TS1398 ipod touch wifi connection problem

after ipod reset, I can't connect to any wifi.

If this is not your probem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Then:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

Similar Messages

  • TS1398 ipod touch wifi connection problems

    my ipod will not connect to wifi. I go into wifi settings and it says its trying to connect with that little symbol next to the network name, but it wont actually connect. my computer and and laptop will connect but not my ipod. please help.

    Does the iPod connect to other networks?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • PLEASE HELP!!! Ipod Touch Wifi connection problem

    My 1gen Ipod touch has to be directly ontop of my router to even detect/connect to the internet. I have tried all the obvious fixes- Restore, hard restore, resetting the network settings, pretty much everything. If I walk 5 feet away from any router (tried multiple) it drops signal. I cannot find ANY help, and have been searching the web for 2 days litterally. ANY help or suggestions would be much appriciated!!!! Thanks in advance!

    I know you said you tried everything, so forgive me if you've already done these things too. I'm just trying to brainstorm with you.
    Go to "Settings - WiFi" and tap the blue arrow on the right of your WiFi name and choose forget this network.
    Then go to "Settings - General - Reset" and do a "Reset Network".
    Power your router off and then on.
    Have you tried changing the channel your wifi broadcasts on? Perhaps there's a conflict with some other wireless devices such as phones.
    Also be sure you have the latest firmware for your router.
    Can other wireless devices connect to this router? Can your ipod connect in a Starbucks or some other wifi place?
    Hope this helps. Good luck.

  • TS1398 Ipod touch wifi connection

    Hi hope someone here can help me.  I have two ipods for my kids and for some reason one is now not picking up the wifi connection.  It shows it is trying to load it keeping the cirle type signal going but never connects previously it did work.  The other one seems to work fine.  I have tried resetting it, turning it off, and have checked the router which is working fine.  Can anyone else give me a suggestion to try.

    - Does the iPod connect to other networks?
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore the iPod

  • 1st gen iPod touch wifi connection issue, grayed out wifi area in settings

    I have a first generation iPod touch and I'm having difficulty connectiong to wifi.  It tells me there is "no wifi" and the wifi area in settings is grayed out.  I have never encountered this problem in the seven months I've owned this device.  My wifi is currently being used by the other three devices that normally share it with my iPod, and they're running just fine as usual.  I've already tried restoring my iPod, as well as updating my iTunes to the newest possible software, then restarting the computer.  I've looked through all of Apple's troubleshooting guides, to no avail.  Any tips from people who've had the same issue or actually understand technology?  All help is greatly appreciated!

    I have a first generation iPod touch and I'm having difficulty connectiong to wifi.  It tells me there is "no wifi" and the wifi area in settings is grayed out.  I have never encountered this problem in the seven months I've owned this device.  My wifi is currently being used by the other three devices that normally share it with my iPod, and they're running just fine as usual.  I've already tried restoring my iPod, as well as updating my iTunes to the newest possible software, then restarting the computer.  I've looked through all of Apple's troubleshooting guides, to no avail.  Any tips from people who've had the same issue or actually understand technology?  All help is greatly appreciated!

  • Connecting to shared iTunes via iPod Touch wifi connection

    I was wondering if there was a way for me to connect to my shared iTunes music from my iPod Touch (IE in another room, NOT connected to a computer). I would assume that since my iTunes is shared over my wifi connection, and my iPod Touch connects over the same wifi, it would let me do this, but I can't find anything to support this evidence. I'm probably wrong.
    If anyone has an answer, let me know! Thanks.
    -Robby

    This assumes that you use the Ethernet port to connect the iMac to the Internet: 
    Navigate to  menu > System Preferences... > Sharing > Internet section. Switch on Internet Sharing and choose "Sharing your connection from": "Built-in Ethernet". To computers using "Airport".
    To secure the connection (highly recommended) go to  menu > System Preferences... > Sharing > Internet section. Click on "Airport Options..." and check "Enable encryption (using WEP)". Then enter a password twice. You will need to enter this password to share your connection, although you should be aware even 128bit WEP isn't all that secure.
    Additionally OS X IP firewall is probably blocking incoming Port 80 requests (i.e. web traffic).
    Go to  menu > System Preferences... > Sharing > and under Services check "Web Sharing".
    The wording in this post is for Leopard (10.5).
    cheers
    mrtotes

  • Lost iPod touch wifi connection

    I recently set up a wireless network with a laptop and a wired connection with a desktop from the same router. Initially we could connect our iPod touch to the network, now we can't .  Don't know why...using the correct key, passwords etc. Is there something in Network Magic that can help? we aren't able to add a device either!! Please help!!!!!!

    What is the model no of the  Wireless Router...?
    - Try changing the Wireless channel on the router
    - Also Change the SSID to unique name.
    - Make sure that the Mac Filtering is disable on the router.
    Now, check again...

  • IPod touch wifi connects but internet doesnt work

    I have a wireless router that I connect to but when I attempt to get to the internet or app store, it says "cannot connect: invalid argument"
    What should I do?

    When you think you are connected (a checkmark appears next to your network name), tap the blue > next to your network name. Do you have a device IP address, subnet mask, router IP, and DNS IP addresses visible? I think you are probably see just an IP address that starts with 169.x and an incomplete subnet mask.
    If this is what you are seeing, the 169.x IP address is a self-assigned (and non-functional) IP address. You are logged onto your network but your router is not issuing your touch an IP address.
    A few of things you can do (and you can check after each step):
    1. Restart/reboot your router (just remove the power, wait a few, and plug it back in)
    2. Reset your network settings on the touch - tap Settings > General > Reset > Reset Network Settings. After your touch restarts, log back into your network by tapping Settings > WiFi > Other and re-entering your network name, security, and password.
    3. If you are using WEP, either change to WPA2-psk or use your hex key in place of a password
    4. Check to see if your router is using the latest firmware. If it isn't, download and install the latest.

  • IPod touch 5 connecting problems

    My iPod 5 will charge on a wall charger just fine, but when I try to plug it into the computer using a cord, it neither charges or connects to iTunes. I've updated iTunes and restarted my computer and iPod. What do I do?

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • Why has my iPod Touch stopped connecting to my WiFi?

    Why has my iPod Touch stopped connecting to my WiFi?
    It's been fine for the past 2 years but today, it's stopped. It was working this morning...
    According to settings it has connected but I cannot access anything online and the internet icon is missing.
    WiFi is working on my phone & laptop so it doesn't appear to be a problem with the router. Also I've just synced my iPod with iTunes, reset and restarted - still no luck.
    Any suggstions?
    Thanks

    Did you already try to reset the network settings in Settings/General/Reset?
    More tips for Wi-Fi troubleshooting can be found here: iOS: Troubleshooting Wi-Fi networks and connections

  • Why can't I get my iPod touch to connect with my wifi?

    I am unable to get my iPod touch to connect to my wifi even though I've verified the password is correct.   Can anyone help?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Ipod Touch-Wifi and Registry problems

    I just got my Ipod touch a few days ago, and every time I try to go on the internet, I select my network, enter the password, and it says "unable to connect." Also, whenever I hook up my ipod to itunes, it asks me to register the ipod, even though I've done it already.
    Are these problems related? Any advice on how to fix either?
    Thanks!

    I have a similar problem; in XP my iPod Touch SAYS unable to connect but it actually does in Bootcamp XP, however in OSX it will not. Odd thing is, I think my friend's iPod Touch did connect to my MBP in OSX. Oh, I use the MBP to share a wireless internet signal using the Sprint EX720 Expresscard, so sorry if my story seemed confusing. I will get together with my friend later this evening to check this out and determine if there is a defect in my iPod, if hers works. Otherwise at other Wifi hotspots I usually get on without problems.

  • My ipod touch is connected to the wifi but when I get on safari it says "cannot open page because not connected to internet." SOMEONE PLEASE HELP!!!!

    My ipod touch is connected to the wifi but when I get on safari it says "cannot open page because not connected to internet." SOMEONE PLEASE HELP!!!!

    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router.
    - Reset network settings on the iPod: Settings>General>Reset>Reset Network settings
    - The troubleshjooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • My ipod touch displays message "ipod touch disabled,connect to itunes."I have held down on/of switch until apple logo appears on screen of ipod touch , but the problem persists. Any suggestions?

    My ipod touch displays message" ipod touch disabled,connect to itunes. Ipod touch does no connect with i tunes. I hold on/off switch on ipod touch until Apple log appears on the screen, but the problem persists. Any suggestions ?  I am running Itunes 10.6(7)  My Mac OS X Version is 10.5.8.

    I connected ipod touch to my IMAC while holding on/off switch as stated to by anothe community memberand problem is solved. I wasable to update and reatore.  I have been trying to solve the disable problem
    for weeks. althou you did not actually solve the problem, In time you probably would. You were on the right track  Thank you.
    This helped me
    rbrookstone

  • My ipod touch want connect to my wifi

    My ipod touch want connect to my wifi

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • PL/SQL Cursor function

    I want to return all rows where the act_No is less than 3 (act_No's). However I am using row count, but this will allow the first two rows to be printed out and nothing else. The problem is act_No should be accepted whether the values are 1 and 2 or

  • Passing parameters in pl/sql concurrent request

    hi.. i want to add parameters in the code of concurrent programe that we are registering from the back end.. IF p_status = 'CL' THEN*/ v_id := FND_REQUEST.SUBMIT_REQUEST('AR'      ,'XRAXINV_SEL'      ,SYSDATE      ,FALSE      ,'TRX_NUMBER','Yes','' ,

  • First page and path

    hi! i need help... i need to change the first page that is displayed and change the font size on the path (Home...Welcome...)

  • Copy Controls for Deliveries to Billing doc's

    Hi I hope someone can shed some light on this issue i have. I have six deliveries, that i need billing, same plant, same sold to, diff mats, diff del dates. My current routines plit these into 6 invoices, but we want one invoice for he lot, i have ta

  • Installing CS3 on a new computer

    I have bought a new iMac that does not come with a CD drive. I need to install CS3 that is running on my old G4 computer. I have tried copying the applications over on a memory stick but this doesn't work. So how can I install?