TS1398 My iPad will connect to our wireless but within a few minutes of not accessing it disconnects and I have to go into settings and turn wireless off and on everytime I want to reconnect. It won't automatically pick up a connection
I cannot stay connected to the wireless. Everytime I am online it will disconnect if not accessed within a few minutes and I have to go into settings to turn wireless off than on again. We have a security key that was added when I set up iPad and tried Internet provider help line but weren't able to figure it out. Tried FaceTime and wouldn't connect even though I was getting a call request, but wouldn't connect and now FaceTime won't verify my apple I'd. Help
It's very easy to update firmware; read the manual that comes with the router?
Similar Messages
-
I bought a new MacBook Pro several months ago. I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2). I find the quickest fix ix to turn Airport off and back on. Very annoying. Suggestions please?
What kind of wireless router are you using? more importantly which protocol are you connecting with? Are you and wife connecting using the 2.4Ghz band? or do you have a dual band router that offers the 5GHZ band? Are you both connecting vie 802.11 a/b/g or n?
The best thing to do is to go into SYSTEM PREFERENCES and select NETWORK, then select AIRPORT and click on the ADVANCED button.
Under the AirPort tab you should delete all the preferred networks and only add back in your network with the proper security settings and passwords.
If you hold down the option key on your keyboard while clicking on the airport icon at the top on your macbook pro. you'll seesome data that will tell you what band and mode you're connecting at, as well as in an indication of signal strength (RSSI) if you write down and post back that information it'll tell us what's going on. -
My mail will not delete. When I move it to trash and then delete it, within a few minutes it has all bounced back in again. Checked my preference settings and all seems to be in order. Any ideas how to resolve this frustrating problem?
That sounds like a compatibility issue with an add-on that you have installed, as reported by a number of users in both Firefox 22 and Firefox 23 over the last couple of months. If you would provide a listing of your installed extensions ''(as you were prompted to do when creating this thread)'' maybe one of us can advise you which extension is the mot likely culprit. You will need to re-install Firefox 23 to do further diagnostic testing.
As far as the compatibility of Firefox 23 and Win XP SP3, Mozilla has verified they are compatible and not one user ''(including me on two separate PC's)'' has reported a problem with compatibility. -
i have an ipad 2 when i open anything that i downloaded such as games or applications it doesnt open i dont know why i tried to turn it off and turn it on again but the same problem any help plz?
If it's just the apps that you've downloaded from the App Store that you are having problems with, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
-
I purchased an ipad2 and it doesn't charge using any of the car chargers we use for the iPhone. It connects but then reads not charging.
debraojo wrote:
I purchased an ipad2 and it doesn't charge using any of the car chargers we use for the iPhone. It connects but then reads not charging.
I'm not surprised. Most car outlets do not provide sufficient power for the iPad to charge, but will work fine with an iPhone. Mine does the same thing. -
I updated as I was asked. The computer was on for a while and then turned off. Now, it won't open firefox at all. A big red 'x' and an error message pops up. Message says: The procedure entry point XRE_GetFileFromPath could not be located in the dynamic link library xul. dll.
I can open an old internet explorer, but then I can't respond to your e-mails for confirmation as they must go thru the mozilla browser. I AM CONTACTING YOU THROUGH MY HUSBANDS COMPUTER.... NOT MINE CUZ I CAN'T RESPOND TO YOUR LINKS....
This is very frustrating. I just want my old browser and bookmarks back! Please help.When resetting the iPod to factory defaults/new iPod fails to resolve a problem, the problem is likely due to a a hardware problem. An appointment at the Genius Bar of an Apple store is then in order.
-
I have a one year old Macbook Air 13. I have a brand new 22" external monitor. In turning the Macbook and monitor on, the monitor displays very well, but within a few minutes it begins this incessant blinking (temporary black out of the screen that lasts anywhere from 1-5 seconds). This has been going on for a long time (it also happended with my older monitor which apparantly I threw out when I should have kept it thinking it was the problem). From reading various blogs in the Apple support community, this appears to be a widespread problem, but I don't find a solution, only a lot of speculation. I'm very surprised the Apple folks haven't figured this out. As a new Apple user, heretofor, I have been very impressed with the support and effort to get fixes out to users. This, however, has me frustrated to the point of junking my Mac and going back to a PC. I love the Macbook Air and most of the functionality, but I cannot function without an external monitor. Anybody have any ideas, please help. Frustrated, Jim
Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you. -
My iPad won't connect to my wifi anymore. Was using it and it just quit. It is not my wifi because my daughter's iPad works just fine. I've turned it off and back on, reset, forgot this connection and nothing works. Help???
1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
My home wifi connects ok but consistantly disconnects requiring the user to go into settings, wifi, and reconnect. Very annoying. Any ideas on what causes this?
Thanks, but I have done that. All the settings on the mini are identical to the iPad 3 & still the mini won't work properly. I'm sure it was something I had to change on servers to get both the Macbook & iPad 3 working, just wish I could remember what!! Any more suggestions welcome! Thanks
-
my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.
my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.
-
IPad won't turn on without power cable and when it does, it shuts down within a few minutes
This last weekend I went to visit my sister and when I came back, my iPad was turned off. I turned it on again and all seemed fine but then within a few minutes, it went straight back off. It won't start up without the power cable attached, and when it does, it says "No WiFi" in settings, not "Not connected", but it's greyed out and says "No WiFi". I did a restore which went OK, but when I was restoring it shut off too and the restore didn't carry through. I'm really worried! I can't visit an Apple Store for a week, so I just wanted to see if I could get a rough idea of what the problem is now?
Your iPad is in Recovery Mode.
Follow the instructions here carefully:
http://support.apple.com/kb/ht1808 -
I just upgraded macbook to SnowLeopard 10.6.3 and now itunes won't recognize my iphone. I tried turning everything off and restarting. I have the latest version of itunes. If I have to reset the phone (and ipod touch), what does that mean? Will I lose anything? How long will it take? thanks
Start iTunes. Make sure you really are running the version you think you are. Sometimes people end up with two copies, different versions.
Mac OS X v10.6: iOS device not recognized in iTunes after restart - http://support.apple.com/kb/TS3540
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311 - read section on Opening iTunes for information about running multiple copies of iTunes.
You say you are running Snow Leopard 10.6.3. That version will not run the latest iTunes which requires 10.6.8 If you need iTunes 10.7 you have to be running 10.6.8
Mac OS X 10.6.8 Update Combo v.1.1 - http://support.apple.com/kb/DL1399
Message was edited by: Limnos -
I just updated the OS on my IPad. I turned it off and now have retured to it and it won't turn on. Anyone else having this problem?
Lc137-
Try resetting (rebooting) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes solves mysterious problems.
If that does not help, see if this article does: <iOS: Unable to Update or Restore>.
Fred -
My iPhone (and iPad) will receive .msn e-mails but will not allow me to respond or forward, giving an error message that says the username or password are incorrect for the SMTP, but the same configuration allows me to receive AND send from my MacBook - what can I do to correct this?
Alright, I'll take a mea culpa on this. I just recalled the one thing I didn't try which was establishing an application-specific password for the phone:
http://www.google.com/support/accounts/bin/static.py?page=guide.cs&guide=1056283 &topic=1056286
This seems to have worked. Yay! -
Help me! I have a new iPad mini that won't turn on. It was working fine this morning then i turn it off and it never turns back on. it doesnt register with iTunes and resetting isnt working either. All I did is download instagram and snapchat and poof doesnt work. I have had these apps before!
Make sure it's plugged into the charger.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Maybe you are looking for
-
Hi all, I'm having some performance problems and i have generated an AWR of a day and i have seen this following things: Top 5 Timed Events Avg %Total ~~~~~~~~~~~~~~~~~~ wait Call Event Waits Time (s) (ms) Time Wait Class CPU time 50,318 41.7 db file
-
Movement type for transfer of stock from Stock-in-transit to Vendor
Hello, Is there any movement type for transfer of stock from Stock-in-transit to Vendor. For internal transfer from Plant to Plant we follow Purchase Requisition -> Stock Transfer Order (PO Modified) -> Delivery (VL04) -> MIGO (Goods Receipt agains
-
Premiere Pro not Exporting to Adobe Media Encoder
Never had this problem before on a Mac. Now using a Windows 7 Machine. Intel Xeon CPU E5-2630 v3 @2.40 (2 processors) 64 GB Ram Nividia Quadro K4200 v. 2.1.2 Trying to export a Premiere Pro sequence to Media Encoder for encoding. Nothing pops up in A
-
I am writing a utility in which I want to find all classes with a specifed pattern, i.e. "com.ourcompany.ut.*_UT". I know that I could recursively go through the directory com/ourcompany/ut and find files named "*_UT.class", convert the path info to
-
Hi, I have developed a Smartform and that is working fine with all values that form have terms and conditions and subtotals if i have one page i need to display in the first page all the terms and conditions if i have more than one page i need to di