TS1398 Why isn't my wifi ever connecting with iOS6?

Ever since, i upgraded my phone to iOS6 i've honestly had nothing but problems with connecting to wifi. My school has really bad service, so I usually just turn off my cellular data to use the wifi... but ever since the update I literally can't do anything. it *****. how do I get it goin again?

Hi Lozza,
Does the iPad still connect to the internet even though the bars arent showing?
When you say they arent showing, do you mean only one bar is showing? Or only 2 bars? Or no bars at all?
How far away from the router are you?
Are other devices working ok on the network?
Have you reset the iPad?
Joe

Similar Messages

  • Why won't my wifi stay connected with lion

    I recently installed lion on my imac.  Why won't my wifi stay connected after I shut it down

    This has been well discussed on another thread here: https://discussions.apple.com/thread/3191630?start=2055&tstart=0
    (There appear to be no moderators on these forums to make sure that new threads with the same topic don't get linked to a parent !?)
    Anyway... The issues appear for many to be related to a specific Airport card type & firmware version.
    I've had constant disconnect problems with my Mini since upgrading to Lion.
    My Airport card specs are:
      Card Type:                              AirPort Extreme  (0x168C, 0x86)
      Firmware Version:                    Atheros 5424: 2.1.14.9
    Connecting to my Time Capsule distributing on:
              PHY Mode:          802.11a
    The Atheros firmware version appears to be the issue depending on certain wifi network conditions.
    After some playing about today I think I've managed to force my Mini to connect on a better frequency, without having to roll back the firmware to the Snow Leopard version or mess with the Mini Airport card settings (via Terminal) by changing some settings in my router (Time Capsule).
    These are the changes I made:
    Airport Utility > Wireless > Wireless Options
    Set Radio Mode to 802.11 a/n - b/g instead of 802.11 a/n - b/g/n (Automatic)
    Set 2.4 GHz Channel to 13 instead of Automatic
    Set 5GHz Channel to 48 instead of Automatic
    My Mini now connects on:
    PHY Mode:          802.11g
    Signal / Noise:          -64 dBm / -96 dBm
    Transmit Rate:          54
    instead of previously
    PHY Mode:          802.11a
    Signal / Noise: -73 dBm / -96 dBm
    Transmit Rate: 36
    This appears now to be stable (no drops in the last 4 hours). It's a low transmit rate still, but better than before.
    The iMac is still connecting on
    PHY Mode:          802.11n
    Signal / Noise:          -69 dBm / -88 dBm
    Transmit Rate:          216
    and all is right with the world (hopefully for the long term)

  • Why isn't my wifi connecting over a secure network? I typed the password in correctly, but it won't seem to connect.

    Why isn't my wifi connecting over a secure network? I typed the password in correctly, but it won't seem to connect.

    Tap Settings / Wi-Fi. Tap the blue circle with an arrow to the right of your network then tap: Forget This Network.
    Restart the iPad. Tap Settings / Wi-Fi. Tap the network name again then type in your password.
    If that didn't help, try here >  Apple - Support - iPad - Wi-Fi Assistant
    And try turning off your router for 5 minutes, then turn it back on. Try typing in the password again.

  • Why will my I phone not connect with my IMac it pairs?

    Why will my I Phone not connect with my IMAC it pairs?

    Since you use the work "pairs", I must assume you're talking about bluetooth.
    Unless you're trying to use the personal hotspot to tether the computer to the phone, you can't do that...
    You can only use bluetooth with a computer for tethering.  Bluetooth file sharing is not supported. Neither is bluetooth sync.

  • Why has my iphone has stopped connecting with itunes?

    why has my iphone has stopped connecting with itunes?

    You can try resetting your iPad and iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • Why has my ipad mini stopped connecting with my iPhone 4S? I used to use it to download books, or transfer emails to my ipad mini. It was fine 3 days ago, now I get a message saying " cannot join with iPhone" Any help greatly appreciated.

    Why has my ipad mini stopped connecting with my iPhone 4S? I used to use it to download books, or transfer emails to my ipad mini. It was fine 3 days ago, now I get a message saying " cannot join with iPhone" Any help greatly appreciated.

    You can try resetting your iPad and iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • TS1398 Why I lost my wifi connection during i make a phone call ?

    Why I lost my wifi connection during i make a phone call ?

    If this is a cordless phone that you are taliking about, it is operating on the same frequency as your wireless network, and the phone is creating issues. Unfortunately, this is a common problem.
    A potential solution might be to move the phone as far away as possible from the AirPort Extreme and your computers, or changing the channel on your AirPort Extreme to try to find more clear airspace.
    In my case, I had to go out and find new phones that operated at higher frequencies to solve the issue that I was experiencing.

  • Why isn't there an iTunes Connection Queue?

    It's been about 2 hours for me trying to connect and reconnect to iTunes for the final step in my 2.0 update. I understand that there is a huge volume of people trying to do the same thing which is causing the server overload, but why isn't there a queue so that we can at least wait in line?
    **** Poor Planning = **** Poor Performance

    A line?! Instead of a 2 hour wait, you'd be looking at a 2 day wait if that was the case.

  • WiFi says I need a password but there isn't one when I connect with my phone

    The title says it all. I'm trying to connect to McDonald's public WiFi and when I connect with my phone, it works normally, but when I try to connect with my Mac, it says that either the connection has timed out or I entered the wrong password.
    I'm running OS X 10.7.4 Lion.

    I've never actually managed to connect to the network, it automatically disconnected and reconnected to my usual one.

  • How to get Xfinity WIFI to connect with Droid Razor

    Since my Droid web browsing ability became  basically non functional w/ in the past couple of weeks for no apparent reason, I decided to
    try to connect to home Xfinity WIFI.  I use the WPS PIN from my XFINITY router for many devices w/ no problem.  My droid displays my home WIFI  as "HOME6c6c secured w/ wpa/wpa2 (WPS Available).'  I enter my XFINITY WPS PIN, when prompted on my droid, but I receive an error message.  Is there a setting to change to WPS on the DROID?  Any help is appreciated.   Is there a known problem w/ XFINITY / VERIZON Droid compatibility?

    While I don't have the Razor, I use Comcast Xfinity and wifi to connect our Android and iPhones without an issue.
    When you go into settings for wifi, before selecting any specific connection, tap the settings, and there you should see some options for WPS settings. 
    For advanced settings, select Show advanced options (enabled when a check mark is present).
    Ensure additional settings (e.g. WPS, Proxy settings, IP Settings, etc.) are configured appropriately (if applicable) then selectSave.
    (Taken from : http://support.verizonwireless.com/support/devices/knowledge_base.html/49570 )
    Hope this helps.

  • Bug in wifi/wireless connection with captive portal in UK/London ?

    With my macbook pro (10.6.4) & iphone (iOS 4), I do not manage to have an easy connect on free wifi captive portals in London. They all are new connections (unknown networks before).
    * dhcpd lease seems to be instable. I can get wifi connection (with good wifi signal strength) but most of the time get a "non-allocated" lease like 169.254.57.x/24 without any router/dns. A few rare times, the dhcp server give a me a complete ip connection.
    * in the rare case where IP connection could established, I was not redirected to the captive portal. I had to manually enter its address (in my case <IP>:8000, you need to guess) and even after authentication, I can't browse the Internet. In one of my test, I managed to resolve dns entry but can't browse the web.
    I tried during an hour and I couldn't make it on work on my Macbook. work a small time with the iPhone.
    tested in McDo free wifi and Airbox Public Wifi of EasyHotel (Airbox system). also have problem with "Wifi Zone - The Cloud".
    ok in Starbucks and in St Pancras Free Wifi.
    Found these threads which could be related but no real solutions:
    http://discussions.apple.com/thread.jspa?messageID=11875166&#11875166
    This is probably the router's fault but I can't check this.

    Hmm...pretty interesting. What redirection mode did you use for m0n0wall? (http or dns) Have you tried disabling the NAT on the router as well as unchecking the block anonymous internet requests on the security tab?
    I have a similar setup on a T1----media converter----WRT54G setup. Basically, the router was able to get public wan ip addresses on the status page. So do the computers behind it (wired and wireless) but they aren't online. We pinged the three dns numbers on the router, only 1 replied. Now, the ISP has Cisco all-access installed on the converter (quite similar to captive portal) and it shows up on every computer when we try to go online. We open up the browser, it prompts for the authentication. We fill-in the details but still it doesn't go online. Bottom line was we cloned the mac of the main computer and they didn't need to authenticate...but then again it defeats the purpose of the software.
    Also, the router was set as a DHCP server with NAT enabled. I'm thinking that the router's firewall still blocks your computers even when it's already set as a switch. Try to disable the NAT and see if it works.

  • Why is my mac is not connecting with the wireless keyboard

    For two days my iMac hasn't been connecting with the keyboard, I changed the batteries for the keyboard but it's still to working. Any suggestions?

    If you're using IP addresses in the 192.168.x.x range they are not information that anyone here can use to "get at" your machines. So, please reply with the following information from one of your devices that works, and then it will be clear what IP addressing scheme you have that the mini needs to fit into:
    ip address
    subnet mask
    default gateway
    DNS server
    DHCP server
    if your access to the internet is via a router/gateway, those devices usually have a web interface for administration. It would be helpful to use it to find out the range of IP addresses that are being used for DHCP. Using the exact same IP configuration on one machine that another already uses causes IP address conflicts, and the last machine to try to use the conflicting address will have its address disabled, so that's why the last thing you tried didn't work.

  • Imac cannot connect to with wifi, cannot connect with ethernet

    Just purchased this imac last night, and immediatly unable to connect to wifi, very discouraging.
    Each time I try to connect to my network with my imac, I recieve error messages "unable to connect" However, I am still able to connect with my macbook pro, and iphone 3gs.
    I have tried cycling whole system, unplugging imac, resetting p-ram, resetting modems, and even tried plugging in ethernet directly into imac and turning off wifi but no luck.
    its a 27" imac, 3.4 intel i7 8gb ram Lion 10.7

    Go to the Lion forum https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons#/?tagSet=1383 and then click Refine This List and then Getting Online and Networking. You can be reading there while you wait for AppleCare to open.

  • HT1369 why is my ipod can not connect with the i tunes store and can not sync

    Dear apple,
    Please kindly help me because my ipod can not connect with the i tunes store and can not sync either

    Follow through: iTunes for Windows: Device Connectivity Tests
    That link, also contains other links that may be related to your problem and/or to your solution.
    Hope this helps.

  • Why won't safari won't connect with iphoto?

    I tried to iphoto. It opens but icon spins in center of screen. Tried to download and save a photo from FaceBook and it says safari cannot connect with iphoto. What is wrong?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

Maybe you are looking for

  • Penultimate labels

    It seems to me now that pop labels are only sent for directly connected network prefixes, and not for other learnt prefixes but outside the mpls cloud. For these other prefixes, the edge LSR uses the untagged label. Is there a way to configure, such

  • UDF and Category mapping table name?

    Hi I have created UDF on the screen and categorized these UDF for the user convenient. Now i would like to know the table where the system store this mapping. Here i am attaching the mapping screen which table i needed. Kindly refer the screen shot i

  • Playing dvd's on a dvd player

    I have some home movies that I have moved from my I phone to the mac. I have tried to burn them to disc but the disc will not play in my dvd player. What do I need to do?

  • Vim --with-x=yes

    Just wondering if anyone else ran into a problem with the latest version of vim, where you can no longer paste into vim from the X clipboard. I got so used to selecting text from anywhere and everywhere (OpenOffice, Firefox, any other X app), and pas

  • Constant switching to FINDER after last update

    Every since I did the suggested updates last week for my Mac laptop 1.42 GHz PowerPC G4 with System X (version 10.4.11) I've had a problem with the computer automatically switching from whatever software I'm using and switching to the FINDER. While I