TS1398 My iPad cannot  send mail - the connection to the outgoing server failed

My iPad cannot send mail - the connection to the outgoing server failed.

Go to the email settings, and re-enter your Outgoing Server username and password.
Have you changed that recently, perhaps on the Incoming Server but not on the Outgoing server?

Similar Messages

  • HT4623 On my I Pad I get this message in my email: Cannot get mail.  connection to the server failed.

    I have updated my ipad.  Any ideas on what I can do?
    Trouble:  On my I Pad I get the message:  Cannot get mail.  Connection to the server failed.

    READ OTHER POSTS.  THANK YOU.  IT WAS ONE OF MY EMAIL ACCOUNTS.

  • All of a sudden, I am no longer able to send e-mails (tho I still receive them). the error message says "outgoing server failed" Any ideas?

    All of a sudden, I am no longer able to send e-mails (tho I still receive them). the error message says "outgoing server failed" Any ideas?

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Can you send email from that account on another device?
    - You can try deleing the account from the iPod and reentering the settings.

  • Still cannot send Mail (SMTP connection failed) post update.

    PLEASE HELP!.......Post Maverick (and 10.9.1) I cannot send mail from my macbook pro. The message is "The SMTP connection to server "smtp.o2.co.uk" failed" I have trawled the many discussions about mail issues but most address mail inbox functionality and not sending. I have tried the OS X troubleshooting guide, rebuilt my mailboxes and created new accounts, all without success. All four of my o2 mail accounts are affected. Has anyone managed to resolve this issue? Would appreciate any suggestions

    Ongoing issue for many people ... still not resolved until Apple fixes the SSL authentication in Mavericks:
    https://discussions.apple.com/thread/5470289?start=45&tstart=0

  • IPhone4 when replying or forwarding mail messages i get a message that says Cannot Send Mail address rejected by the server because it does not allow relaying

    When forwarding mail this is what i get
    Cannot Send Mail
    A copy has been placed in your Outbox. The recipent _________________(email address) was rejected by the server because it does not allow relaying.
    Never had this problem before so not sure whats going on. Appreciate any help out there.

    Sounds like there is something wrong with your SMTP server. Try going into Settings>Mail, Contacts, Calendars>select the email account in question, go to the Outgoing server (SMTP) and check the settings. It may be you do not have a username and password in one of the areas. The phone may say optional in a couple, but it is usually mandatory. You can also try a reset on the device, hold the sleep/wake and home buttons together until you see the Apple logo and then release. If neither of these work, then you will need to delete the account, then delete the SMTP server, then add the account back, ensuring you use your username and password everywhere, even when it says optional.

  • TS3276 i cannot send mail in outlook or the mail app; my account is roadrunner.

    I cannot send mail in outlook or on the apple mail app; my account is through roadrunner.  I receive mail no problem.

    Read the threads over in the "More Like This" column over here.----------->
    Have you contacted Roadrunner and Outlook tech support?  If not, why not?

  • TS3276 Mail is not working.  Cannot open new e-mail; cannot send mail.  Connection doctor shows green dot in status column.  I can't delete old e-mails to free up space.

    Mail is not working.  I cannot open new e-mail; and I cannot send mail either.  Also, I cannot delete past e-mails to free up space.  Mailbox seems to hang in general.

    OS X version?

  • I'm getting email but can't send after upgrading to IOS 6 yesterday.The message says cannot send mail and connection failed.  What do I do?

    How can make my phone send mail after upgrading to IOS 6 yesterday?  Receiving but fails to send.

    http://www.apple.com/uk/support/iphone/mail/
    It will be your SMTP settings that need correcting see doc above
    You may have to find out the correct settings from your carrier and or
    broadband supplier

  • IPhone 3G Cannot Send Mail.  The sender address was invalid.

    All of a sudden, I cannot send mail. I get the message "Cannot Send Mail" The sender address was invalid.
    I have reset the phone in hopes of resolving the problem. That did not work.
    The mail that I'm sending to IS a valid address; I'm trying to RESPOND.
    Please help.

    The configuration and use of any outgoing server address (SMTP) may not be supported due to several factors including, but not limited to, the inability for the outgoing server (SMTP) to authenticate users (whether by IP or username/password) that are not directly connected to that Internet Service Providers(ISPs) network.
    This is usually your HOME wi-fi and you are not connected to it because you are on your iPhone away from the house. This is mainly done to prevent unsolicited users from sending SPAM via the ISP's servers.
    An alternative is to use ATT SMTP Server (for US) when you are on the 3G or data network for the carrier and not on your home wi-fi. So enable ATT SMTP server under Other SMTP servers under your Mail's account settings on the iPhone.
    If you are interested you can obtain that information directly from the email provider. This article has a great temple that you can use to ask all necessary information from the provider including "If you use your ISP’s own email service (instead of a third-party such as Gmail), sometimes it may not work if you use another Internet access point, such as a cafe with wireless Internet. Ask your email provider if the settings they give you will work on other networks."
    What to ask if you're having issues sending, receiving, or configuring Mail
    http://support.apple.com/kb/HT1277

  • Mail displaying the message "cannot get mail the connection to the server failed" Help!!!

    Hi
    Overnight both my hotmail accounts on my Iphone 4s, through Mail, have stopped working and I cannot access my email. Every time I try I get the message "Cannot get Mail. Connection to the Server Failed"
    I have rebooted my phone, deleted and readded the accoutns and even reset my network settings to factory seeting but nothing works. A few hours ago it randomly started working again but has since stopped.
    Please Help!!!

    Contact Microsoft to see if Hotmail is having any issues.
    The issue described is not an iPhone or iOS issue.

  • Getting "Cannot Send Mail - One of the Recipient  Addresses was Invalid"

    Mail was working fine under version 1. Upgraded my original iPhone to version 2 and couldn't send emails. Get "CANNOT SEND MAIL. ONE OF THE RECIPIENT ADDRESSES WAS INVALID. OK" message whenever I attempt to respond to an incoming email or when sending a new email. Sometimes "Sending" progress bar goes all the way to the end, but I still get this error message and mail is NOT sent. This is still the case after I upgraded to 2.02 HELP!

    I have since removed the email account and added it again. I tried this several times and came to the realization that the Apple iPhone software was not setting the account up properly. I saved the account even though I was warned by the software that it was not working properly. I then went ahead and carefully edited all the settings and made sure that they matched EXACTLY with those in MS Outlook. I also set Authentication to Password on both incoming at outgoing servers.
    I finally got it working. What a pain!!

  • Cannot send mail - server does not allow relaying

    I keep getting a sporadic error message on my ipad: "cannot send mail. The recipient was rejected by the server because it does not allow relaying". Sometimes it doesn't happen and the mail sends fine. Sometimes I get the error message but the message then sends later. Sometimes it never sends.
    Can anyone help?

    Hi, I've suddenly encountered this problem.  I have a 1st gen iPad.  I've reset, deleted, re-added, turned on both outgoing servers, added my password--this last doesn't stay in the primary outgoing server field; when I go back in, the password field is filled with the (optional) text again and when I 'click' into the authentication box, the password is no longer checked.  However, these are all filled in the secondary outgoing server, so it shouldn't matter.  Restarted the iPad a couple times.  Using system 5.1.1--I think that's as far as I can go.  Any miracles out there?

  • Cannot send mail with mavericks

    Hi I'm using an iMac 2011 27 in. Shawcable is my ISP. I can receive mail. I cannot send mail. I get the error "cannot connect to account myaccount, enter password for user myname" If I go into accounts in mail prefs all smtp accounts show as offline.  I have been over all my settings with shaw they say problem is on my end. They say my computer isn't connecting. Anyone have any ideas?
    jmickey42

    Without in details on what you have tried, I'll throw out some things:
    On the SMTP server settings, use a custom port number instead of using the default ports.
    Make sure you don't have any firewall, net-nanny, or other such network blockers running.
    In Mail, Open Connection Doctor from the Window menu.
    Click Show Detail, then Check Again.
    Note any message noted in the stoplight section, and any related to the account in the details.
    You may want to sanitize any of the messages from the Details so that it doesn't give away an email account or other identifying info.

  • I have somehow lost my outgoing mail servers list and cannot send mail.

    I somehow lost the list of outgoing mail servers and cannot send mail.

    Did you follow the reinstall instructions?
    To reinstall Mail, you must have a system installation disk. Here is the procedure for OS X 10.6, or 10.5.
    1. Insert the Installation disk into the computer.
    2. The disk will appear on the desktop.
    3. Double click on the "Optional Installs" folder.
    4. Double click on the "Optional Installs.mpkg."
    5. Click on (Continue) in Introduction.
    6. Click on (Continue) in Software License Agreement.
    7. Click on (Agree) to agree to the terms of the software license agreement.
    8. Click on the disclosure arrow ▶ next to Applications.
    9. Select (✓) Mail.
    10. Click (Continue).
    11. After Mail has been reinstalled, download and install the Mac OS X 10.6.8 Update Combo v1.1, for Snow Leopard or Mac OS X 10.5.8 Combo Updatefor Leopard to bring Mail up to the most recent version.
    source: https://discussions.apple.com/thread/3679895?start=0&tstart=0

  • I am trying to email pictures from my ipad to my email address on my computer and I have been going along nice but now I get a message that says "cannot send mail the message was rejected by the server"  can't see to figure out why it stopped sending now.

    I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server"  cannot understand why this is happening and have not been able to fix.  Now when I try to send pictues even to another email address I am getting the same message.
    Help.

    Email may not be the best way to move pictures.
    There are lots of ways of moving files.
    A simple and popular way to copy files and share files among your devices.
    https://www.dropbox.com/
    "Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
    https://www.box.com/
    Using iTunes to transfer files:
    http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
    Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares)  protocols"
    https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
    Windows File server
    http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
    "The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance."  " Includes choice of private cloud on-premise."
    http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
    "Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
    http://www.tidal.it/?page_id=309&lang=en
    http://www.msec.it/blog/?page_id=11

Maybe you are looking for

  • Adobe Bridge CS3 2.1 Update and Vista 64 bit

    I updated my CS3 applications using the Adobe Updater. Now when I launch Bridge (either standalone or through one of the other applications in the suite) Windows immediatly reports that Bridge "has stopped working", closes the application and says it

  • The folder path "program files" contains an invalid character

    All of a sudden this morning this phrase shows up when I try to open up my itunes. My daughter was over last night and stuck her small playlist in my library. I do not know if this is the cause but now itunes won't open. I do not know what to do. Any

  • Query runs slowly and times out in CF 8

    I'm trying to run this query using Coldfusion 8 and MySQL 5. If I run the query directly off the database the results are returned very quickly. If I run the query through CF 7, it's pretty slow but still runs. If I run the query through CF 8 it take

  • OPEN ORDER documents need to be closed.

    Hi All, I need to calulate the Open PO documents. The Open PO document older than 6 months needs to be treated as open and if the PO is satisfy the below requirement then it will consider as close.        Deletion indicator set   or         GR Delive

  • V v v urgent pls

    Hi Experts, ITS FOR PHYSICAL INVENTORY. FIRST WE NEED TO CREAE IT IN MI01. THEN WE NEED TO PROCESS IN MI08. IN MIO8 THE FIIRST SCREEN HAS THE PHYSICAL DOCUMENT NO,THEN YEAR. THEN IN THE NEXT SCREEN IT WILL ASK FOR MATERIAL DESCRIPTION FOR THE ARTICLE