TS1398 When I choose a network it does not connect

I turn on wifi, then choose a network. I see the ip address and DHCP, then nothing happens. No blanks fill in,no request for password.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Thunderbird often stops 'responding' after a spell check. When I choose wait, it usually does not self correct. What can I do to remedy this? Win7 pro, patch 1

Mozilla Thunderbird often, but not always, stops working during a spell check. It seems more frequent if the spell check is automatic when I hit send, but it happens when I click spell check or even click the underlined miss spelled word. The system will generally not recover when I choose 'wait for the system to respond'. Any advice? Win 7 Pro, service patch 1, automatic windows updates. Norton Security Suite.

I disabled out going scans and sent a number of messages with out problem. Norton re-engaged the out bound scan, and still no problem. I'm not sure if this was the issue. It is hard to tell with intermittent issues. Any other suggestions?

HT1695 In case any Wi-FI is available and if I choose not to join wi-fi, on iPhone 5 it does not connect to my 3G cellular data network but it connects to 2G data network forcing me to lower speeds in Wi-Fi enabled ares

In case any Wi-FI is available and if I choose not to join wi-fi, on iPhone 5 it does not connect to my 3G cellular data network but it connects to 2G data network forcing me to lower speeds in Wi-Fi enabled areas.

This might help
http://support.apple.com/kb/ht3406

My macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does

my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on

Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9

Why is it that when I text pictures, the recipient does not receive them. I've noticed that I have a camera roll which is where I choose pics from, but nothing in Photo Stream. Can someone please let me know what the issue might be? Thank you!

Why is it that when I text pictures, the recipient does not receive them. I've noticed that I have a camera roll which is where I choose pics from, but nothing in Photo Stream. Can someone please let me know what the issue might be? Thank you!

Some phones can only send and recieve SMS messages. If the recipients phone doesn't support MMS they won't be able to recieve a text with a photo.
To get your photos in Photo Stream, you'll need to setup iCloud. Check out this Apple article for more info -> iCloud: Photo Stream FAQ

When i am out of wi fi area (disconnected), my iPhone 5S does not connect to cellular. Everytime i need to manually do the setting.

when i am out of wi fi area (disconnected), my iPhone 5S does not connect to cellular. Everytime i need to manually do the setting.

Hello, Arkh_tyi.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection. The second article cover the recommended settings for current Wi-Fi access points.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

Xbox 360 does not connect to Airport Express wireless network

I'm at my wits ends. I got a my son a wireless adapter for Christmas and for the life of me cannot get it to work. We have looked at all the discussion forums on the internet and did A LOT of trial and error and still to connection. On one occasion the xbox 360 wireless adapter saw the network and once it tried to connect is dropped.
I have a Wii, two windows PC's, a printer and a PowerMac all connected to my wireless router. The xbox and the Airport Express both have the latest firm ware update.
These are some of the things I have noticed and tested:
1. Connection is Cable Modem>Vonage Router>Airport Express....wireless to Xbox360
2. I have taken the vonage router out to go
Cable Modem>Airport Express...wireless to Xbox360 and still no luck.
3. I was suspecting a double NAT and contacted Comcast to see if I could put the cable modem in bridge mode and they couldn't help me.
4. The network is open (no security)
5. The wireless adapter is a steady red...then when I tell it to find the network it drops out (LED turns off)
6. I have tried to see if I have a double NAT but tracing in the network utility does not show anything.
7. I have tried to place the Airport express in bridge mode and when I updated, it doesn't not come back up and I have to do a hard reset to communicate to it again.
8. There was one instance when the wireless adapter LED was green for about 15 secs and when we tried to connect it dropped out completely (no LED light).
9. I know it works because in the various forums I have read that people have it working.
I called xbox support and they were not very helpful...wouldn't even search similar cases...I have tried everything I could think of and I'm lost any assistance is appreciated.
Victor

Tesserax,
What is the make/model of the Comcast-provided modem? How about the Vonage router? Is this router also wireless? Finally, I assume that prior to introducing the AirPort Express Base Station (AX), the modem & Vonage router were working properly ... correct?
Thanks for your interest in helping me. To answer your questions:
1. The comcast make and model for the cable modem is Scientific American Model#DPX2203
2. The vonage router is ethernet hard wired connected between the cable modem and the apple express wireless route. The vonage router is model#VDV21-VD
3. With the exception of the wireless connection between the Xbox 360 and AX; everything works fine.
4. The AX is running Apple firm ware 6.3
In the discussion I have read of similar problems and have tried them all to no avail. I'm sure the is a fix to this problem because of people in the discussion groups have had the same issues. I don't suspect the wireless router because it has a steady red light and only turns off when we do the network test or scan for networks.
Victor

I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

Your phrasing is not clear. How do you reboot into Mac OS? /can you describe the process step by step?
Usually, you should do like this:
- while in win, restart
- immediately after chime, press option or alt key
- wait for 2-3 seconds, you should see the boot options
- select Mac OS partition
If you have performed all these steps, and, after choosing Mac OS partition, you cannot boot into Mac OS, then your system is corrupt and should be reinstalled.

When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box,

# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

When I wake my iMac from sleep, the wireless does not connect. I have to shut shutdown and then restart and then it connects. I am running Lion 10.7.3 Any thoughts?

When I wake my iMac from sleep, the wireless does not connect. I have to shut shutdown and then restart and then it connects. I am running Lion 10.7.3 Any thoughts?

Been waiting along time for this problem to be fixed. Unfortunately the update hasn't help at all and even made the situation worse. Now my airplay connection from iMac to stereo abruptly stops after about 10-15 min. so I have to go over and quit wifi, start it up and find my airport network. Not sure why it always has a problem with the apple airport network. My neighbor's pc network is always there.

TS1398 iPhone 4 does not connect automatically and does not remember wifi password

After being idle for a while, my iPhone 4 goes off wifi and when I am connecting manully, the phone does not remember the wifi password. I have a iPhone 3 and 5 where this is not a problem. Can this be linkes to the phone company you use? The iPhone 4 has a different phone company than the other phones. Can anyone help please?

Hi Damien,
Thanks for your reply.
I had not created 2 separated wireless network. The airport extreme has had create wireless allowing it to be extended and the airport express has had it to extend since day 1.
The only device that does not connect to the airport express when it is far from the airport extreme here is the iPhone 4. I've tested 2 Windows based computers, 2 Macs, 1 Samsung TV and 1 Android phone and they all are able to connect to the airport express when the signal from the airport extreme is weak (please take a look on the screen shots on the original post).
The screenshots of the 2 devices' wireless set up can be found below:
Airport Extreme
Airport Express
I have seen other people here on the Apple discussions complaining about the same issue with their iPhone 4 and iPad: would it be a iOs problem?
Regards
Gilson

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

TS1398 When I choose a network it does not connect

Similar Messages

Maybe you are looking for