TS1398 Problem connecting to both Wi-Fi and Phone networks at same time
I am having a problem on one of our iphones, where it won't connect to both the phone's network (Sprint) and our home Wi-Fi network or any other Wi-Fi network at the same time. We have another iphone and an ipad that both connect just fine, so it appears to be something specific to this phone. When connected to Sprint's network so we can use the phone (all the time), it doesn't find any networks. So, if I reset network settings, etc., I can eventually get it to find our Wi-Fi network and connect, but then it shows No Service to the phone network. Once you leave the area of the Wi-Fi network and it disconnects from it, the phone service starts to work again. I've done every network reset there is, removed the SIM Card, etc. but it continues to happen. Any ideas what might be happening?
If it is your home router that you can't connect to try rebooting it. Unplug it for about 15 seconds.
Similar Messages
-
Can I connect to both TC wifi and home wifi at same time?
I don't see this listed anywhere and I assume the answer is "no." But here goes...
I would like me TC to be on a separate wifi for all my apple devices in the home for backups only. I have about 5 devices including 2 ipads and 1 iphone. Then allow those same devices to connect to the home wifi for surfing. Basically, I want Time Machine to access one network/password and my browsers another network/password. Of course, I want this to happen automatically and not by selecting the TC network each time I want to backup and then switching to the other when surfing.
I know I could connect to my router via hardwire, but was hoping I didn't have to do that.
ThanksThanks... I assume I could switch back and forth between networks if I really wanted them to be on separate networks?
If you cannot run ethernet.. see if homeplug (ethernet over power) adapters might work for you.. when they work they can work very well.
You can also add a wireless bridge between the main modem and the TC.. but for this to work it must be another apple router. eg express or a cheap second hand extreme can work nicely.
Let me say you will very quickly get tired of switching.. whatever you are on,, you will want the other.. start the network design right.
Indeed, both Bob and I will tell you, if at all possible run ethernet.. do it properly in the wall.. get a data cabler in if you are not up to the job.. yes it is expensive.. and once it is done.. it will work properly forever more.. no other solution works as fast.. is reliable and is hassle free. -
My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?
OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013 -
If i purchase the PS, can i install it on both my PC and MAC at the same time?
if i purchase the PS, can i install it on both my PC and MAC at the same time? I use the PC at home and MAC while on the road.
yes, if you subscribe to cc (which included ps cs6, ps cc and ps cc 2014).
no, if you purchase ps cs6. -
the battery does not even show up. Have tried holding down both on/off and enter button at same time
Doesn't appear to have any life. Not that oldI have tried several plus into the computer itself
-
Galaxy S6 - Web and phone at the same time?
I just got the new galaxy s6. I can't go on the Web and be on the phone at the same time! My s4 did. Does anyone else have this problem?
This is standard for iPhone 5S on Verizon or Sprint (CDMA) carriers. iPhone 6 can do simultaneous voice and data on Verizon, but not 5S.
-
Using gps and phone at the same time
I am using the S6, great phone however I noticed today that I cannot use GPS (Waze app) and be on the phone at the same time.
Is this really the case or am I missing something? I previously had the Galaxy S3 and I did not have an issue with this.
Please tell me this is just a setting issue not an issue with the phone.
Thank youThis is standard for iPhone 5S on Verizon or Sprint (CDMA) carriers. iPhone 6 can do simultaneous voice and data on Verizon, but not 5S.
-
HT1386 syncing i4phone 4s so that it deletes email on computer and phone at the same time
syncing i4phone 4s so that it deletes email on computer and phone at the same time
Has nothing to do with syncing your phone. Determined by what type of email account you have. To keep mail in sync requires an IMAP or Exchange account, not possible with a POP account.
-
How to show a picture both on client and server at the same time (X11?)
Hi Guys
I want show a picture on my client as well as on the server(in another location) at the same time, pretty much like showing something both on laptop and on a projector. Assume I have a picture sssss.jpg on the server A1, if I want to open that picture to my client, I can simply to do the following from client A2:
xhost A1
telnet to and login A1
setenv DISPLAY "ipaddress of A2":0.0
Anyone can direct me how to show picture the client that I am sitting at an also show on the server at the same time?
ThanksVNC would let you do that. With a shared connection, both machines could run a VNC client to the same session.
Darren -
Can't connect to internet via router and airtunes at the same time
Can anyone help me connect to the internet via my BT Homehub, and play AirTunes through my Airport base station at the same time? I can only seem to do one at a time.
I've seen the articles about setting up clients etc but don't get it. Using the Airport Assistant utilty doesn't really help either. Would like someone to go through the steps I need to follow.
ThanksTo set up AirTunes on the AirPort Express Base Station (AX), connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select your BT Homehub wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked) -
Is it possible to run both Netflow v5 and v9 at the same time
Hi All,
Just wondering if it is possible to run netflow version 9 and version 5 at the same time (to different destinations) on the same router please?
Thanks very much
Regards
AmandaNo Amanda,
we cannot simultaneously configure both versions of NETFLOW on cisco ios. After configuring firstone when you try to configure other version it will override the previously configured version.
"Please do rate helpful posts" -
Hello i opened logic 9 and logic x at the same time after that i lost audio in both programs i can only hear audio in the main output of my interface motu 828MKII
can somebody help me please? am in the middle of o project thank'sDid you reset Logic's audio preferences?
Did you do a hardware reset of the MOTU unit?
Try deleting preferences in Logic X
See my post in this message.
https://discussions.apple.com/message/24614057#24614057 -
Officejet Pro L7780 Wired and wireless networking at same time
I have an officejet pro L7780 printer that I would like to use wired and wireless networking at the same time. It that possible. The printer is connected directly to the network by ethernet, but I would like to print wirelessly with an ipad or iphone using HP ePrint Home and Biz.
Thanks,
Maurice HawleyThe bad news: no it is not possible to have two connections active on your printer at once.
The good news: the router will connect any device to the printer regardless of how the printer or the devices are connected. So your iPad can print to a printer that is wired (with Ethernet) to your router.
If it does not work, restart your router by pulling its power plug momentarily.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Using iPod both in Windows and Mac at the same Time?
I was wondering if it was possible to use my brand new ipod both in Mac as in Windows without having to format or restore it every time?
The idea is to use "manually manage songs" on both Operating Systems.
Thanks for your help!iPods come formatted Windows and will work on Macs and Windows. Unless you Restore it in a Mac, it will stay formatted Windows.
If it doesn't work, put the iPod on Disk Mode and iTunes should recognize in both systems.
If it is formatted Mac, it will not be useable on Windows, even in Disk Mode. -
Can I setup Lr6 on both my Imac and pc at the same time and share fles?
I am new to the cc, I would like to subscribe to the cc to have access to Ps and lr. I want to be able to setup both programs on two different operating systems, an Imac and a PC. I have 6 terabytes of storage at the Imac and would like to have access to those files from my pc also.
yes.
install on both and then setup your file sync, Download Adobe Creative Cloud apps | Free Adobe CC trial
Maybe you are looking for
-
Same vendor code for multiple company codes
Can we have same vendor code for two different company codes ?
-
Placing Web Photo Album into Dreamweaver Template?
I have a templated through the Dreamweaver program that I am using to create a site. The first page is great. I saved the index page as a newly named page to copy it to make my next page. I then want to replace a section of that page with a web photo
-
hai Friends, i have given business content activation task for fiar module,presently i am working on new implementation of bi7,but when activating business content in bi7 without any migration, i got 3.x flow for all my objects(cubes,
-
Hello everyone, A month ago, I had several dark pixels on brand new iphone5s, went to shop to have it replaced. Waited 15 days and finally got replacemnt phone, luckly working fine. I loaded backup of the previous phone to it, and noticed that each t
-
After Mavericks upgrade, cannot backup to Time Machine to latest gen Time Capsule
I recently upgraded from Mountain Lion to Mavericks. I use the latest generation 3TB Time Capsule and my Macbook is a 15-inch Early 2011 2.7Ghz i7 with 16GB RAM. After the upgrade, Time Machine would initiate to the Time Capsule, but get stuck on "