TS1398 My on/off toggle in the Wi-Fi screen is not functioning.

Anyone have a solution?

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Similar Messages

I REALLY need an on/off toggle for the delete video feature. Any Ideas?

My son has Autism and uses an ipod touch and proloquo2go (AAC communication software) to communicate since he is functionally non-verbal.
He also has music and videos for entertainment on the ipod. I've been fighting for a year now that he keeps deleting all of his movies and then get's mad that they aren't there. I don't always have the option to resync so this can be very stressful at times. Life in general is stressful on a daily basis with his disorder :-(
A simple on/off toggle in the settings box for the feature similar to the app deletion toggle would relieve sooooo much stress here but alas, it does not exist.
For a year now I have been searching for a solution with no luck. I have seen quite a few people with the same problem come up empty as well.
So, is there any way to make this happen?
Even an alternative video app with a toggle to disable this feature would work. I've tried quite a few but they all work the same as the stock video player with no video protection.
I would NOT AT ALL mind paying for such an app or feature if it is, or will be available. I believe there is a market for it as i know of many disabled kids in our global special needs community that use a ipod/ipad as a communication device.
Any help would be greatly appreciated,
Sincerely,
-Michael Sullivan

Thanks for taking the time to respond. I sent a request to Apple, hopefully they will pitty me and/or maybe others have taken the time to ask the question as well.
It seems like such a simple thing but it would make such a huge difference for me every day.
-Mike

My iPad air does not have an lock on/off toggle for the smart cover ipad cases.

Last week I received my new at&t 64gb iPad air. (This is my 3rd iPad. 2nd that, I assume, can use a smart cover style ipad case.) Although I have not purchased a new cover for it yet. I could not help but notice that in the Settings/general there is no "Lock" on/off toggle for the magnetic cover as ther is on my iPad3. does anyone know if there is supposed to be one on the ipad air or did apple do away with the toggle altogether?
Any help would be appreciated.

Settings > General > Lock/Unlock shoud still appear.
You must be running iOS 7 (which you presumably are doing on an iPad Air). And you should be using a Smart Cover or Smart Case made by Apple. Third party covers/cases may well not function.

TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I have an ipod touch 3rd generation and the whole touch screen is not working.

I have a 32gb ipod which I bought for fifty dollars and when i bought it had a pretty baddly cracked screen but thing is it worked fine. Every part of the screen worked fine; it was as senstive where the screen was cracked as the areas of the screen that were not cracked. I dropped it a couple times from like two or three feet on two a hard wood floor about four times all it did was make the cracks on the screen a little worse. Then one day I dropped it from about a foot and now the whole touch screen is not working does anyone know why this is. They told me at the ipod store to get a new one would be 130 to trade mine in. But the thing is I very mechanically inclined and I am very good with electrionics; I was planing on buying the glass for fifty bucks and putting it on myself because I read how to do it and I am more then capapble of doing it. But now since the touch screen is now working; do I need a new screen along with a new glass? See the thing is because I think both those part cost 120 together. Which would not be worth me doing that when I can go to the ipod store and they would trade me a new one for 130 bucks. But the issue is, they told me at the ipod store they would have to look and see how damaged the ipod is to see if they will exchange it. My screen is severly cracked; also I have a dent that is a half inch long and 1/8th inch deep in the back of my ipod and its very scracthed up; do you thing an ipod store would exchange it in the condition it is in. Also has anybody had this problem before and I was wondering if it would be possible for me to take it apart and fix it my self without buying any new parts.

If I were you, I would pay the $130 for a replacement. Then you can be sure that it has all the working parts it needs.

I have an iphone 4, when I upgraded to ios 7.1.1 the application 'superlive pro' is not functioning well it is stucked and some times the device needs to be restarted

I have an iphone 4, when I upgraded to ios 7.1.1 the application 'superlive pro' is not functioning well it is stucked and some times the device needs to be restarted

if there is a compatability between the app and newer versions of the ios then likely the developer if he/she knows about it will release an update fixing the issue
but of cause the developer has to know about it so maybe you should inform the developer about the issue and wait for a fix

IPhone 3G stuck at the Apple logo screen; will not boot!, continued

This thread is a continuation of
[iPhone 3G stuck at the Apple logo screen; will not boot!|http://discussions.apple.com/thread.jspa?threadID=1600894],
which has been locked.
The thread was too long and some browsers were timing out.
The above link goes back to the original thread.
Thank you.
Apple Discussions Hosts

Add me to the list of people furious with Apple about this problem...
...I have just got back from a 2 week holiday in Spain, and on day 3 of the holiday my iPhone rebooted itself and stuck at the Apple logo.
What's more annoying, I'd purchased a data abroad plan from o2 for £50 and hardly used it because I couldn't use my iPhone because it was stuck on the **** Apple logo. o2 will not refund the plan I purchased because I had started to use it (about 2.3MB to be precise).
Good job my girlfriend had her trusty Sony Ericsson phone because at least it WORKS as a phone, unlike this **** iPhone 3G which only has one use - as an expensive paperweight.
Come on Apple, at least admit there is a problem and show your loyal customers that you are actually aware there is a serious problem that is causing your iPhones to become utterly useless.
I'm seriously thinking of gettting rid of this iPhone and getting a cheap no frills phone - at least I can use it to make calls.

Using FCE 4 to edit mov file, inserted 8 chapter markers by double tap M, enter title, click add chapter marker. Rendered and half of the chapter markers unrecognized or not functional. Delete FCE prefs and redo project did not help. How to fix?

Using FCE 4 to edit mov file. Added 8 chapter markers by double tap M, enter title, click add chapter marker. Rendered and 4 of the chapter markers are skipped or not functioning. Deleting FCE prefs and rebuild project did not solve. Solution anyone?

Thanks for taking a look, I am pretty new on a Mac, is this the data you need?

TS3274 In my iPad's Photo folder, after I select edit, and apply check marks to specific photos, the red 'Delete' button does not function. How do I correct this issues?

To anyone familiar with iPad 2s,
After I select the Sunflower Photo icon and touch 'Edit', apply check marks to specific photos I want deleted, the red 'Delete button doesn't function. How do I correct this?
Thanks

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

When I upgraded to 4 the printer icon disapeared and the print under "file" does not function

When I upgraded to 4 the print icon dissapeared and the print button under the "file" drop down does not funcion. I have

try this:
remove the driver in system preferences > Print
select the printer then click the minus button
right click in the white background of the printer column > reset printing system
reinstall the driver
then repair permissions in applications > utility > disk utility

Actual cost in the workplan task screen (hierarchy) not show value.

Hi all,
Could you advice me about actual cost if I want to show in the workplan task screen (hierarchy).
Thank you.

Well, then just check the master data setting in Query designer--> choose 0Costcenter and check the properties > choose advanced tab> under filter value Selection during Query Execution . check for these options
1.Only Posted Values for Navigation
2.Only values in Infoprovider
3.Values in Master data table
4.Characterstic Relationship.
You need to choose the 3rd opitions as you need to read the master tables for 0costcenter.
Hope it helps,
Cheers,
Balaji

HT2292 Phone indicates connection to itunes on screen, will not function, after rebooting the itunes connection screen is still there.

While downloading update, itune connection screen will not go away, phone will not work even after rebooting with itunes connection screen reappearing

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

The all windows feature is not functioning properly

When I used the all windows feature ( via gesture, hot corner, or key (F3)) only the minimized windows are represented. The open windows are faded to the background, all of them. It seems to work when the computer first starts up.
I honestly have no clue what sparked this issue.
Any Ideas?
And has anyone else had this issue?

Hi Raj
The error "The SSL support feature is not properly configured. Https is not available" will not cause any problems for you during synchronization. The reason that this error is displayed is due to the fact that by default MI is configured to support HTTPS Synchronization and not HTTP. This is because it is recommeded to use HTTPS sync inorder to transmit data in a secure manner and this is very necessary in customer production system. This so called error will not have any impact on sync but is just an information to the administrator. This can be disabled by the use of parameter <b><i>MobileEngine.Security.SSLSupport=false</i></b> but make sure that this parameter is set to false even before performing the first sync i.e before obtaining a device id. If you set this value to false after performing some syncs, the error is still visibile in either the Web Console or the NetWeaver Administrator because it would have been sent by the previous sync and these statments are retained and never purged. Hope this helps and clarifies your doubts.
Best Regards
Sivakumar

Single TaskButton in the Cisco CAD Client is not functioning

Hi ALL,
we are facing issues with respect to Cisco CAD Client application.
We are using I.C.M Version 7.5.8.
1)We have a set of Task Buttons configured, where as one of the Buton is configured for a Blind Transfer(InThis Case TASK1) is not functioning randomly.
2)We have configured this to transfer back to I.V.R.sometimes after clicking twice or thrice, it works some times it does not transfer at all.
3)No Error is observed, except the call is not getting transferd back to I.V.R.
4)Have gathered the Agent Level Desktop logs and noticed TimeOut Messages .Please find below the LOG Snippet for reference.
2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: MF1756 User clicked TASK1 button
2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[1780] CAppearanceEventWnd::DoActions: BEGIN
2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[2105] CAppearanceEventWnd::GatherInformation: End
2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[1829] CAppearanceEventWnd::DoActions: Executing action Call Control
2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: AC0810 Executing Action: Blind Transfer Type: Call Control, String: BlindTransfer
2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: MF2650 BlindTransfer: Actually doing single step transfer with callID 44529571
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1047 ==================== BEGIN CompleteTransfer ====================
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1048 CompleteTransfer:                HeldCallID: 44529571
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1049 CompleteTransfer:          ConsultantCallID: 44529571
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1066 CompleteTransfer: Requesting Single Step Transfer.
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1081 CompleteTransfer: Successfully complete single step transfer call. ConsultantCallID 44529571 - HeldCallID 44529571
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1110 ==================== END CompleteTransfer ====================
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownObjectID]
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0609 OnCTIOSFailureEvent: ErrorMessage [[call.5002.44522460.12180] Couldn't find CallConnection with DeviceID of 39451880.]
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownEventID]
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0609 OnCTIOSFailureEvent: ErrorMessage [[call.5002.44522460.12180]::Operation eSingleStepTransferRequest was not successful on object call.5002.44522460.12180.]
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: MF1756 User clicked TASK1 button
2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[1780] CAppearanceEventWnd::DoActions: BEGIN
2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[2105] CAppearanceEventWnd::GatherInformation: End
2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[1829] CAppearanceEventWnd::DoActions: Executing action Call Control
2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: AC0810 Executing Action: Blind Transfer Type: Call Control, String: BlindTransfer
2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: MF2650 BlindTransfer: Actually doing single step transfer with callID 44529571
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1047 ==================== BEGIN CompleteTransfer ====================
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1048 CompleteTransfer:                HeldCallID: 44529571
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1049 CompleteTransfer:          ConsultantCallID: 44529571
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1066 CompleteTransfer: Requesting Single Step Transfer.
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1081 CompleteTransfer: Successfully complete single step transfer call. ConsultantCallID 44529571 - HeldCallID 44529571
2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1110 ==================== END CompleteTransfer ====================
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownObjectID]
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0609 OnCTIOSFailureEvent: ErrorMessage [[call.5002.44522460.12180] Couldn't find CallConnection with DeviceID of 39451880.]
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownEventID]
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0609 OnCTIOSFailureEvent: ErrorMessage [[call.5002.44522460.12180]::Operation eSingleStepTransferRequest was not successful on object call.5002.44522460.12180.]
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
Kindly request to give your suggestions for occurence of this error , which is happening for only single TASK BUTTON

Hi Sathya,
The message below is a generic error, you will have to look more into all the PG logs (jgw, opc, pim, cg, ctios) to see why the SST is failing.
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownEventID]
Use the HeldCallID and ConsultantCallID from agent dbg to track the call in the PG logs for further clues.
If you are not after RCA, cycle the PG services this should help however most likely the problem might reoccur after sometime.
Thanks,
Shirish.

My send button on the iMessage screen will not function. I have tried it in every screen position ie. rotated the screen 90 degrees each time. With no results. Any suggestions?

My send button in iMessage does not function. I have tried it in every position ie rotated the screen 90 degrees each time but still will not send the message. Any ideas or sugestions?

Try this:
First you can try signing out messages and then back in.
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

TS1398 My on/off toggle in the Wi-Fi screen is not functioning.

Similar Messages

Maybe you are looking for