TS1398 The only problem I have is why would my iOS device (iPhone 4s) stop being compatible with my older third-party router after a software upgrade?
I think it's a driver issue not a hardware issue, I can use wifi at work just not at home...
I have an iPhone 4s and it seems to connect to the wifi where I work without any problems. I cannot connect to my wifi at home even after turning off encryption, after looking around the discussion threads about what other people are experiencing I am convinced that it is a driver issue. How can my iphone just stop working after an update?
My girlfriend's ipad 3 has the same problem, I sure hope apple can fix this problem or this will be the last iPhone I ever buy.
Hello Brad,
I've stated that I've rebooted my router , disabled encryption and updated the firmware none of which have fixed the problem.
Also, I've stated that my wifi works with my iPhone 4s when I'm at work, it doesn't work with my wifi at home so I know that it is a driver issue related to older routers. My girlfriend's ipad 3 stopped working on our home wifi after the update as well.
I can confirm that my wifi issue is with my home network not my work network. I've tried changing encryption types, disabling encryption all together etc.
You can only restore in DFU mode if you use iTunes to backup your iPhone which I don't since I back everything up to my iCloud.
brad805 wrote:
gdgmacguy has great advice, "Have you rebooted your router? Have you contacted your router's vendor to see if you're running the most recent firmware? Did you try this?
I have seen WiFi problems regarding iOS 6 all over the Web. These were problems with the WiFi, but how many try WiFi other than their home WiFi. Your home WiFi is a problem. The fix for some users is DFU Mode Restore of iPhone. If you would like to try a DFU Mode Restore.
Here are the steps. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons for exactly 10 seconds, release the power button, keep holding the home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds of holding home button. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode is sometimes difficult to get. So keep trying the steps until you get it. DFU mode is iTunes saying iPhone in Recovery Mode except screen is black, blank.
Similar Messages
-
Every time I do all the steps to reset the questions the only problem I have is that I noticed in the link to reset them using an email the email in the link don't match the one I created my account with. Does anyone know how to fix this problem?
You won't be able to change your rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to upadte your rescue email address for potential future use -
I just got my iphone and i want to get all my apps and music from my ipod onto my iphone. the only problem is that my itunes is not recognizing my iphone in the devices. in fact there are no devices at all listed. Please help!
See either:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows -
My old computer has crashed and my itunes account went with it. The only place I have my unpurchased songs are in my iPhone. How can I transfer them to my new iTunes account?
Follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
It appears that there is a flaw in the Apple iTunes 11.0.4 (62) installer related to mobile devices and the USB port. The below fixed the problem for me.
The symptom was iTunes 11.0.4 (62) was not connecting to my son's iPodTouch 1st Generation. Many other iPad, iPods and iPhones are reporting having this problem on many different computers both Mac and Windows. >56,000 on Apple discussion forums.
The iPodTouch was recognized by the computer and would charge but iTunes would not recognize the iPodTouch.
All of our family's other iOS devices worked fine.
The problem is not the computer, the cabel, the OS or the device.
Apple's suggestions in various tech docs did not solve the problem in and of themselves. I had to go back down to the previous version to force the current version to reinstall properly:
Deleting iTunes 11.0.4 (62) and reinstalling did not solve the problem.
Deleting iTunes 11.0.4 (62) and installing iTunes 10.7 made Will's iPodTouch connect fine but then there were other problems.
Deleting iTunes 11.0.4 (62) and installing iTunes 10.7 and deleting iTunes 10.7 and reinstalling 11.0.4 (62) solved all problems.
To Reinstall iTunes: (from Apple docs)
Quit iTunes
Delete:
/Applications/iTunes
/System/Library/Extensions/AppleMobileDevice.kext
/System/Library/PrivateFrameworks/MobileDevice.framework
/System/Library/LaunchDaemons/com.apple.usbmuxd.plist~orig
but do not delete com.apple.usbmuxd.plist
Restart
Reinstall iTunes version desired
Open iTunes to test and make sure iOS devices connect
Restart
Open iTunes to test and make sure iOS devices connectHey mkpack,
I would run through the recommended troubleshooting steps in this link:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
All the best,
Delgadoh -
I have no other details.
It's Extremely intermittent, especially on one of the live morning shows I watch. It's just absolutely awful. And I've changed the dom.ipc.plugins.enabled to false, made sure my plug-ins are up to date and someone even told me to find new plug-ins which I did and WMP and RealPlayer did the same thing. So, short of reverting back to FF 7.o or a version that works, (because I'm not sure how to do that) I guess I'll have to wait to see what FF 9.0 is like from some of the other users before updating to that. I just don't want to make it worse. I'm really frustrated with the morning show I'm unable to watch uninterrupted every few seconds.
-
When my mouse hovers over the bar on firefox 4 it turns black so if i hover all of them all of them turn black and stay black and i cant see anything. Also I am using an alienware m11x with a dual core duo 2 Su700 (@1.3) (@1.3) with a 1g nvadia graphics card 335m geforce.
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show -
my computer crashed so i had to reformat, but the only problem is i lost my old itunes account, had to download new version. Now i have an ipod full of music but how can i place all my music I have on the ipod into my new itunes account??
Not if you first do a sync and have iTunes make a backup. However, if your only copy of the iTunes data is in the Touch, then you need to first copy the data to a new iTunes Library using third-party software such as Phone To Mac.
-
When I try downloading apps from the app store it doesn't allow me until I have entered the security questions, the only problem is I have forgotten my answers. Please help me to find out how I can retrieve the answers back, thank you
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team. -
Why can I no longer use an image for my signature on forms? The only option I have now is "use a certificate". It was never like this until today.
Hi,
I had never heard of someone using the iPhone Number as the ID in the iMessages account in the Mac version.
i.e without adding an Apple ID
iMessages does allow iPhone numbers and mine lists mine.
I would try this.
Sign Out of the iMessages account and Quit Messages
On the iPhone in Settings > Messages remove the Apple ID
Set the iPhone to Airplane mode for a few minutes (to break with the Server)
On starting the phone up again check the iPhone Number is ticked for iMessages.
If it is add the Apple ID
On the Mac restart Messages
Add the Apple ID
At this point you should get a pop up or two saying the iPhone is using the Number and Apple ID.
Accept these and they get added to the Receive At list and Send From drop down.
9:41 pm Monday; October 28, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?
Thanks for getting back. Hadn't got round to re uploading the amended feed. I just did it now.
The only thing is, Feed Validator doesn't like it because of the picture size, and a couple of other things, it reeds the following:
Sorry
This feed does not validate.
line 22, column 14: width must be between 1 and 144: 1400 [help] <width>1400</width>
^
line 23, column 15: height must be between 1 and 400: 1400 [help] <height>1400</height>
^
line 25, column 21: XML parsing error: <unknown>:25:21: not well-formed (invalid token) [help]
<itunes:image href=http://www.whiteberg.com/Wdotfontitunes2.png" />
^
In addition, interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
Your feed appears to be encoded as "utf-8", but your server is reporting "US-ASCII" [help]
line 4, column 114: Self reference doesn't match document location [help]... dcast.xml" type="application/rss+xml" />
^ -
I'm using an older mac (2008 iMac). Things were getting slow and I used a program called DupZapper to get rid of a lot of duplicate files. It worked and my computer is running better. The only problem is now InDesign crashes at startup. I have the original disks and serial number (CS3) The error message is "required resources are missing". Same message if I try to uninstall. Any clues as to how to re-install?
reset your preferences and retry launching id: InDesign Help | Setting preferences
if that fails, uninstall (properly with the uninstaller), clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never opens, it just has the loading bar loading and then it stops, so I have no idea wat the problem is, please help
new project help
What computer operating system is your Premiere Elements running on?
Have you gone through the typical drills of
1. Latest version of QuickTime installed on your computer with Premiere Elements?
2. Running program from User Account with Administrative Privileges as well as from Run As Administrator applied to the desktop icon
with right click of the icon, followed by selecting Run As Administrator?
3. Does problem exist with and without the antivirus and firewall(s) disabled?
4. Even though the Premiere Elements 12 Editor will not open, can you open the Elements Organizer 12?
If Yes to all of the above, please review the following for a possible solution...
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Please review and consider the above and then we can decide what next which might include trying to open
the program directly from the .exe files. (If Windows 7, 8, or 8.1 64 bit, Local Disk C\Program Files\Adobe\
Adobe Premiere Elements 12\ and in the Adobe Premiere Elements 12 Folder are the Adobe Premiere Elements 12.exe
and Adobe Premiere Elements.exe files. Double click the Adobe Premiere Elements .exe file to try to open the project.)
We will watching for your results.
ATR -
looking to buy an ipad but the only problem is that the printer that i have only prints using a wire. is there a product that i can buy so i can use the same printer??
It might be less hassle to buy a new printer.
List of supported AirPrinters.
http://support.apple.com/kb/HT4356
printing to a non-airprinter from an iPad
To print from the iPad, your going to have to install some more software:
-- install a printer app on the ipad. many printer makers have iPad applications for their printers. Look in the app store
-- install enabling software on a computer which you have connected the printer
For a comprehensive list of links, see Texas Mac Man list:
https://discussions.apple.com/message/21291967#21291967
There are iPad Print Applications supplied by printer manufactures -- usually free. Check for your prineter.
Helper app -- /print n share
Print directly to the widest range of network or WiFi printers available in any app. Alternatively print via your computer to ALL printers including USB & Bluetooth printers. View read and display large PDF, Office & iWork files. Easily transfer & store files from the Cloud or your computer.
https://itunes.apple.com/us/app/print-n-share/id301656026?mt=8
Software for your computer's printer:
Mac and Windows
FingerPrint
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Makes any printer AirPrint® compatible so you can print from an iPad® or iPhone®.
Reportedly works for any router.
http://www.netgear.com/landing/genie/default.aspx -
I have upgraded to Mavericks, iphoto is now saying my version is out dated, everything else is fine this is the only problem. Tried looking for updates etc, to no avail.....any ideas???
Check your version of iPhoto. If it is iPhoto 08 7.1.5 from OSX days it is old and if you want a current version you will need to purchase it on the Apple App store.
Maybe you are looking for
-
why is it that when i upgraded to ios 6, my ipad 2 no longer connects to known networks automatically?
-
Hi friends My client wants when ever a workitem gets in the UWL a email has to notify that a workitem has come. I know that there is a report program RSWUWFML2 and configuration of this report with correct varient you can achieve it. I have followed
-
Reading iMacG5 superdrive discs on g4 powerbook with OS9.2
Hello: I have burnt DVD's and CD-R's using both the Disc Utility and Roxio Toast Lite on the G5 Superdrive. They read in fine on the G5 but when I attempt to read them on my G4 powerbook ( which uses OS9.2 and does not have a built in burner ) the la
-
SQL only ViewObject with WhereClause
I have a sql only viewobject. My query that makes this viewobject contains a where clause to indicate a join. The viewobject works fine but I cannot do the setWhereClause(string) to add on criteria if I want to search the view. It looks like bc4j doe
-
This are the sever log . ejb ref resolution error for remote business interfacetest.session.Hello [Root exception is java.lang.RuntimeException: Could not invoke defineClass!] at com.sun.ejb.EJBUtils.lookupRemote30BusinessObject(EJBUtils.java:35