TS1398 my wifi is showing connected but i am not getting internet access. When in the settings wifi settings you can see the wheel or timer spinning but never a check mark like my other iPad.
my wifi is showing connected but i am not getting internet access.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
My ipad suddenly cannot connect to wifi internet,you can see the icon that its connected but most of the apps are not opening with message not connected to internet...
Please your suggestions / help are very much appreciated
ThanksTry This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings. -
My project in imovie says source unavailable after I moved the events to the backup drive. It is connected and shows up in the events library. I can see the pictures but they won't play without the source. What do I do.
I moved it because I did not have room on my hard drive to import my latest video. I take videos my grandkids basketball games then edit them as projects. I don't have room to move the whole events library back to my hard drive. Can I move part of it at a time.
I filled up my 1 TB back up drive so got a 3TB to move my video projects to. Do I have to move both the i photo videos and the projects to the 3 TB drive together some how. When can I delete them off the hard drive .
I moved all the i photo library to the 3 TB drive and deleted them out of i photo. That is 87 GB which I don't have room for on my hard drive.
I think when I use the export movie to my hard drive it works but will I still be able to edit it later if I want. Is it best to do quick time or i tunes if I use the export feature. -
I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.
Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card? -
Help i clicked something and now my big wont show up big.. its there but black.. you can see the names that are tagged but no pic.. ive tried view ect but nothing
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture? has anyone got any ideas as to what the problem is, is it self-repairable or even repairable at al?
The LCD Display connector has partially come loose from the logic board connector, and simply needs to be pressed back down into place. Or the front screen assembly is now faulty, and needs to be replaced again.
-
My mac book air connects to my network and gets internet access but airport utility cannot find my airport base station to set up time machine
airport utility cannot find my airport base station to set up time machine
Normally, AirPort Utility is not used or needed to set up Time Machine backups......unless a default setting on the Time Capsule to Enable File Sharing has been changed.
On the other hand, if you open AirPort Utility, a picture of the Time Capsule should be displayed. Are you saying here that the Time Capsule does not appear when you open AirPort Utility? -
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Hi Bryan,
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
Hope that works for you.
Kevin -
Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?
rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle? -
Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?
I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks. -
I tried exporting my film, but it wouldn't export. So, then I tried rendering all of the clips. However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?
What version is FCPX and what version is your OS?
How are you exporting and with what preset?
Luckyl1987 wrote:
However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?
No idea about that.. Can yu post a sreen shot of the error message?
Russ -
After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.
Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT -
The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I just got!
First off, I would STRONGLY suggest that a external hard drive would make you life much easier by at least being able to back up your songs on the external drive for when you need them. Even if you don't want them in the iTunes library, you can have them all ready on the external to be re-added as needed. You can get 100's of gigs for under $100 shipped.
Anyway, since you used Yamipod, are all the songs back on the computer? If so, I would go ahead and restore the iPod, let iTunes then resync everything back to the iPod, then switch it back to manual and see if the restore and resync clears up the issue.
Patrick -
My MacBook Air 2012 turns on an the key board lights up however the screen stays black but when I shine a torch through the apple sign on the back you can see the login is there a way to fix this??
1. Press the F2 key couple of times.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
I let my phone dry out in rice for over a week. I see it turn on but the screen is black. If you hold it to a light you can see the Apple logo. How can I fix this?
It depends which country you are from below is US
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Maybe you are looking for
-
How to read file from remote machine
Hello, Hi, i would like to know how to read text file from remote machine using java source code, any code ? Thanks very much; Best regards Kim
-
Install of OEHR not working on Apex 3.0.1 and Oracle 10.2.0.3
Hi, I've tried this about 10 times and it's driving me mad. I'm trying to install the OEHR sample application in to new workspace and after the install finishes and it all looks like it worked perfectly. However there seems to be a problem in that on
-
User profiles for different hardware configurations
I have a MacBook that I want to attached to an external monitor and keyboard. Is there a way to configure it so that when I attach the monitor and keyboard it will configure itself so that I can close the lid without it going into standby mode? I wou
-
Link Query and Ref Cursor Query
Hi all!! How can I link Query and Ref Cursor Query?? I mean, How can I pass input parameters to the PL/SQL procedure if they are not User parameters but they come from another table?? Thanks a lot F.
-
Why class defination and class implementaion separated in abap?
hai experts, i hav doubt why class defination and class implementaion separated in abap. In know in C++ its possible but in JAVA its not possible . what is the main reson behind this concept in ABAP. thanks in adv.