TS1398 wifi connected but no internet in iphone5!

Hi,
In my iPhnoe5 i'm already connected to wifi, but the wireless icon doesnt appear on the top of the screen eithre cannot access the internet!
I tried every solution in the troubleshooting section but no success.
thanks,

If you have tried every solution you must have a hardware problem. As the phone is in warranty take it to an Apple store for replacement.
Before you do that, and if the problem is only with your home network and the phone works on other WiFi networks, you might want to try rebooting your router by removing all power from it for 15 seconds or so. And if that doesn't resolve it try changing channels on the router. And check the router's settings for MAC filtering. If it is enabled your phone's WiFi address must be listed on the "allowed" settings. Also check if your router has a limit to the number of devices that can connect simultaneously.
The way to identify router issues: After attempting to connect go to Settings/WiFi and tap the ">" to the right of the network name. If the IP address begins 169.254 this means that your router is not responding to the phone, so you need to troubleshoot the router (even if other devices connect and work).

Similar Messages

  • I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    This is possible to be connected to WiFi but not internet.
    You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
    Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
    Then make sure that your modem/router is connected to the internet.
    You can try any other device, lights on the modem/router or use Eth cable to test.
    Report back your findings.

  • I have wifi connection, but my internet is very slow

    I have wifi connection, but my internet is very slow

    try switching off photo stream in System Preferences > iCloud
    This seems to throttle the internet connection and when I switched it off, it fixed my issues instantly!

  • Ipad2 has wifi connection but the internet doesn't work

    I use my ipad2 at home with the wifi. I have nothing changed but now the internet doesn't work. The ipad shows me the wifi connection but i cannot receive email and the safari doesen't work too.

    This Apple doc may help:
    iOS: Troubleshooting Wi-Fi networks and connections
    ...Found via this page:
    http://www.apple.com/support/ipad/

  • Wifi connected but no internet

    All of a sudden i was watching hulu and it went to 'there is no java enabled for the ads' than i refreshed and tried to to go google and no connection, my laptop was connected at the same time with no issues. I restarted and still it connects but no internet. Its not the internet its self as my other devices are connected find all of a sudden this happened on my mac mini.

    Are yoi teaaly on 10.4.3 on that Mac???
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Blackberry torch 9800 wifi connected but no internet

    hi i am using blackbery torch 9800.its giving error that wifi is connected but no internet connection.please help me

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support and to ensure that you are subscribed to a data plan from them that is adequate to use the services you desire (many services require a data plan, even if the method of access is only WiFi).
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Airport Extreme-have wifi connection but no internet on some devices???

    I just replaced my linksys router with the latest (tower) Airport Extreme and an Airport Express as an extention of the network.  Now I had a heak of a tme setting this up to mimic what the linksys did so I would have a smooth transition.  I have a windows server 2008 R2 server which is my file server, DHCP & DNS server.  I set my Extreme with the "DHCP & NAT" set the range I use which is 10.0.0.10 - .253, Set the router's address to 10.0.0.10 in network properties as well as setting the default host to point back to my server at 10.0.0.100.  I also checked "Enable NAT port mapping protocol".  Everthing seems to be working great most of the time...my wired PC's have internet and their proper IP addresses, my iMac and MacBook Pro have internet and proper IP addresses, iPad, iPhones...BUT I am noticing on my iPhone 5 that I'll show a full wifi signal but no IP address there for no internet.  Now this happened a couple times and the only way I got it back was to do a rest of the phone.  I have never had any wifi issues with this prior to installing the Extreme and Express.  So I thought it was just the iPhone but my iPad just behaved the same way and a rest took care of it.  Worse at the same time I checked my MacBook and I have the exlimation point over the wifi in the top tool bar.  I can see and pick my SSID but couldn't get an IP address until I clicked the Airport Utility then it connected.
    So basically I am looking for any suggestions or better yet fixes on my issues.  I'm not sure if I have the Airport Extreme configured properly for it to work with the Windows 2008 Server.
    I appreciate any help at all!
    Thank you greatly in advance,
    Dave

    And when is apple going to put a NAT only mode on the Extreme????
    Apple have a policy of not telling.. you can ask .. but they don't tell.
    I am a rather recent arrival on the Mac/Apple seen so I would also wonder how an OSX server is setup with AE..
    For wireless in particular, you can use Enterprise level security.. and that might fix it... because instead of using a preset key, as standard in wireless you can use a username and password combo from a radius server.. which might then be used to pass IP via dhcp. Something to consider if you don't mind getting a bit more complex..
    Look at this thread which is looking at using ox x server which is basically the same issue you are having.
    https://discussions.apple.com/thread/2756247?start=0&tstart=0
    The idea of using a static range of IP addresses.. that might work.. with DHCP actually turned off.. I have used this setup for something completely different.. ie to pass different DNS to clients that need access to Netflix from overseas.. I did not explore it from a your no dhcp setup.. but that is another option to try.. there is so little info supplied it is hard to know and you just have to trial and error with it.
    Here is another interesting post
    http://www.youtube.com/watch?v=qyU4vpMljEI
    Clearly other people are hitting the issue.

  • Nokia Lumia 521 - WiFi connected, but no internet ...

    I have a brand new Lumia 521 on T-Mobile. I set up the wifi connection and it shows connected. However, there is no internet connection. Cannot download any app or anything.
    Trouble Shooting: Rebooted the phone couple of times. Turned on/off wifi. delete/re-connect wifi.
    Reboot wireless router couple of times.
    Turned off the data service on my phone and only wifi is on now. Checked my router that there is an entery for my Windows Phone, but could not get any logs.
    Nothing helped so far...
    Loaded my sim with funds, thinking if something no fund is blocking it somewhere :-D
    Everything is fine on my other smartphones.
    Did I receive a faulty device?
    Solved!
    Go to Solution.

    At least you have 8.1. Those of us with 521 not updated yet, no real answers. Someone at Nokia going to close thread cuz no one posting. What to post, you should've been a politician with the no answer answer. Whole experience makes me rethink Microsoft and Nokia altogether. Both companies I used to believe in and support. Even word and excel don't sync well from phone to desktop. Backup for what? Only if you reset phone. That is backup even DOS using command lines would have been ashamed of (honestly so long ago don't remember if it had backup but I know my 386SX did) Pictures duplicate, triplicate and repopulate after deleted and I have backup to cloud turned off. seems Microsoft thinks differently than I about this issue? It continues to bring back a pic of EX that i hate...Great reminder!!!!. Phone storage eaten and not accessible to delete. Not allowed to delete certain apps that came with phone. Now I delete apps I prefer and no space becomes available? Do not use Nokia cinemagraph. Can't be viewed anywhere but on phone without converting. And what phone/camera has no flash? My parents old 110 (I think) at least had a cube. Poloroid built in...just saying that was the early 80s. Now lock screen and theme (ugly muted colors, btw) not working, can't get space back even when hooked to desktop, use cloud 6 now to keep phone and cloud from changing between app and desktop, have to convert all Nokia files, and most apps not available from what I can gather because Microsoft limits us. Nokia and Microsoft, get your acts together before marketing with one another. And, have answers to these questions. If you can't do it right, don't do it all. Maybe best to walk away from one another. Although, other than poor apps and flimsy phone, I am more disappointed in a guru conglomerate that doesn't care about the user. You keep trying to catch up with Mac and Droid...not at this rate. Excel fave program to use and love outlook. But this is crap on a stick, SOS and plain junk. And, the mighty do fall. I remember original Apple having market, commodore 64 and Tandy? Two of the three no longer exist. IBM was a typewriter back then, as far as I was aware. For Nokia, Here doesn't usually get me to correct place with full addy and zip entered) Not a good platform or flimsy phone. Can't wait to go back to Droid....so, I suggest every time I can't find an answer from one of your sites, you stop asking what I think. Here it is. And, I could keep going and going....atop asking if you don't give a hoot.. and, I'm sure this will never be posted cuz Microsoft determines what I can and can't do with this thing

  • IMac OSX Maverick Wifi connected, but no Internet

    Hello Mac community. I am in dire need of a resolution on this wifi connection problem. I've tried most resolutions posted here on apple support community.
    I've tried:
    1: Resetting PRAM & SMC
    2: Deleting SystemConfiguration
    3: Deleting passwords off Keychain for wifi
    4: Creating new wifi location under Safe Mode
    I know my DHCP is fine. When I see my wifi connected, I can see my DCHP IP address connected under Advanced in Network Preferences when I check my connected wifi.
    Strangely enough, I'm able to surf the internet after 10 minutes when I leave my computer enough. However, the internet cuts off and I'm back to no internet, but the wifi says I'm still connected.
    There is another solution In that I turn off bluetooth, but I'm using a magic mouse and bluetooth keyboard. I can't risk turning it off and not be able to use those devices.

    Troubleshooting steps here:
    http://support.apple.com/kb/ts1398

  • Wifi connected but no internet for a minute

    Since last update for Yosemite 10.10.3 ,  whenever my MacBook pro early 2013 goes to sleep, the wifi disconnects and it can take up to a minute to reconnect when it wakes.
    As soon as it wakes I have no internet connection, the WiFi indicator is on, as if connected, but in fact there is no internet for some time, usually between 30 secs to a minute.
    many times i need to disconnect and reconnect the wifi, in hopes it works faster
    This is happening using 5 different wireless systems ,including apple and cisco products, at home friends and office
    Any ideas what to do?

    What does Wireless Diagnostics show?
    Wireless Diagnostics
    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wi-Fi Problems in OS X Yosemite (3)
    WiFi Potential Temporary fix - Yosemite
    Also try turning off Bluetooth.

  • Have wifi connection but no internet?

    I have an Airport Extreme (version 7.6.4) in bridge mode as main network, this is connected via ethernet to an ADSL router (this allocates the ip addresses)
    I then have 3 airport express extending teh network to improve the signal in different parts of the house. All the ip addresses are 10.0.0.x.
    I have internet connectivity on my iMac (10.8.5)  connected to the wifi network, however my Macbook Pro (also 10.8.5) and all my iOS devices (iphone 4s on iOS 6.1.2 and ipad 2 iOS 7.0.3) whilst having strong wifi connection do not have an internet connection. When I launch AirPort utility on the macbook pro and iOS devices it shows the network but the internet reflects as disconected, whereas on the iMac the internet is connected.
    Any ideas what is causing this?

    I have an Airport Extreme (version 7.6.4) in bridge mode as main network, this is connected via ethernet to an ADSL router (this allocates the ip addresses)
    Since you have a router "upstream" from the AirPort Extreme, the Bridge Mode setting on the AirPort Extreme is the correct setting.
    As you know, when the AirPort Extreme is set to "create a wireless network", the AirPort can be setup either in Router Mode or Bridge Mode.
    This avoids a situation where you have two routers on the same network, with both of them are trying to provide DHCP and NAT services.  Conflicts would be certain with two routers competing against each other.
    I then have 3 airport express extending teh network to improve the signal in different parts of the house. All the ip addresses are 10.0.0.x.
    Can you clarify whether the Expresses are "extending" the network wirelessly?  If they are, then they are already in the correct Bridge Mode setting.
    Or, are the Expresses "extending" by connecting back to the AriPort Extreme using wired Ethernet connections?
    We need to do some more troubleshooting starting with one Express at a time.....but first need to understand how you have the Expresses connecting to the AirPort Extreme.
    We assume that each Express is either the A1264 version or the current A1392 version. Is that correct?

  • I have WiFi connection but no internet access HELP

    I got the ipod touch 3rd generation two days ago at yesterday it was connecting fine but now when i try to connect it shows that i have good WiFi signal but no actual internet connection because when i try to load app world or Safari it wont let me. I have reset my router several times and reset my network settings on my ipod but still nothing. My computer and laptop are both working fine with the internet. However, my sister also has the same ipod and she has the same problem but she resets it once and it works but her ipod has not been updated in a long time and mine has the latest software. HELP ME PLEASE!!!

    You may not really be connected to your WiFi network.
    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (not reset -  to restart remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages. Check for a firmware update for your router on the manufacturer's support web pages. See the documentation that came with your router on how to install.
    If you need more help please give more details on your network, i.e., your router make, model and version, and how you have it configured.

  • Wifi connected, but no internet until wifi turned off and on...

    hello.
    I just got a new macbook air, 2012. Running mountain lion.
    while connected to the internet via wifi, suddenly the internet disconnects.
    The only solution has been to turn off wifi, and then back on. Then, its fine for a while.
    I thought it was the location where i was connecting.
    But today, i was in another city, on another network, and it did the same thing.
    I turned wifi off, and back on, and it worked fine.
    Do i need to take this machine to the apple store?
    thanks!!

    Are yoi teaaly on 10.4.3 on that Mac???
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Wifi connection but 'No Internet Access'

    We recently had BT fibre optic BB fitted and all seemed well on the day.  However very quickly devices using the wifi started to have only intermittent ‘connection’.  The devices show as having a good/strong signal, yet are often unable to access the internet, and in the case of our lap tops when we can not get online they say ‘Connected’ to the wifi but they also say ‘No Internet Access’.  The iPad minis we have also show as connected, with good signal, but just will not access the internet.
    The issue is intermittent and has no set pattern.  At one point all devices are connected, sometimes one or two aren’t, sometimes none are.  When they will not connect we have to move them into the room where the hub is and wait for them to reconnect.  We are talking about 2 laptops, 2 iPad minis, 2 smart phones and 2 Xbox 360’s, as well as my PC (which is connected via ethernet cable).  So I doubt I'm overworking the hub, especially as my old router worked (just) with this amount of devices and that was on a basic non fibre optic BB.
    When the engineer connected us he set the internet up in the study, which is at one end of our house, as that is where the master phone point and my PC are.  He connected the PC via Ethernet cable and I connected an iPad mini wirelessly (whilst sat next to the hub).  He did not check anything else worked or check if we had coverage in the whole house.  I do have a phone point in the hall, which is in the middle of the house, but he did not offer to connect to this point, or suggest that may offer better coverage in my house. 
    My frustration with this is compounded by the fact I had a basic Netgear wireless router running on a bog standard Virgin Media BB connection, never stronger than about 3 megs, that covered the whole house from exactly the same spot as the Homehub. 
    I have tried adding a plug in signal booster (as suggested on another thread), and that has helped with the overall strength of the signal in the rooms furthest from the hub, but it does not stop this ‘connection’ issue.
    Can someone help with suggestions regards settings on our devices or the hub, I did wonder if it was due to the dual frequencies the hub uses, or regards getting someone out to look at this.  I am at my wits end already, and I have only had BT BB 5 days.
    Thanks in advance.

    From reading your original post, the issue doesn't seem to be wth wireless signal strength - your devices are connected to wireless but just can't make an internet connection, correct?
    In my experience there are a number of reasons why this can happen:
    1. Your device has a fixed IP address and it's on a different subnet from the router.  Are your devices configured for static IP addresses or DHCP?  The BT Home Hubs use 192.168.1.x as the default subnet.  To be honest, it doesn;t sound like this is your problem if they work when moved to a different location, but best to check.
    2. Your hub isn't connected to broadband.  You should be able to see this from the 'b' light on the hub.  Again, doesn;t sound like your problem.
    3. The device connects correctly to the wireles hub but fails to get an IP address.  You can check IP address assignments on the hub itself by pointing your browser at bthomehub.home, going to Advanced Settings and then DHCP Table (this is for a HH3).  You can also check the IP address assignment on your laptops, but I don't know what OS you're using so I can't tell you how to do that.  If the device is failing to get an IP address then I'd try restarting the Hub.
    4. Your devices are connecting to the Hub's BTWiFi network instead of your real network (this happens regularly with my iPhone and iPad).  Force a reconnect to your real network.
    Hope this helps!

  • HELP : 9320 - Wifi connected but no internet

    Could somebody help me to solve this? Thanks
    Solved!
    Go to Solution.

    Hi there,
    When you say that your WiFi is connected, I'm assuming that you mean that the WiFi symbol is white, correct? If so, there are a couple of things to try. First, I'd start off by rebooting your device. To do this, simply remove the battery for 15-30 seconds, reinsert and wait for the device to reboot.
    Once you've done that, if it still doesn't work, go to your WiFi options and delete the connection from your phone. Reboot the phone again using a battery pull and then connect to the WiFi network again. If it still doesn't work, you may need to check your router settings to ensure that your router is giving your BlackBerry access. If you need help with that, please post back with the brand name and model number of your router.
    I hope this info helps!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

Maybe you are looking for

  • Can i use apple tv in kuwait?

    can i use apple tv in kuwait?

  • TestStand Deplyment Error- Error: Unable to locate all subVIs from saved VIs because a subVI is missing

    Hi, I am a Systems and Software Engineer based in Vancouver. I developed an automated test system using LabVIEW 2013 and TestStand 2013 with custom operator interface. I encountered 'missing VIs' problem which is kind of weird because I passed analyz

  • Can't open Sample Music folder or see track in Library

    iPhoto 6.0.6 1. Selected a slideshow from the Source pane. 2. Clicked on the Music icon, on the right side, on lower tool bar. 3. A menu drops down with a Sample Music folder first on the list. Followed by Garage Band and iTunes. Play music during sl

  • Need to fire the validationon only submit

    Hi All, I am using JDeveloper 11.1.1.7.0 I have one form with Cancel button and Submit button.If I click the submit button with wrong values it's need to check logic in baking bean.But if I Clicking submit beore it's going to the bean firing the EO V

  • Brother HL-5170DN

    My faithful Brother 5170DN is giving me trouble on the MacBook Pro. I get multiple pages of: ERROR NAME; syntaxerror COMMAND; OPERAND STACK; 30976 The printer is on the network and works fine with the iMac, also running Tiger 10.4.6. Many thanks! Mac