TS1398 iMessage/Texting Error!
I recently purchased a new IPad (4th Generation). I attempted to send a relative a text via the new IPad, and when I place their name (with phone number) in the send to area, there appeared a Caution/error sign. I tap the sign, and it stated "receivers name<phone number> is not registered with iMessage".
Now I then used my iphone, and sent the same text to the same person, and they received it with no problems. Can I send a text on the IPad without the receiver(s) being registered with iMessage?
JA95606 wrote:
Can I send a text on the IPad without the receiver(s) being registered with iMessage?
Not with the built in software. You'd need to find a third party app to do that.
Similar Messages
-
TS4268 iMessage Activation error
My iPad battery accidently went flat. On restarting I get a iMessage Activation error, rejecting the CORRECT name and password. I have signed out of iTunes and tried again with the same result. How do you reset iMessage activation?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Why can i send imessage texts but not sms texts ?
why can i send imessage texts but not sms texts ?
When i try to send an sms text ..i get a 'not delivered' message...no error code...imessage works fine...Very strange, [email protected] Let's get this figured out. Make sure that SMS messages are turned on. Go to Settings>Messages>Send as SMS. Please let me know if this works.
ChaunceyM_VZW
Follow us on twitter @VZWSupport -
CS5 - Text format for classic text error
will now have to re-edit every part.
Clearly you can get around this by other formats but fact is if you have a document that has negative spacing dont open it in CS5 cause you
This may have been in recent update.
Flash now resets them when you open the file to 0, if you notice or not.
when you have negative (-20) set in spacing, usually used when you have margins.
Classic Text Error
Flash CS5Here's a workaround.
FixTextIndent is a class with static methods that
provides a workaround for the Flash CS5 text formatting
bug. The Flash CS5 IDE will not remember the text
indent setting for either static or dynamic text fields.
We can set the indent in Actionscript for dynamic fields,
so to use this class, convert your fields to dynamic,
then set the left margin.
When you call FixTextIndent methods, they will set
the indent to the negative of the left margin.
Gary Weinfurther, 12/17/2010
package com.keysoft.util
import flash.display.DisplayObject;
import flash.display.DisplayObjectContainer;
import flash.text.TextField;
import flash.text.TextFormat;
public class FixTextIndent
Fixes the line indent of all dynamic text fields
in a given display object container so that
the indent is the negative of their left margin.
public static function FixContainer(container:DisplayObjectContainer):void
for(var i:int = container.numChildren - 1; i >= 0; --i)
var obj:DisplayObject = container.getChildAt(i);
if (obj is TextField)
FixTextField(obj as TextField);
Fixes the line indent of a dynamic text field
to the negative of its left margin
public static function FixTextField(tf:TextField):void
var format:TextFormat = tf.getTextFormat();
if (format.leftMargin != null && format.leftMargin > 0)
format.indent = -(format.leftMargin as Number);
tf.setTextFormat(format); -
database version 11.2.0.4
rac two node
CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
(DESCRIPTION)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('lexer global_lexer language column LANGCODE')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366Like the error message says, you don't have a global_lexer. So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters. Please see the demonstration below, including reproduction of the error and solution.
SCOTT@orcl12c> -- reproduction of problem:
SCOTT@orcl12c> CREATE TABLE actci
2 (description VARCHAR2(60),
3 langcode VARCHAR2(30))
4 /
Table created.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
SCOTT@orcl12c> -- solution:
SCOTT@orcl12c> DROP INDEX actci_ndx3
2 /
Index dropped.
SCOTT@orcl12c> BEGIN
2 CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
3 CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
4 CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
5 END;
6 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
Index created. -
Not receiving group iMessages/texts
First off - i know there have been lots of threads similar to this. I've looked through those and tried the suggestions, but to no avail. I'm still left with the same issue.
I've switched back and forth between my iPhone and Android phones for a couple of years or so and never had any issues with iMessage - until iOS 7.0.3.
Since 7.0.3 i have not been able to receive any iMessages/Texts from friends while in a group chat on my Android device. I can send them and my friends receive them, but i cannot receive from them. I get individual texts/iMessages fine, just not group and only when it's from an iPhone. I am able to receive group messages from Blackberry, Android and Windows devices.
The catch. I gave up on iPhone and officially jumped ship to the Moto X before 7.0.3 was released and i COULD get group texts before 7.0.3.
Here is what has been done. BEFORE switching to the Moto X, i deactivated iMessage on my iPhone AND on both of my iPad's. I made sure to also uncheck the phone number and my email addresses BEFORE deactiviating iMessage. Also did the same with Facetime (not sure if that matters or not).
I have unregistered the iPhone from my Apple profile/support account.
I have deleted all iPhone numbers from my iCloud contacts.
I have tried 4 different Android messaging applications.
I have the correct settings in Android.
I have called Apple and had them remove my phone number from iMessage.
I have made sure that my friends (one is actually my wife so i even did it myself on her phone) have it set to send SMS if iMessage is not available.
I have deleted my contact from my wife's phone, my wife's iPad and my wife's iCloud and then set it up again (as a mobile and not as an iPhone).
I've even called Verizon and Motorola both who believe, as do i, that this is an Apple issue since it only started when my friends installed 7.0.3.
I've ran out of ideas, and ran out of places to go since Apple's support only had the one suggestion which was for them to remove the phone number from iMessage.
I'm open to anything (except going back to iPhone since that would mean i need to splash out on a new phone again). However, i do have an iPhone 4 in my house that i could use if need to TEMPORARILY activate to do something else.I left words out while i was typing in a hurry.
I was saying that the friends of mine who are using the iPhone, have told me that other Android users that they group chat with, are also unable to receive group messages from them.
I think i have been able to narrow the issue down, after spending more time with Apple and with Verizon. Verizon had me text STOP to an Apple Short Code, which resulted in about 40 texts from my wife being delivered via the open group chat that we have with our friends.
To test that this resolved my issue, Verizon initiated a group chat from two test iPhones, which also resulted in success. I was also able to successfully group chat with 6 other groups of friends all with iPhones. I did the same test with a mix of Android and iPhone users too, with success.
Where it failed, was with the original couple. I am still unable to receive group chats from them, while my wife, who is in the same chat, does receive them. I do however, get the texts from my wife in that group chat. Very strange. So i am thinking it is something with their devices and not the fact that i switched from Apple to Android.
The progress today, after a few weeks of frustration is that i can now receive group chats from everybody i would regularly text with (android or iphone users), except this two people, who happen to be the one's i group chat with the most. They are iPhone 4s users on Sprint. -
Keep getting "renderable text" error when I need to OCR PDF's from FrameMaker.
My solution has been to individually extract all those pages, then open them up in Photoshop, flatten them and
widen the canvas size to standard 8.5 x 11.
But that's a little tedious and time-consuming and you have to delete the original page from your document, after
importing the OCR-friendly page.
Is there a printer definition, or something you can set up when you're generating your PDF's in the first place,
that will get rid of that annoying "renderable text" error?Ok...
I don’t know how it happens but after I save my work in FrameMaker or MS Word, and print
to PDF for the final output, there are often pages with text in them that isn’t recognizable,
or that can’t be found with a CTRL+F search.
That is a serious issue, and one we might be able to help you with, but really, quite separate from the issue here. It's too late to try and fix this once it is a PDF.
What is it that’s lost when OCR is run?
Quality. Small file size. Tags (which might be required legally). Almost everything except the basic text, and that might also be lost given that OCR is not guaranteed to work. This is NOT the right way to solve your problem.
The translator doesn’t have any Adobe products except Reader, so I’m limited to Acrobat
to show her how the words and pictures are laid out on a page.
In order for her to copy and paste that text – or search it, to find all of the places where the
same word might be used – I need to make sure every word is there for her to grab.
I have heard of translators trying to work with PDFs, and few that succeed. You can reasonably expect a transation service to support FrameMaker. But if they don't I recommend you extract the text from FrameMaker to a simple Word or text file. They should be fine using the PDF as a visual reference, and having the text to translate, and for you to flow back into the original layout. (Again, something I'd expect a full service translation to do themselves, but there are advantages to keeping control too).
Those were the 2 pages that gave the ‘renderable text’ error. Don’t ask me why or how, they
look like all the other pages in that document. Except Acrobat thinks they’re scanned graphics,
that’s how they present when you wave the cursor around in them, hunting for text.
Renderable text is just text. It means that somewhere on that page there is text. Surely there is layout, page numbers, whatever from FrameMaker on the pages. If not, we really need to look at your production methods - back to the first point. -
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
I get this error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
Here is my code:
import fl.transitions.*;
import fl.transitions.easing.*;
//Assign CLICK listeners for each menu button
Home.addEventListener (MouseEvent.CLICK, buttonClicked);
Big_Square_Baling.addEventListener (MouseEvent.CLICK, buttonClicked);
Wrapping.addEventListener (MouseEvent.CLICK, buttonClicked);
Chopping.addEventListener (MouseEvent.CLICK, buttonClicked);
Tillage.addEventListener (MouseEvent.CLICK, buttonClicked);
Raking.addEventListener (MouseEvent.CLICK, buttonClicked);
//Make the buttons look like buttons
Home.buttonMode = true;
Big_Square_Baling.buttonMode = true;
Wrapping.buttonMode = true;
Chopping.buttonMode = true;
Tillage.buttonMode = true;
Raking.buttonMode = true;
//This loader is used to load the external swf files
var loader:Loader;
//URLRequest stores the path to the file to be loaded
var urlRequest:URLRequest;
//This array holds all the tweens, so they
//don't get garbage collected
var tweens:Array = new Array();
//Stores the current page we are displaying
var currentPage:MovieClip = null;
//Stores the next page that we are going to display
var nextPage:MovieClip = null;
//This function is called when a menu button is clicked
function buttonClicked (e:Event):void {
//Create a new loader instance
loader = new Loader();
//If we clicked the first button, we load the the Home page
if (e.target == Home) {
urlRequest = new URLRequest("Home.swf");
loader.load (urlRequest);
//If we clicked the second button, we load the Big Square Baling page
else if (e.target == Big_Square_Baling) {
urlRequest = new URLRequest("Big_Square_Baling.swf");
loader.load (urlRequest);
//We load the Big Square Bale Wrapping page since we know that the home page or the Big Square Baling page
//is not clicked
else if (e.target == Wrapping) {
urlRequest = new URLRequest("Wrapping.swf");
loader.load (urlRequest);
//We load the Chopping page since we know that the home page, the Big Square Baling page, or the
//Big Square Bale Wrapping page is not clicked
else if (e.target == Chopping) {
urlRequest = new URLRequest("Chopping.swf");
loader.load (urlRequest);
//We load the Tillage page since we know that that the home page, the Big Square Baling page, the
//Big Square Bale Wrapping page, and the Chopping page is not clicked
else if (e.target == Tillage) {
urlRequest = new URLRequest("Tillage.swf");
loader.load (urlRequest);
//We load the Raking page since we know that the home page, the Big Square Baling page, the
//Big Square Bale Wrapping page the Chopping page, and the Tillage page is not clicked
else {
urlRequest = new URLRequest("Raking.swf");
loader.load (urlRequest);
//We want to know when the next page is finished loading
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, fileLoaded);
//This function is called, when we have finished loading a content page
function fileLoaded(e:Event):void {
//The loader contains the page we are going to display.
nextPage = e.target.content;
//Let's animate the current page away from the stage.
//First, we need to make sure there is a current page on the stage.
if(currentPage != null) {
//Tween the current page from left to the right
var tweenX:Tween = new Tween(currentPage, "x", Regular.easeOut,
currentPage.x, 500, 1, true);
//Decrease the alpha to zero
var tweenAlpha:Tween = new Tween(currentPage, "alpha", Regular.easeOut,
1, 0, 1, true);
//Push the tweens into an array
tweens.push(tweenX);
tweens.push(tweenAlpha);
//currentPageGone will be called when the tween is finished
tweenX.addEventListener(TweenEvent.MOTION_FINISH, currentPageGone);
//There is no current page, so we can animate the next
//page to the stage. The animation is done in
//the showNextPage function.
else {
showNextPage();
//This function animates and displayes the next page
function showNextPage():void {
//Tween the next page from left to the center
var tweenX:Tween = new Tween(nextPage, "x", Regular.easeOut,
-200, 0, 1, true);
//Tween the alpha to from 0 to 1
var tweenAlpha:Tween = new Tween(nextPage, "alpha", Regular.easeOut,
0, 1, 1, true);
//Push the tweens into an array
tweens.push(tweenX);
tweens.push(tweenAlpha);
//Add the next page to the stage
addChild(nextPage);
//Next page is now our current page
currentPage = nextPage;
//This function is called when the current page has been animated away
function currentPageGone(e:Event):void {
//Remove the current page completely
removeChild(currentPage);
//Let's show the next page
showNextPage();To help figure out what's wrong, you can use an absolute path to your SWF files. (Such as "C:/Program Files/My Project/MySWF.swf") If the error goes away, then the filename is correct and there is simply some confusion as to where the local path is. Remember that the parent project (your main.swf) should be in the exact same directory as the SWFs being loaded)
~Plystire -
IMessage A error occurred during activation
iMessage an error occurred during activation - when trying to log into imeesage
TThere's a long thread on this forum about your problem but you will have to search for it.
-
Overset text error can't resolve
Hi
I'm in ID CS5, and have an overset text error that I can't get to grips with. It says "Overset text: 1 characters" in the preflight box, and I've got a red box with a + sign at the exit to that page's text box. I've tried grabbing the existing text with the cursor and then using click plus alt, shift, and alt/shift to get whatever's overset to flow into the next page somehow, but nothing appears. The text I flowed to begin with is all there - that is to say the text finishes half a page clear of the end of the text frame and the cursor doesn't want to progress any further down any returns or spaces that are hiding there. Any suggestions as to whether this is a bug, or more likely an obvious point I've missed?
Thanks.Story editor has only hide/show changes option available, and doesn't appear to shed any light. When I pick up the supposedly overset text from the red +sign box on the left hand page and then flow it into the right hand page, I get the blue diagonal flow link line to indicate that the text is flowing, but all that I seem to be creating is an otherwise empty text frame on the right hand page (with an empty blue box at the bottom right to indicate that there's no more overset text), but this leaves me with a blank page for no reason. Aaagh!
-
Bex report displays text Error in the result
Hello,
In my bex query result the text ERROR is displayed beside the value of a keyfigure.
I'm not able to figure why this appears and how to find the error.
Thanks.This is due to the absense of unit/currency against the key figure in the info provider.
Maitain the currency/unit and then run the report. This should rectify the report error.
Naveen.A -
Oracle text error when generating random rows
Hello
firing
SELECT *
FROM
SELECT NAME,EMAIL,ADDRESS1,ADDRESS2,CONTACT_NAME,MOBILE,TELEPHONE FROM MV_CAT_SEG_REG_PROD
WHERE CATSEARCH(CAT_TYPES,'security services*' ,NULL)>0 AND
PLAN_ID=1 AND ACT_STATUS='N'
ORDER BY DBMS_RANDOM.VALUE
where rownum < 4;
returns
ORA-20000: Oracle Text error:
DRG-10849: catsearch does not support functional invocation
DRG-10599: column is not indexed
20000. 00000 - "%s"
*Cause: The stored procedure 'raise_application_error'
was called which causes this error to be generated.
*Action: Correct the problem as described in the error message or contact
the application administrator or DBA for more information.
using oracle 10gr2 on windows server 2003
i have tried 1)dropping the index and creating it again, the index type is "CTXSYS"."CTXCAT"
2) deleting the stats -checking
3)recreating the stats- checking
the table here is a materialized view
i need to tell you people that
there are two indexes cat_types_ind and cat_ids_idx on cat_types and cat_ids columns respectively
the inner query uses cat_types_idx index when executed and seen in sqladvisor
1)removing the order by clause will make the query work but i really want that order by clause
2)the inner-query-only works fine
3) i have seen the forums and they have helped regarding the things i tried above but it does not work
please tell me if i need to further elaborate on anything
thanks in advanceI have same problem, my query is:
SELECT *
FROM
(SELECT
/*+ FIRST_ROWS(50) */
NTQ.*,
ROWNUM RNUM1
FROM
(SELECT
/*+ INDEX(DL_TSD_DEFTR_CI) */
FROM ima_ol.DL_TSD_SITUATION s
WHERE (CATSEARCH(DEF_TRANS,'milano ',NULL)>0)
AND (s.FORECAST = 0)
AND (s.STATE IN (1,0,4))
AND (s.ARCH_STATE = 0)
ORDER BY s.VET_TS DESC
) NTQ
WHERE ROWNUM <=50
WHERE RNUM1 >=1
my oracle and system version:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
"CORE 11.1.0.7.0 Production"
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
I have suggested that to solve the problem I should alter the statistics of the offending table to force to use this index .. how do I do? thanks in advance -
hi all,
i have the Query like this
select NAME from ORG_NAME
where contains(NAME, 'ward&') > 0;
ERROR at line 1:
ORA-29902: error in executing ODCIIndexStart() routine
ORA-20000: Oracle Text error:
While try to execute the Query i got Error ....
if i'm using any spl char inside the Contains function it Throw the Error
IS any way for using spl char in Contains function?Thanks a lot Herald ten Dam!! I was really panicking and was straight away asking our production dbas to raise an SR with oracle. Your answer gave me first clue on what could be happening. I could not find what that transaction was and now when I query the database I dont see any distributed transaction. I mean the following query returns 0 rows:
SELECT * FROM DBA_2PC_PENDING;
Also we are not getting any further report/intimation that the Oracle Text errors are happening. So I am guessing it was some distributed transaction that had happened that caused this issue. I wish I could find what that transaction was - is there any way that can be done?
Thanks a lot!
OrauserN -
Hi
I randomly get following error while searching my database using context index:
ORA-29902: error in executing ODCIIndexStart() routine
ORA-20000: Oracle Text error:
DRG-00100: internal error, arguments : [50935],[drpn.c],[992],[],[]
DRG-00100: internal error, arguments : [50935],[drpnw.c],[600],[],[]
DRG-00100: internal error, arguments : [51002],[drwa.c],[573],[],[]
DRG-00100: internal error, arguments : [51028],[drwaf.c],[795],[204],[AUTOMOBILE]
DRG-00100: internal error, arguments : [50401],[dreb.c],[1037],[],[]
ORA-03113: end-of-file on communication channelIf I search again using the same keywords, it does not return the error.
The frequency of this error is low - around 50 out of around 50,000 searches in a day.
Please advise what should I do?
Regards
MadhupHi,
Version= Oracle 10g Release 10.2.0.1.0
OS= Linux (Redhat 4.0)
Language= English (100% documents that are indexed are in English Language)
similarly the search is in English Language
The contains clause looks like shown below:
(automobile frames in china)*10,
($automobile $frames $in $china)*7,
(NEAR((automobile,frames,in,china)))*4,
(NEAR(($automobile,$frames,$in,$china)))*3,
(automobile% frames% in% china%)*3
) within sec_a
)*1,
(automobile frames in china)*10,
($automobile $frames $in $china)*7,
(NEAR((automobile,frames,in,china)))*4,
(NEAR(($automobile,$frames,$in,$china)))*3,
(automobile% frames% in% china%)*3,
(FUZZY(automobile,,,WEIGHT) FUZZY(frames,,,WEIGHT) FUZZY(in,,,WEIGHT) FUZZY(china,,,WEIGHT))*2
) within sec_b
)*1,
(automobile frames in china)*10,
($automobile $frames $in $china)*7,
(NEAR((automobile,frames,in,china)))*4
) within sec_c
)*1,
(automobile frames in china)*10,
($automobile $frames $in $china)*7,
(NEAR((automobile,frames,in,china)))*4
) within sec_d
)*.1
)I am using a Multi Column Datastore that has 6 columns
each of these 6 columns has been setup as a field section so that I can search within it separately.
My index preferences are as mentioned below:
BEGIN
CTX_DDL.DROP_PREFERENCE('CTXSYS.IIL_LEXER');
CTX_DDL.CREATE_PREFERENCE('CTXSYS.IIL_LEXER','BASIC_LEXER');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_LEXER', 'INDEX_STEMS', 'ENGLISH');
CTX_DDL.DROP_PREFERENCE('CTXSYS.IIL_FUZZY_PREF');
CTX_DDL.CREATE_PREFERENCE('CTXSYS.IIL_FUZZY_PREF', 'BASIC_WORDLIST');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_FUZZY_PREF','FUZZY_MATCH','ENGLISH');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_FUZZY_PREF','FUZZY_SCORE','60');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_FUZZY_PREF','FUZZY_NUMRESULTS','100');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_FUZZY_PREF','SUBSTRING_INDEX','TRUE');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_FUZZY_PREF','PREFIX_INDEX','TRUE');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_FUZZY_PREF','PREFIX_MIN_LENGTH','1');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_FUZZY_PREF','PREFIX_MAX_LENGTH','3');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_FUZZY_PREF','WILDCARD_MAXTERMS','15000');
CTX_DDL.SET_ATTRIBUTE('CTXSYS.IIL_FUZZY_PREF','STEMMER','ENGLISH');
END;Regards
Madhup -
IMessage activation error iOS 8.1
iPad asking for Apple id when trying to open iMessage.........after submitting password, imessage activation error message appears.
Hi chrisfromst. mellons,
If you are having an issue with Messages activation, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Messages
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
Hello, I formatted a 250 GIG drive (with the write zeros option) and it only took about 2 hours. Wow. Thats fast. In the past I used OS 9's "Drive Setup" utility and it used to take much longer. For example, the last time I formatted a drive with OS
-
just updated to the latest version of itunes for windows. i can't stream any of my radio stations and when i try to connect to the itunes store i get an error -3212 message saying i'm not connect to the internet, yet my browser works and my wireless
-
Using my iMac as a main display for a MacBook
I'm thinking about getting myself a MacBook Pro to replace my iMac, which I got in 2008. My question is, would it be possible to keep my current iMac and connect a MacBook to it, so that the screen of the iMac can be used as a main display for the Ma
-
RoboHelp/RoboPDF freezes when trying to generate PDF printed documentation
Hi, I am using RoboHelp HTML X5.0.2 build 801 with Win2k and Word 2000. Whenever I try to generate printed documentation in PDF format RoboHelp freezes and doesn't respond until I kill the program. I also tried first generating the printed documentat
-
Revision: 12972 Revision: 12972 Author: [email protected] Date: 2009-12-15 15:27:40 -0800 (Tue, 15 Dec 2009) Log Message: Commit Catalyst-submitted patch for fixing up unicode path/file names in ActiveX. QE notes: None. Doc notes: None. Bugs: S