TS1398 My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

Similar Messages

  • TS1398 Can not connect to Wi Fi on my iPad Wi Fi is on and will connect to other devices IPad is searching for network and can not find a network I have reset device and nothing is working help

    Can not connect iPad 2 to wi fi IConnection works on other devices.  This device is searching and can not find Wi Fi to connect too

    It does connect at other Hot Spot locations.  At home and here at my office, I have At&t DSL & Wireless,Motorola 3347 Router.  Computers hook right up to wireless with no problem, I just can't get ipad to connect.  Password is rejected.  Thanks for you quick response, I am not very computer litterate and this is driving me crazy.  Thanks again
    Mike

  • HT4356 I have a cannon mg3120 air printer and it is connected to my wifi but my iPad can not find a printer, what can I do

    I have a cannon mg3120 air printer and it is connected to my wifi but my iPad can not find a printer, what can I do

    1. Reboot iPad
    2. Reboot router

  • HT1695 Ipad will not find wireless networks that it used yesterday, but MacBook Pro still finds and uses these networks.

    Our ipad will not find wireless networks that it used yesterday.   Our Mac Book Pro finds them and uses them.   
    we have reset the cable modem and wireless router, turned off the ipad and turned it back on.   Turned wireless off and back on.
    but it just spins trying to find networks but finds none.
    What do do next?

    Settings for wireless network connections are actually stored in two separate places on your Mac, so in addition to the correct advice offered by Jolly Giant, you will also need to delete old network listings in KeyChain Access.
    Macintosh HD > Applications > Utilities > KeyChain Access
    Locate the name of the wireless network that you want to delete and click it to highlight it
    Click Delete on your keyboard
    It would be a good idea to go ahead and also delete the current connection as well in case it has become corrupted. This will clear out the old settings and when you next connect to the network and enter the password, the new settings will be preserved.

  • I have just updated the i06 software for my ipad and it will not connect to my home wifi network - all my other devices are able to connect - i have tried all troubleshooting options and none have worked - please help

    I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
    I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating me

    you have to set up your router to solve th problem. first find and write down the ipad mac address.
    then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
    i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more.

  • Running FOXFIRE 6.0 on a Windows 7system and when I go to Sync I can not find the option of adding another device. Where is it?

    Trying to sync another computer to sync, but going from Tools to Options to Sync I can not find the Add A Device choice. have looked everywhere but can not find the frame that allows me to enter the codes from the second computer. Have installed the sync function on the first computer and have received a sync key.
    What am I missing and where do I find "Add A Device"?

    Thanks for trying to help solve a problem in Foxfire's sync function. I guess I haven't done a very good job describing the problem so I'll try again.
    My desktop computer is running Windows 7 and Foxfire 6.0. I had no problem establishing a sync account and obtaining the Foxfire Sync Key. Now I would like to sync my Asus Eee Transformer Tablet running Android 3.2 and Foxfire 3 (for Android). On the tablet I go to Sync, then Connect, and get the three-box code to be entered on the desktop computer where the sync account was established. So far, so good.
    I then go back to the desktop computer and in Foxfire click Tools, then Options, then click on the Sync symbol, then click on Set Up Foxfire Sync, which is the only option available. I am then taken to a page with two options: Create A New Account, or Connect. sunce I have already created an account I click on Connect. I then get a page with a three box code and am told to go to the other device (the tablet) and select Add A Device. Unfortunately, on the tablet the only choices available are Sync and connect, which returns a three box code. No where can I find a page or an option fo Add A Device and enter the three box code.
    So, in summary, I can not find w page to Add A Device and enter the three box code on either the desktop computer or the tablet. If all else fails, I guess I can go back to day one and establish a new sync account on the desktop computer, or completely give up on the sync, which is a nice feature but one that doesn't work.

  • HT201359 how can i find out what all the charges on my checking account are for?

    how can i find out what all the charges on my checking account are for?

    If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases - the most recent purchase is above the list. I'm not sure if that shows auto-renewing subscriptions (I don't have any so I can't check).
    If you can't find the charges and you haven't added or changed your card details on your account (when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I have a brother MFC-J835DW printer and my ipad can not find it to print?  They are both connected to the same wirelss network via a Linksys router.  Any ideas?

    I have a Brother MFC-J835DW wireless printer (which is on the list of supported printers for Airprint), and have both the IPad 2 and the printer connected to the same wireless network.  When I try to select the printer to print fromt he iPad, it cannot find the printer.  Any ideas?

    The first thing to do is to make sure that your printer has the latest firmware. You can download the firmware updater from Brother:
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/002700/d lf002793.html?reg=us&c=us&lang=en&prod=mfcj835dw_us&type2=4&os=108&flang=4&dlid= dlf002793

  • TS1398 i can access my wireless network on every other device EXCEPT my new iPad - any thoughts on why?

    any idea about what's going on and why i can't connect my wireless account to the the "new iPad?"

    Yup that would have worked.

  • Ipad can not connect to network

    Can not connect to Internet

    Does the iPad connect to other networks?
    Does the iPad see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPad connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • After losing Wifi connection, can not find a network

    Since IO5 when I loose a wifi connection (out of range or whatever), the phone (4G) will no longer connect. In the Wifi setting, there are no wifi networks listed anymore, none appear, though there are 4 normally.
    Turning off the Wifi and on again does not solve the problem. The only thing that works is turning off the iPhone and then on again.
    Any suggestions??

    Call your network provider.

  • My i-phone 4s can not find a network, it just keeps searching. Have tried all of the advice on apple troubleshooting but still nothing. it is a 4 month old contract phone from virgin. Any ideas please

    unable to get a network

    MMaybe it is defective or your phone isnt registered right. Did you contacted the provider virgin? it uses cdma network.

  • IPhone 5 can not find the network and writes sim card no support

    Hello, I am from Belarus so writing through an interpreter. I bought the iPhone 5 32GB Black from Ebay all good but the problem came when insert SIM card a minute later comes out window that sim card does not support . Connect to iTunes the same. How do I fix this? imei 990002267564852 iPhone 5 32GB Black.

    You can call Apple Care to find out which carrier it's locked to and only they can officially unlock.
    Best you return for a refund and buy one that's not carrier & activation lock.
    Read here for your next purchase: What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
    Check here if it's Activation Lock: https://www.icloud.com/activationlock/

  • IPad can not find 7500a to airprint

    Just installed my new 7500a and I got it to print from my lap top without issues. When I try to print from IPad it says that it "cannot find an air printer" how do I set it up so that I can print wirelessly from my iPad ?

    Hi,
    Firstly please check to see if your printer in the list:
    http://support.apple.com/kb/ht4356
    If YES, you can use this to fix
       http://www.apple.com/support/ipad/assistant/airprint/
    If NO you have to print using inderect way.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • TS1398 my phone can't find my network

    My wi-fi is not connected.  When I type in MY nework, it says "Cannot find Network" ...  help?  I think this is why my siri isn't working ...

    http://support.apple.com/kb/TS1398

Maybe you are looking for

  • How do I download Mozilla Firefox Windows 7 [32 bit] ?

    I need to download this program so that I can do FAFSA application.

  • No response message in Proxy to JDBC synchronous scenario

    Dear Team, I am working on synchronous scenario Sender ABAP proxy <===> SAP PI 7.31 <===> Oracle Database.All the necessary proxy configuration has been successfully tested. Business Scenario: ABAP proxy will send a single Vendor Id to Oracle DB as r

  • Itunes relaunching

    im not too sure how to solve this as im rather new to the mac OS. itunes keeps relaunching a few minutes after i quit the program, is there somewhere to reset the settings to default or 'reinstall' itunes? help much appreciated Powerbook 12"   Mac OS

  • Display image from BLOB field (png image)

    Hello, On my database i have a function which return BLOB (png image from a webservice).. Is there some tutorial or sample code how to display a image froma blob field in oracle reports? thank you

  • Getting error #1034 when using mx:SWFLoader

    I have a requirement where I need to load another swf file into an area in a layout. I have the following mxml:             <mx:Canvas  width="100%" height="200" borderStyle="solid">                 <mx:Label text="This is text in Zone 4 prime "/>