TS1398 loaded i06 on ipad3 and now when i connect to internet it tells me no network avalliableso i go back into settings and have to select my network puts a check by it and im good to go until the next time i try to get back online any suggestions thank
Loaded i06 on my ipad3 and when i try to connect to internet gives me a message that a network can't be found. I have to go back into settings and select my network and i'm good to go as long as i stay on iPad it's good. How do i get my netwokk to stay checked so i don't have to keep resetting it? Never had an issue before update.
Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David
Similar Messages
-
I had a hard drive blow out and lost my itunes library. Now when I connect my ipod itunes tells me it is not sync'd. I am not permited to delete or add any songs. I do not want to loose my ipod songs if I reset. Any ideas? Thanks.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
Help? I got a visa giftcard and I had put it on iTunes. Now it's done and has no money in it but every time I try to get a free app it says u have an unsufficient amount. Can any1 help me
You have an outstanding balance in your account. You have to add a payment method to satisfy that balance before you can do anything with the account including purchasing free updates and free apps.
-
When i plug in my iPad2, iPhoto comes on not iTunes. I see iPad in system profiler under USB. I have reset, removed and re-downloaded iTunes. When I download iTunes it works until the next time i plug in the iPad2 and then the same thing all over.
Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
How can I quit (close) Photoshop and keep all windows so that the next time I open Photoshop all the files that I had open are there already in the same position as when I closed Photoshop?
I've been a Fireworks user for over 10 years and just switched to Photoshop. I cannot find a setting that will enable all my file windows to reopen when I quit Photoshop. This is really a problem since I often work on several files at the same time.
Please let me know if the feature exists or point me to where I can post a message for a new feature to be implemented. The feature is a must for any designer working on large projects.
Thanks!There is no such functionality. You could perhaps create a script that stores that info in a custom text file and arranges them accordingly in the workspace, but that's as good as it gets...
Mylenium -
My daughter had an update for itunes which she did. She said that there was also an update for ipod but it had told her it failed. However, now when she connects USB cord it tells her she must restore. I am assuming that it updated to IOS 6. Is she going to lose everything on the device if she goes ahead and restores it? She does not have anything backuped in the cloud as she was not aware that this update would cause this issue.
If her iPod was backed up, she will lose the data on the iPod, but it could be restored from the backup.
-
I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.
If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao. -
I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, starting the vicious cycle again: i need to use the password, it does not get recognized three times, then the system asks me to change it again, and again, and I am stuck!! Is there any fix for this "glitch?
The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.
-
I have firefox 5.0
If just the username is being saved, and not the password, too, it is being saved in Form History. See this: <br />
https://support.mozilla.com/en-US/kb/Form%20autocomplete#w_prevent-firefox-from-storing-form-entries -
Help! I upgraded to 11 and it worked once. Now, when I connect to itunes it tells me that required files are missing and please reinstall. I have reinstalled, I have deleted and reinstalled and the same message appears. Thanks.
Windows XPMeanwhile, I tried someone's suggestion to delete ITunes and Quicktime and reinstall both; still got the same mesage.
-
After I re-click on each white bookmark and get them all rest they are fine until ParetoLogic PC Health Adviser runs a scan again and I hit "Fix All" then the next time I open Mozilla the book mark tabs are white again.
Don't use "Fix All". That program is probably deleting the web site icons from the Firefox bookmarks file. Exclude the Firefox bookmarks file ( places.sqlite ) from the files that are "fixed".
ParetoLogic support is here: <br />
http://techsupport.paretologic.com/plsupport/consumer/search.asp -
Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo). -
I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
Hi I have a year old Macbook pro. I was using a miniport to connect it to the TV via HDM cable. It was working fine but I have used it for a couple of months kept it in a drawer and now it doesnt work. When connected to the TV the screen on the mac goes blue as though there is some signal then back to original screen but the TV doesnt show what's on the laptop. Please any suggestions, thanks??
Hello nothingissecret
Check out the article below for troubleshooting steps to resolve the issue. One would be to try a different cable or adapter to test with the television.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.
I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!
Maybe you are looking for
-
Unable to create a PO in SRM system
During cretion of PO in SRM system we are encountering the following situation: Prior to that we have configured all the initial settings as below: "Defining System landscape" on SRM side,(which updates the table BBP_BACKEND_DEST) we have defined it
-
ITunes Store Rentals and Time Machine
I tried out an iTunes store rental and it worked just fine, downloaded, watched it, and from my music folder on my hard drive it was deleted after 24 hrs. I took a look in Time machine, and the 1.5 GB file is still on my Time machine backup. I tired
-
Lots of Annoyong issues with new MS-6330
Here it is: MS-6330 400 watt PS Athlon XP 1800 256 Kingston Cheap Vid card (not sure what it is, using only to get system up and running) Western Dig HDD DVD player CDRW Problem # 1 Put a new system together a couple of days ago...started with hang a
-
Seriously bugging me and stressing me out - please help me out.
-
Hello everybody: I really need some help. I've modeled and implemented a BPMN process. I'm trying to test it but I got the following error. ORA-12899: value too large for column "DEV1_SOAINFRA"."BPM_AUDIT_QUERY"."AUDIT_LOG" (actual: 2077, maximum: 20