TS1398 Ipad2 ios6 wifi is searching but never shows any networks. I have tried it in various places still no joy!!!!

IPad2 ios6 when I try to connect to a wifi network, the iPad is searching for it but never sees anything. I have tried it all over in the last few days with no joy. I have done everything resetting it in iTunes and on the iPad (hard reset) I am beginning to think it must be hardware that's at fault.

It sounds like you disabled the guest network from your AirPort Express using AirPort Utility.....but you did not delete the network from the stored settings on your Mac.
We have no way of knowing what the "various instructions given by other members" might have included, but if you have not already done so on your Mac......
Open System Preferences (gear icon on the dock)
Open Network
Click on Wi-Fi on the left
Click Advanced at the lower right
Here you will see a list of networks that your Mac has joined in the past
Click on the name of the guest network to highlight it
Click the - (minus) button at the bottom of the network list to delete that entry
Do the same if there are other networks that you no longer need
Click OK at the lower right of the window
Click Apply at the lower right of the next window
Close the windows
Open Macintosh HD > Applications > Utilities > KeyChain Access
Locate a listing with the name of the guest network
Click on that listing to highlight it
Click the Delete key on your Mac
Click Delete in the window that appears
Close the windows
Restart your Mac now

Similar Messages

  • My IPhone 4S will not let me join onto a Wi-if network, it will open up and show its loading but never shows any results.

    It shows the loading sign but no matter how long I wait it will never show any networks.
    Also, sometimes the option to turn the Wi-fi on or off will be greyed out.

    Hello there, CH3366dk.
    The following Knowledge Base has some great troubleshooting steps for resolving the issue you are describing:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Additionally this article speaks to the issue with wi-fi being greyed out:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • My ipad2 's wifi is connected but i can't go internet. who can help me

    my ipad2 's wifi is connected but i can't go internet. who can help me

    Check the IP address assigned to your iPad (touch the ">" next to your network name in Settings > WiFi). If it starts with 169 then your router has not assigned a valid LAN IP address to your iPad. It might appear to be connected but you will have no success on the internet.
    Sometimes restarting your router by temporarily (30 seconds) removing/restoring power to it will solve this problem. If it doesn't check that your router has up-to-date manufacturer's firmware and test your iPad on some other networks to see if it works properly there.

  • Trying to sync with desktop (Local PC), searches but never finds connected PC

    trying to sync with desktop (Local PC), searches but never finds connected PC. How to manually sync?

    1. Uninstall your Blackberry Desktop Software
    2. Restart your computer
    3. Install new Blackberry Desktop Software to the different location
    try to run  Blackberry Desktop Software and connect it to your device

  • Attempting to use bluetooth, but my newly replaced 2nd generation iPod touch searches but never detect my wireless headphones which are right beside it. My old iPod had no problem detecting and connecting to the same headphones.

    Attempting to use bluetooth. My newly replaced 2nd generation iPod touch searches but never detect my wireless headphones which are right beside it. My old iPod had no problem detecting and connecting to the same headphones.

    You can try:
    - reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off an then backon your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • TS1398 my ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wif

    My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.

    - Reset the iPod. nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • TS1398 I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.

  • App Store still searching but never load

    i open the apstre to dowload de last xcode but never load any app..

    If you're having problems with the App Store you might try this:
    1 - enable the Debug menu in App Store:
    open the Terminal application.
    copy the command below and paste into the Terminal window:
    defaults write com.apple.appstore ShowDebugMenu -bool true
    followed by Enter.
    launch App Store, login.
    2 - select the Debug ➙ Reset Application option:
    3 - try again.
    OT

  • Why I can not show a Movie from my PC (VAIO Windows Vista 64Bits) to the Apple TV....I am able to see the PC from the Apple TV, but when I click on Show Library, it says " Changing Library from PC Victor Medellin"...but never show it...

    When I go to AppleTV, I select the PC and click on it...It start to open the Library, sending a messege "Charging Library from Victor Medellin"  (the name of my PC) but never show it.   It send a messege " Check the Apple TV is on the same net and iTunes is turned on on PC..:"   but everything its ok.. I have tried with my wife´s PC and there is no Problem...
    If I click play in a Movie and try to select the Output APPLE TV, it still thinking and never send neither the Image nor sound....What i have to check???

    Hi adtsalmon,
    You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
    If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
    If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
    Here's the link to the Movie Rentals FAQs site FYI:
    http://support.apple.com/kb/HT1657
    Hope this helps!
    Cheers,
    GB

  • New Lenovo laptop: Bluetooth enabled but never sees any devices.

    Really nasty one this; Bluetooth working fine under Windows (urgh) but never sees any devices under Linux. No errors at all; it just never sees anything. The device is of this type:
    Bus 001 Device 004: ID 0bda:b728 Realtek Semiconductor Corp.
    It looks like I'm not the only person with this problem:
    http://ubuntuforums.org/showthread.php?t=2242379
    http://www.linuxforums.org/forum/hardwa … icate.html
    I have tried the LTS kernel and get the same problem. I'm not sure what to try to debug it, TBH I can't find out what kernel module is driving it. The radio is definitely detected, powered on and unblocked:
    [root@Lenovo-Z50 ~]# hciconfig
    hci0: Type: BR/EDR Bus: USB
    BD Address: 00:71:CC:19:58:EE ACL MTU: 820:8 SCO MTU: 255:16
    UP RUNNING PSCAN ISCAN INQUIRY
    RX bytes:1614 acl:0 sco:0 events:145 errors:0
    TX bytes:1583 acl:0 sco:0 commands:133 errors:0
    [bluetooth]# show
    Controller 00:71:CC:19:58:EE
    Name: Lenovo-Z50
    Alias: Lenovo-Z50
    Class: 0x0c010c
    Powered: yes
    Discoverable: yes
    Pairable: yes
    UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
    UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
    UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
    UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
    UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
    UUID: Audio Source (0000110a-0000-1000-8000-00805f9b34fb)
    UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
    Modalias: usb:v1D6Bp0246d0517
    Discovering: yes
    [root@Lenovo-Z50 ~]# rfkill list
    0: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
    1: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    2: ideapad_wlan: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    3: ideapad_bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no
    I have another Lenovo laptop running a very similar install of Arch and this works fine. This has a different Bluetooth adaptor though, made by Intel with USB ID 8087:07da. If they're side-by-side I can pair a mouse and a phone to the other one, but nothing at all shows up on the one with the Realtek adaptor. Any help would be very much appreciated!
    EDIT: Just tried this laptop with Ubuntu 14.04 and 12.04.5, didn't work with either. Same problem. Bearing in mind the two threads linked above are unanswered and this clearly hasn't broken recently, I guess this adaptor just doesn't work in Linux (yet). Looks like I'll be returning this one to the store, which is a shame as it took me months to find a 1080p laptop for a reasonable price.
    EDIT: Unnecessary test but Fedora 20 behaves exactly the same. I'm not sure how many current laptops on the market use this chipset, but it looks like a lot of Lenovos do. I have a netbook with a Realtek SD card reader that stopped working in Linux due to some kernel modules being amalgamated, but it works again with the current kernel. I may just sit tight on this one.
    Last edited by Modeler (2014-09-12 08:45:58)

    I had similar issues, downgrading to bluez4 might help, but I found it was much more of a hassle.
    I had the most success using vanilla bluetoothctl commands to pair with the device, then using dbus commands to register the bluetooth device as a network access point or see device capabilities.
    Are you using a network manager? I found NetworkManager was unable to set up the access point due to an error with its dhcp client setup, but connman was able to do it. Or by issuing the right dbus command, I created the network device manually and then ran dhcpcd on it directly.

  • I tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore

    i tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore the phone

    by reset option do you mean the DFU restore? worked for me, have you tried that?
    if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update.

  • My MacBook Pro that is running on 10.6.8 won't update software so that iTunes connects to my iphone 6. Problem is that when I go to update, it restarts the computer but never updates any of the software.

    My MacBook Pro that is running on Mac OS X 10.6.8 won't update software that I need in order to download the newest iTunes software to connect to my iPhone 6. Problem is that when I go to update, it restarts the computer but never updates any of the software.

    In addition to Stedman's spot-on reply --
    When you buy an upgrade disk, all updates in that OS can be found on Software Update.
    For instance, I bought Snow Leopard at 10.6.
    All other updates have been free and downloadable.  So I'm not a 10.6.7.
    10.4 (Tiger) went to 10.4.11.
    10.5 (Leopard) went to 1.5.8
    10.6(Snow Leopard) is currently at 10.6.7.
    Now, when Lion come out (the next major upgrade of OSX), I will have to pay to go to 10.7.
    After that, updates are free til 10.8 comes out.

  • Alert blurs main app but never shows up

    on very very rare occasions i've got a user reporting that a simple modal Alert blurs the main app but never shows up--which more or less blocks the app.
    the Alert is generated by this method:
    // generic message display
    protected function informUser(msg:String,msgTitle:String,msgType:String="normal"):void {
    // user must interact
    var inform:Alert=Alert.show(msg,msgTitle)
    inform.styleName="inform";
    if (msgType=="error")
    informError.play();
    any ideas on what might be causing this?
    thanks.
    attached is what the user's seeing.

    no, there's always text when this Alert is called & it works 99.99% of the time. display list? yes. visible? it's supposed to be but on the blue moon events it's not showing up, main app blurs but the Alert dialogue simply doesn't show up. the client says it's happened twice over the course of several months.
    i can't reproduce this so i can't really debug it.
    thanks.

  • TS1398 My iphone 4 will not show any networks, when there is wifi, what do i do?

    I ordered my iphone 4 from ebay, and t is unlocked. its really new but fror some reason will NOT connect to wifi. it wont even show other networks when there is wifi. any solutions to my problem??

    I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

  • How do I unlock my email?  The grouped email page (I have 3 accounts) shows an item as downloading, but never makes any progress.  I also can't get to Mail, Contacts, etc.  under Settings.

    How do I unlock my email in my iPad?  The grouped email page (I have 3 accounts) shows an item as downloading, but never makes any progress.  I also can't get to Mail, Contacts, etc.  under Settings.  Have reset the device numerous times.

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

Maybe you are looking for