TS1398 when it shows the names to connect to for wifi what password are they asking for?

What password do they ask for to hook up to wifi in the house?

It is asking for the password for the wireless network. If you have not changed the settings for your router you may have been supplied with a default password on a card or booklet that came with it. If it is not you're network you may have to ask the owner for a password. If you changed the password when setting up your wireless router, you will need to remember or find it if you wrote it down.

Similar Messages

When setting up yahoo e mail what info are they asking for in the description block

When setting up Yahoo e mail on i pad2 what information are they asking for in the description block

It's just a name/description so that you can identify the account in the Mail app. If you have more than one email account set up on the iPad, then that is the name that appears and which you select when switching between them - so it just needs to be something so that you can identify which email account it is so that you know which one it is that you are selecting/viewing

HT1711 Can I no longer just type in the name of a band to see what songs are available by that artist?! If so, where do I do that at?

Can I no longer just type in the name of an artist to se what songs are available by them? And if so, where do I so that?

There should be a search box at the top right of your iTunes e.g.

When publishing imovie to you tube password doesn't work which password are they asking for you tube or apple

I've done this before and it has worked, but now it's not working.

Youtube. Apple ID has nothing to do with publication on Youtube.

I created a signature ID and customized the signature; however, when I go to sign it only shows the name layout or graphic image? How do I go back to using the certificate?

Dear Forum
I was using Adobe version XI and the signature feature disappeared from the menu. Now I downloaded Acrobat Reader DC. Using the menu and instructions I created a signature ID and customized the signature; however, when I go to sign a document it only shows the name layout or graphic image? How do I go back to using the certificate that I created?
Any help would be greatly appreciated.
Regards
Carlos

Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content?

HT1338 My Mac keeps Looking for Networks? The ICON in menu when clicked shows the WI- FI (in gray) ON then goes to Looking for Network again. Shutting down the connection.

My MAC keeps looking for networks? The ICON in menu bar when clicked shows the WI-FI (in grey) it keeps shuting off and disconnecting. Any Ideas???

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Reinstall OS X.

When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice. I'm sure it's a simple setting issue. Any thoughts ???

When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice. I'm sure it's a simple setting issue. Any thoughts ???

have the same issue on my 9630 after upgrading to 624 version. It momentarily shows the previously callers information before showing the new caller's info.

On OS 5, the contacts with international format do not show the names when they call me. any idea why?

I have updated my Iphone 4 software to OS5, and since then the names of the people who call me stopped to appear and only their number is showing. after checking, i found out that the contatcs whom local phone number is saved in an international format are affected by this problem. if i save them without the country code, then their names appear.
Also, some non local numbers that are saved in the format of 00966--------- instead of +966 ------- are also not showing the name of my contact when they call me.
any idea about this knowing that the older OS version didn't have an issue with this?
Thanks

This is the same problem I have. I thought it was my phone only, but now I realize it is a common thing. I hope they release a fix to this, as they did in 2007 & 2007 when 3G was released. Will be waiting and good luck to us all.

When i am installing software and shows the sign of connect phone to i tunes when connect it shutdown and never again help me about this

when i am installing software on my iphone 3g after sometime it shows the it shows the sign to connect iphone to itunes on my window when i am connect it shutdown and never on again ples help me about this problem i am worried.
thanx

Hello Aamir,
It sounds like at this point your phone will not turn on. I would like to recommend the troubleshooting from this article named:
iPhone: Hardware Troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

My ipod touch 4th gen shows that it is connected to a wifi network but when i try to browse safari it doesnt work.please help me out.

My ipod touch 4th gen shows that it is connected to a wifi network but when i try to browse safari it doesnt work.please help me out.
I am using wifi from a mobile by using the tethering option.

Hi there amalrockzz,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Additional Information
Find information on connecting to a Wi-Fi network.
Some third-party routers may not be compatible with all iOS devices, even after updating to the latest firmware. If your iOS devices can successfully connect to other Wi-Fi networks, contact your router's manufacturer to ensure that your router is compatible with your iOS device.
See recommended settings for configuring your Wi-Fi router for use with iOS devices.
-Griff W.

I have an I phone 4s and I have many contacts in my phone. However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number. I have checked every setting I can think of ?

I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??

If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed.

N8 not showing the name of the contact calling

Hi All,
I have seen a strange issue with N8. I have never experienced this with any other Nokia phones that I have been using. Not sure if others have noticed it. Here is what I have experienced:
At times, I have seen that when I receive a call from the person who is already added in my contact list, the phone is just displaying the number and not the name of the person. When I check the Log, it also displays the number and not the name of the person.
Just so that someone might have a question, I have imported my contact list from my previous handset (Nokia N70) where it worked absolutely fine.
If someone has experienced the same kind of issue, could you please explain me and help me resolve it. It is quite inconvenient to identify the caller without the name and decide whether to accept or reject during work hours and have at times missed some important calls due to that.
Thanks,
manishk1403

Just so you know, guys, you're not the only ones with this issue. It suddenly popped up a week or so ago when I ran the PR 1.2 update OTA. And as to the comment about duplicate contacts, my phone used to show the name that was alphabetically first amongst the duplicates sharing the same number.
Nokia, you've made one the best devices thus far in the N8, and I feel like I can say that because I've used Nokia devices since the 3310, and am a diehard fan in every respect. But the issues I've had on the N8 are totally unbelievable. I still use a 7610 and I find it more reliable than the N8. Also, it's surprising to see how caustic your support team replies are to genuine problems your users are having with their phones, which are UNDOUBTEDLY a result of improperly thought out firmware upgrades and plain lack of user-friendliness. Nokia seems very happy to place the blame on the user, that is, provided they reply in the first place. And as to the solution above, the one that the operator at Nokia support recommended, is just plain idiotic. What exactly is the point of OTA upgrades if one has to perform it by cable anyways? And resetting the phone? Do I have to do it everytime I install something on my phone? Is that the solution to every problem on this great device? I mean, come ON Nokia. I gave up an iPhone 4 for this. Please try not to make me, and millions of others who have done the same thing regret our decision. We're not asking you to perform rocket science on clay tableta or a feat of some improbable technological wonder. We're asking you for things that are ALREADY there for AGES on other phones, and a little bit of consideration that I feel we've all earned. I honestly didnt mean for this to turn into a rant, but this is truly the first time ever that I've had such a troublesome device from Nokia, and witnessed such scathing indifference to user troubles, despite being squarely at fault with respect to buggy and incomplete firmware.

I update my iPhone in iTunes, and after some time, opened a window saying "rosolvendor conflict" and asking me to choose, giving me two options, showing the name of a friend who also has an iPhone. Can anyone help me?

I update my iPhone in iTunes, and after some time, opened a window saying "rosolvendor conflict" and asking me to choose, giving me two options, showing the name of a friend who also has an iPhone.
Can anyone help me?

Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now.

Briefing Book Title shows the name of the Analysis along with Report Name

Hi,
When I add a report to the briefing books, The title of the PDF document shows the report name and below that it also shows the name of the analysis. Normally we save our analysis with some standard naming conventions having some special characters. Client does not need that name in the PDF.
How can I stop the Analysis Name to appear on the briefing book?
Please suggest.
Thanks
Gaurav A.

That's a great question, and it seems like something that should be standard with iCal.
The only thing I could think of would be to add the patient as an invitee, but that still wouldn't solve the problem of having their name be the title of the appointment. But the auto-complete function is there.
The other option (which is more convoluded) would be to use Filemaker Pro. It is extremely powerful and customizable and there are plenty of people out there who know how to develop for it. This option would be more expensive, but it could also be custom-tailored to your needs.
Those aren't great answers so I'm interested to see what others say. I'd like to implement it into my own iCal app.

New message address shows the Name but not full email address

The email To: will show the name eg John Doe but not the full description [email protected] If I click on the tab by the name I will see the full email address referenced. If mail sees just the name it sometimes says John Doe does not appear to be a valid email. If I send an email to myself at other email accts I have (aol for example) the mail does arrive. I think this may be related to address book but not sure. If I enter a new email in the TO in a new message It keeps the entire email address, I think. Anyway just want some feedback about this since thee is a degree of uncertainty here

mail will indeed draw from address book's contacts. if you have in mail>preferences>viewing the option "use smart addresses" checked, then the name of the contact will be displayed in the to/from... fields and you can see the full email address when selecting the tab next to the name. so that is normal behavior. if you enter a new email address for which you do not have a contact card created in address book, then that will remain as an email address in the field you entered it to. you would have to create a card in address book, add that email address, and then the name of the contact would appear in an email field rather than only the email address.
hope this helps

TS1398 when it shows the names to connect to for wifi what password are they asking for?

Similar Messages

Maybe you are looking for