Follow the prompts.
Quit Safari.
Restart computer. Relaunch Safari.
2. Enable Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
Press " Manage Website Settings" button for more options.
3. Check whether you are currently in YouTube HTML 5 trial.
http://www.youtube.com/html5
At the bottom left of the page uncheck the box beside
"You are currently in the HTML5 trial".
4. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
5. Turn off Extensions, if any.
Safari > Preferences > Extensions
Now try YouTube.
Best. -
my internet connection is incredibly slow - I know it is not the fault of the modem as other devices are fast. This article was suggested to me as a solution. I think they were just trying to get me off their back. Anyone else experience this?
If Safari is getting very slow:
(Presumably you regularly empty your Safari cache by deleting the following file:
Home/Library/Caches/com.apple.Safari/cache.db
and clear your History)
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home-solutions ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network:please refer to this page: http://www.opendns.com/start/best_practices/#your_network and follow the advice given.
If you use a Router, make sure it has the latest firmware installed.
One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x as is described here:
http://support.apple.com/kb/TS3408?viewlocale=en_US
You can cancel DNS pre-fetching by going to Terminal and typing:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
You have to restart Safari for it to take effect.
If Safari seems to hang for ages:
If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
Open the Terminal from the Utilities folder in /Applications and type
killall -9 WebKitPluginHost
Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The later versions of Flash 10.1 onwards appear to have improved the situation somewhat, but haven't completed eliminated it.
For this and other reasons Apple switched their websites to HTML5 in January 2011:
http://www.appleinsider.com/articles/11/01/26/apple_revamps_its_public_website_u sing_html5.html
For Snow Leopard/Lion users this should also be read:
http://support.apple.com/kb/TS3408 -
My Acrobat suddenly doesn't open. It asks if it can, then I click yes, I see the circle for a few seconds, then nothing. Anyone have any ideas?
I tried removing then redownloading, still the same.
Any help would be appreciated.Hi,
Do you also have any CS6 products installed along with Acrobat XI Pro?
Regards,
Anand -
I cannot connect to iTunes store but all other devices are connecting to wifi and working great in household???
It has been saying this message for weeks so I don't think it's that iTunes is down...thank you though! I have 3 iPads, I phone, and iPod that I cannot connect to iTunes on and am beyond frustrated -ready to return items at this point...
-
After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
switching off wifi and on again or going into airplane mode did't help!
This problem happens only with ad-hoc wifi networks not with normal ones.
(Ad-Hoc network was created on XP Computer)Welcome to Apple Discussions
Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much. -
TS1398 My phone is not able to find any wifi networks.
My phone is not able to find any wifi networks.
I have another i phone and it is connected just fine, my ipad and computers are conneted just fine.
I followed apples directions but still not working.
It stopped working around december 5th.Thats odd unless its a Windows 9x system lol. You shouldn't need drivers for USB storage devices. They are designed to identify themselves as Mass Storage class devices which will run with the built in drivers after Windows 98. Occasionally you will get a device that have deliberately been designed to not meet the standards (for extra features) but you saying this happens with other USB devices says this isn't the case.
Does it only happen with storage devices? Like hard drives, flash drives etc?
The model and windows version shouldn't make much of a difference in this case but it doesn't hurt to know what kind of system you are using.
Look up the USB controller in your system, if there are drivers for that, download them. If it's an already Windows supported device there is no need to download anything for it (have your Windows disc handy if you use XP) then uninstall the USB controller from the Windows Device Manager using the option to remove the drivers as well if the option is there. Restart and let Windows find the USB controller and install it (and any other devices attached to the USB bus). You may find your keyboard, mouse and any other USB devices won't work until Windows has finished installing them. Just give it some time, Windows will get there. -
My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
I can't play youtube videos. I will play for about 12 seconds, then stop, and restart over again. I tried youtube on IE and it works there. What do you suggest I do? edit
This problem can be solved selecting manually the video resolution.
Maybe you are looking for
-
Removing the default (View As Icon) for the control and Indicator
If you remove the default selection View As Icon for all the control and indicator, it is good for the programmer for easy to visualize the Block diagram code.
-
gotta get a new computer from uni, not too sure on the pro or pro with retina. its deffinately going to be a 13 inch but im concerned about overheating ,the removal of the optical drive in the retina plus ive heard stories that mountain lion and the
-
https://social.msdn.microsoft.com/Forums/vstudio/en-US/14e79e9b-9ecd-43ee-8b90-3a56d4702d97/this-code-executes-normally-in-vs2014-despite-the-fact-that-an-inline-member-function-is-not?forum=vclanguage See the post here. I also believe nobody has see
-
Quotation Status Change to "Quotation accepted/Completed" after Order Creat
Hi, My requirement is , i need to change the Quotation Item Status to "Quotation accepted/Completed" once order is created referencing the Quotation. Can you please help me regarding this. Any configuration is there or do i need to use any BADI?. Tha
-
Block plug in..appears on videos~ cannot upload latest version of adobe player on my mac hmm how fix
block plug in..appears on videos~ cannot upload latest version of adobe player on my mac hmm how fix? please...