TS1398 My iphone 5 has suddenly decided it wont connect to wi fi network,

I've had this issue a couple of time before but usually switching it off an on again fixes it, this time it still wont connect.
Any ideas how to fix it, ive tried turning router on and off, other people with the same phone and ios can connect but i cant.

Try first, Settings > General > Reset > Reset Network Settings
If no joy, try
Settings > Wi-Fi > select you wi-fi SSID > Forget this Network.
Now do manually key in your Wi-Fi SSID and password. (Do not use the automatic wi-fi list)

Similar Messages

  • My ipad has suddenly decided not to connect to the internet. My WiFi signal is strong. My PC is connected ok through the same WiFi signal. I have tried pressing the home and off buttons to get the apple logo but this makes no difference

    My ipad2 has suddenly decided not to connect to the internet either through Safari or email. My WiFi signal is strong and all other devices in my house are connecting ok. I have tried pressing the home and off buttons together to get the Apple Logo but this has not changed anything, still cannot connect. "Safari cannot open the page because your ipad is not connected to the internet"

    I have done this and no difference
    I have just realised what has caused the problem.
    Yesterday I fitted an additional Homeplug with built in wireless N adapter ( I alreday have another type fitted from my main router position) The wireless system to my ipad is obviously "confused" . Having now removed the second homeplug and reset my ipad all is now ok

  • HT201263 iphone has completely dead, it wont connect to power supply or PC and won't re charge

    My iphone 4 has completely died - it wont connect to the power supply, wont connect to PC nothing - any suggestions ??

    Maybe the fact that it's dead has something to do with it...?
    If a reset didn't work, make an appointment at the Genius bar and let them look at it.

  • My iPhone has suddenly started sending emails in Courier New (rather than the standard Arial).  They appear in Arial when I compose them, but turn to Courier new in the sent folder and when displayed to the recipient.  I use Yahoo Mobile Mail.  Help!

    My iPhone has suddenly started sending emails in Courier New (rather than the standard Arial).  They appear in Arial when I compose them, but turn to Courier new in the sent folder and when displayed to the recipient.  I use Yahoo Mobile Mail.  Help!  How can I change the settings so that the sent emails go back to Arial?  Thank you!

    I'm not sure if it's a Yahoo Mobile mail or an iphone issue... have asked the Yahoo forum but no replies yet...  Any help appreciated!

  • HT4623 My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the char

    My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.

    Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.

  • IPhone 4 suddenly decided passcode incorrect.  Must I restore?

    Hi
    iPhone 4 suddenly decided my passcode was incorrect and disabled itself after I tried accessing it.  Have synched with iTunes, but problem remains.  Is my only option to attempt a restore?
    Thanks

    THere is a simple fix for this.  Open YouTube, search for any video.  Play it.  While playing, repeatedly press the volume up button on phone side, until at max sound level.  Now close YouTube.  Now take a new video on your phone to test it.  You will now hear sound on your video recording.

  • HT201272 The screen on my iphone has suddenly become very sensitive and mutes all the time?

    The screen on my iphone has suddenly become very sensitive and mutes ny calls all the time I know there was a bug fix but don't know how to find it?

    If your screen is flickering, you might have a hardware issue there. I would take Macie to the doctor and have her checked out.
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • After updating my iphone 5 to ios7 it wont connect to the internet

    after updating my iphone 5 to ios7 it wont connect to the internet

    This helped me
    One of the most common complaints we are hearing from users is that they have been unable to access wi-fi and Bluetooth after installing iOS7.
    Here are a few things you can try:
    - Change the name of your device
    The new operating system seems to have an issue with apostrophes. At least when it comes to wi-fi.
    Check out your device name. If it is called something like “Claire’s iPhone” it could be the apostrophe that is causing the problem.
    To change your device name go to Settings > General > About > Name. Tap on the name to edit it and remove the apostrophe. Save the change. Switch off your phone and then switch it back on again.
    Your wi-fi should be working.
    We have no idea why this seems to work but many users in Apple’s community forums have said that it works.

  • I just got an iphone 5s and now it wont connect to any of my windows 7 PCs, it just gets detected as an unknown device and is unable to be detected correctly.  It was connected to one windows 7 pc about a week ago and worked but now I tested it on 2others

    It is a 64 GB Iphone 5s and I am running Windows 7 x64 on all of my pcs.
    I just got an iphone 5s and now it wont connect to any of my windows 7 PCs, it just gets detected as an unknown device and is unable to be detected correctly.  It was connected to one windows 7 pc about a week ago and worked but now I tested it on 4 other computers including a macbook running osx and it isnt detected.  I tried the whole Apple Guide and it was no help.

    install the latest version of itunes

  • HT1414 i just had my replacement iphone 5, and now it wont connect to itunes to activate

    i just had my replacement iphone 5, and now it wont connect with itunes to activate

    The servers are getting slammed. Bunch of people trying to download iOS7 at the same time.
    There is a chance activation servers might be down/slow for now. Just keep trying throughout the day.

  • TS1398 I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.

  • HT4199 my iphone 4s. Wi-Fi not connected. Choose A network ... this prob solve ?

    My iPhone 4s
    Question: Wi-Fi not connected. Choose A network ...
                    This prob solve ?
    phone configuration:
    capacity: 27.3 GB
    version: 8.0.2(12A405)
    Model: MD241LL/A
    Serial Number: C2*******TD6
    Wi-Fi Address: A8:FA:D8:2E:5E:50
    IMEI: *****
    ICCID: *****
    Modem Firmware: 5.4.00
    <Edited By Host>

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Also, I requested that your post be moved to the iPhone form. This is the iPod touch forum?

  • Airport wont connect on my home network when its password protected but..

    Airport wont connect to my home network when its password protected. It will connect to my network if i go into my linksys router and set the network to "not password protected". If i put on the security and choose a pass phrase it always says connection failed when i try to connect to the network. anyone got any suggestions on what to try ?
    ps and yes i am putting in the password right

    Hi Nickerjones
    When you enter your password for the Linksys router, is it generating a separate code phrase? By this, I mean if you enter "password", the Linksys converts this to a code that might look something like "ju457re76en7pq" for example. The code is generated based on an algorithm that Linksys uses for their products and should be visible in the set up page. Sorry, I haven't used Linksys for several years so I can't remember all the details.
    Other manufacturers use different algorithms for their products, so if you entered "password" on an Apple product, it would likely convert the phrase to a different code, which the Linksys would not recognize. If you can locate the actual code that the Linksys generates when you enter your password and use that same exact code when you enter the password for your wireless on Airport, you may have your problem solved.

  • IOS has suddenly decided to download hundreds of messages

    It's just streaming downloading messages going back into last summer in groups of 250 messages. Have no idea what it's doing or why. They all seem to be from a GoDaddy POP account. I have 489 unread messages, and it's just started another 250 batch. Anybody know what's going on with the OS and how to stop it before it fills my phone?
    Thanks.

    SSo what changed today that the photo suddenly decided it needed to download these messages again. Why doesn't a message deleted in the iPhone immeduately reappear in the iPhone or reappear 10 minutes later? Why were they gone one day and then reappeared the next? The behavior yesterday was different from the behavior today. Yesterday I would delete a message from the inbox and it would go to the trash. It didn't redownload. Why today did it decide it suddenly needed to redownload a thousand messages? What changed? The date?

  • IPhone has suddenly powered off?

    My iphone 5 has suddenly powered off. It won't charge either?

    Howdy eemfish,
    The article linked below can help restore your ability to turn on your iPhone.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    http://support.apple.com/en-us/HT201412
    Cheers,
    Allen

Maybe you are looking for

  • Printing checks from payment program F110 with smartforms

    Hi! I am working in ECC 5.0 and I want to print checks from the payment program with a smartform, I created a non standard smartform but when I try to link the smartform with the program by transaction FBZP the available options are SAPScripts only.

  • Printing PDF with FOP is very strange

    Hello, i have a very strange problem. My old environment Oracle 10.2 DB Apex 4.0.2 Apache FOP inside a OC4J Container My printing Report contains 9 Queries and each query is using some bind variables. We also use our own report layout That works sinc

  • Just A Thought About Database I/O

    I was just thinking about the database in Lightroom and came upon a question that I hope I can ask clearly. Let's say I have an image open in the Develop module, and let's say that I click and drag on the Blacks slider. When I move that slider to mak

  • SCCM 2012 - Issue

    Hi All, Unfortunately one of my collegue deleted the primary server computer account. But with a good back up i have recovered the primary site server back to normal condition. Since then i got some errors throwing up from the console. Please help 1.

  • [JS - CS4/CS5] PageItems instances

    Hi, is there a way to know if an item is a Rectangle or a GraphicObject with a for-cycle through pageItems or do I have to make a for-cycle for Rectangles, one for Graphics and so on? Thanks!