TS1398 My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • HT5934 I can't get my ipad mini to update to ios7.0. It keeps giving the message: there was a error in the downloading of the iOS.7. What can I do?

    I keep getting the message: there was an error in downloading the iOS.7. What can I do?

    Try here >  Mac App Store: "An unknown error occurred (100)" when purchasing

  • Is anyone else having this problem: AI CC2014 gives me the message prompt: "An unknown error has occurred" I have opened the same file in AI CC successfully but can't use CC2014 if this keeps happening.

    The file in question was saved in AI CC2014 the night before. I checked all other cc2014 files and they are the same problem.
    Thank goodness they open in AI CC.
    Any help is appreciated.
    On a MBP Latest Mavericks OS.

    YThom,
    This should help to revert to the earlier CC version:
    http://prodesigntools.com/adobe-cc-version-control.html

  • Configure Synchronization Connections An error has occurred while accessing the SQL Server database

    Hi,
    i am getting following error message
    Central Administration --> Synchronization Connections
    An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
    If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
    Central Administration -->  Manage Profile Service: User Profile Service Application --> Manage User Properties
    Error
    An unexpected error has occurred.
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 3bce5a11-f2dc-4788
    Please tell how to fix it.
    iffi

    Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
    for  User profile page not display  number of count in the page first check services , connection , 
    IISRESET /NOFORCE   /  timer services restart 
    Deepesh Yevle MCTS

  • HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Hi Velvalee,
    While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
    Cheers!
    - Ari

  • TS3694 My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not.  The error message indicates an unknown error has occurred, with error code 6.  Does anyone have any idea what the problem might be and how to solve it?  Many than

    My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not.  The error message indicates an unknown error has occurred, with error code 6.  Does anyone have any idea what the problem might be and how to solve it?  Many thanks.

    Hi
    I followed this guy's instructions and it worked:
    http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
    I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
    Cheers for you help.
    Andy
    Message was edited by: bigbadandy

  • I'm not a "Cloud" member.  I just upgraded to Lightroom 6 from Lightroom 5.  All was working well yesterday.  Today Lightroom will not open (Windows 7).  I see the logo photo over my Lightroom platform but nothing loads and I see "Lightroom not responding

    I'm not a "Cloud" member. I just upgraded to Lightroom 6 from Lightroom 5. All was working well yesterday. Today Lightroom will not open (Windows 7). I see the logo photo over my Lightroom platform but nothing loads and I see "Lightroom not responding." I checked the catalogs and see that lrcat-Journal and lrcat-Lock have been created every time I try to open. I have a backup from the first day I upgraded, but Lightroom doesn't want to access it. Should I reinstall?

    Well, is the catalogue (and the folder it is in) writable? Have you actually checked the permissions? Lightroom won't be spitting out the error just to tick you off, and - computer wizard or not - this sounds very much like something you'll have to fix at the OS level: it's probably nothing to do with Lightroom or those funny lads at Adobe.
    Some light reading for you, courtesy of the site search: https://forums.adobe.com/search.jspa?q=%22+not+writable+and+cannot+be+opened%22&place=%2Fp laces%2F1383621&depth=ALL
    It would help to know your OS.

  • Error Message:  Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.

    Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
    Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
    Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
    Does anyone have any idea what may be causing this issue and how to resolve it?
    Thanks in advance for any suggestions.
    By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.

    Not enough information for anyone to even make a guess
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

  • Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
    Regards,
    Nathaniel
    [removed by moderator]

  • Error message "A I/0-error has occured in the file" (free translated from Swedish). What to do?

    Hello!
    I keep getting the error message "A I/O-error has occured in the file" (free translated from Swedish) when I try to save changes to a .ai-file in Illustrator. I have never experienced that before. Does anyone have any idea what the problem is? Greatful for a quick answer, since I can't get any work done =/ Thank you in advance!

    alu,
    If it is a specific file, one thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
    Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
    http://www.recoverytoolbox.com/buy_illustrator.html
    and another similar website,
    http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
    As far as I remember, the former is for Win and the latter for Mac.
    Here are a few pages about struggling with it yourself:
    http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
    http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
    http://kb2.adobe.com/cps/500/cpsid_50032.html
    http://kb2.adobe.com/cps/500/cpsid_50031.html
    http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
    If it is not just a certain file, you may have a look at the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Are you behind a firewall or double NAT??
    What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
    It is plugged in of course isn't it.. no nasty join wireless anywhere??
    The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

  • When i tried to sync my ipod it said "cannot sync. unknown error has occured(-39)

    when i tried to sync my ipod it said "cannot sync. unknown error has occured(-39)"  how do I fix it??

    Are you syncing photos to the ipod? If so, the -39 in this context can sometimes indicate a damaged photo cache. Are you able to sync if you delete your existing photo cache? To find it, see the following document:
    iTunes: Understanding the iPod Photo Cache folder

  • HT204266 Trying to check for updates but when I hit updates I keep getting the message  cannot connect to iTunes. I'm signed in in my settings so not sure what else to do?

    I'm trying to connect to the app store to check for updates but when I go to the update tab I keep getting the message cannot connect to iTunes store. I am signed into iTunes in my settings so not sure what to do!

    You should not get that message if you are simply trying to load the shuffle with songs from your iTunes library.  If iTunes is trying to Update or Restore the shuffle, and you get that message, try the suggestions in this article
    http://support.apple.com/kb/TS1814

  • My iTunes purchases will not download to my iPad gen4. Keeps giving the message" download error tap to try again"

    My iTunes purchases will not download to my iPad gen4. Keeps giving the message" download error tap to try again"

    I have the same problem. Did you get yours resolved?

  • My Firefox no longer works, it will not go to any website and offers the message "The proxy server is rejecting connections". I had the same problem in IExplorer but was able to fix it. I did not choose a proxy server, ever. How do I fix this in Firefox?

    I changed out my wireless router, from a Linksys to a Netgear. Everything seemed to work fine, but shortly afterward Firefox could not be used to find any websites, and gave me the message above. The same happened with Internet Explorer, but a tech representative for my ISP directed me to the page where "proxy server" was incorrectly checked and it fixed the problem. I don't know where to go in Firefox to find the same or a similar page. My laptop continued to work fine for some time after, but eventually developed the same problem. I uninstalled and reinstalled Firefox, with no luck, and all desktop shortcuts based on Firefox are inoperative. I just keep getting the message that the proxy server is rejecting connections. Since I did not select a proxy server, I don't know how to deselect it.

    No idea what "tried everything" means.
    Here is how you troubleshoot a password problem.
    Go to your email providers web mail page and verify that you have a working username and password by logging into your account there. If you cannot log in there, look for the link to reset your password. Your email password is administered with your email provider.
    Once you have a working password you need to remove any stored passwords in Thunderbird and replace with the new, working password.
    From the menu bar select''' Tools-Options-Security-Passwords-Stored Passwords'''
    Remove the passwords for the problem account. Close Thunderbird and restart it. You will be asked for a password. Enter the new password.
    No menu bar with Tools? Press the '''alt '''key.
    FYI: Thunderbird settings are stored in a different file from the program. Removing the program and reinstalling just keeps you busy for a little while and rarely fixes anything. As you have seen the old settings are picked up when Thunderbird is reinstalled.

Maybe you are looking for

  • HP Director software won't work since I installed Linksys Wireless Print Server

    I have an HP 5510 Office Jet all in one.  It comes with bundled software called HP Director that enables scanning, printing, and faxing.  The software worked fine while I had the printer connected to my pc with a USB cable. To give myself flexibility

  • Counter in column GUI ALV GRID

    Hello every one, I have a alv grid, and i have a column where i need to put a counter in the cell, so every time a new row is added, the cell of that column will be incrementing in a number and show it in the cell automatic. Im new in abap, so i hope

  • What's this Error in design time

    I have received a error in design time that says: Value cannot be null. Parameter name: objectType This occurs when i open the form in desin mode or when I add or remove a handle in code editor and then switch to design form. Can you help me   

  • UME synch with CUA

    What are any issue with UME synch with ABAP CUA? If I have one CUA should I point all of my UMEs (Java instances to a single ABAP instance). Does anyone have any experience with CUA and java? What architecture issues should I be aware of> Thanks Miki

  • F4 help setting in Query variable screen 7.0

    hi guys, you know when you execute a query you get a variable selection box and there is a little help icon next to the input field to do a selection search. how can i change its setting that if i click(f4 help) on it it only shows 25 items, currentl