TS1398 Wifi not responding after the software update. restored the system but still no luck.

After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

I have done the software updates on my laptop but still can't get the app store

Hello,
I am trying to download the app store for my laptop, however, I have done all the system updates (numerous times over the past few months) and the app store has never appeared. I can't seem to find a link to download it from the website and am not sure how I am able to get it on my computer without reinstalling my whole operating system or something (which I really don't want to do if I can avoid it).
Any information on this issue would be greatly apprieciated,
Lauren

You need to purchase and install Mac OS X 10.6 and then update to at least 10.6.6 to get it.
(57985)

I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, etc. Anybody at Apple listening?

I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold, etc. Anybody at Apple listening? Anybody else out there having these kinds of problems?

10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
* and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
Shame on you Apple.
Message was edited by: Sjazbec

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app
- Restore from backup
- Restore to factory daults/new iPod.

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

HT4623 how do you update an ipod touch? Mine does not have the software update under the general tab. thx

how do you update an ipod touch? Mine does not have the software update under the general tab. I would like to back it up to Icloud. Thx

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
To use iCloud you have to have iOS 5 or later.

Hi there I'm trying to update my mac that is on OS X 10.4.11 and nothing is coming up in the software update in the apple menu

Hi there I'm trying to update my mac that is on OS X 10.4.11 and nothing is coming up in the software update in the apple menu

That would be because you have the last version of Tiger. To upgrade you need to purchase a newer version of OS X released since Tiger. They would be:
Leopard (10.5.x);
Snow Leopard (10.6.x);
Lion (10.7.x).
Which one you purchase depends in part on your computer model and installed RAM. Unfortunately, you did not provide any additional information.
Lion is the current version of OS X, but Snow Leopard is still available through Apple's Online Store.

Is there any news about when the software update for the extravert will be available?

Had the phone since November and can't send or receive media messages or go on the internet. Basically there doesn't seem to be enough memory, stripped the phone of all apps, pics,and music to free it up but still say's it full. Getting vague answers from Verizon and L.G of there will be new software soon. On the unlimited plan and can't use everything I'm paying for. Thanks

To supplement the known information about this update, I found a post from LG regarding what this update addresses:
http://www.lgforum.com/forum/boards/carriers/verizon/topics/anyone-know-what-the-software-update-for-the-lg-extravert-did-and-camera-issues
1. Memory issue
2. Fixed touch is wrong behavior
3. Add option to Re_send MMS to failed recipients
4. New PRL 57011
5. Update Opeara mini browser(189 --> 191)
6. Reset when MMS receive after Spanish set
7. Occurred noise to mono headset connect to MP3 play
As far as I can tell, the Camera issue wasn't addressed. It takes awhile for the Trouble Ticket to work it's way through the system, so maybe they didn't get it in time for this update. [...]"

TS1702 I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck.

I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.

What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
 Cheers, Tom

I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post. I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store

Brand New 27" iMac i5 will not boot after installing software updates

I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
Any suggestions? A little frustrated here....

If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
Does this help you at all?

I can't find the software update for the ios5 on air update

Where can I find the software update option for iOS 5 on air update on iPad2. Not able to find it in current settings menu

If it's not available within Settings->General->Update, have patience. The Apple servers in your area don't have it for your region yet.

I have just had a system update a safari 5.1.7 a security update 2012-200 and a app update and now when i go into a site with flash it says i do not have adobe flash. I have installed it but still no luck? any help would be much appreciated Cheers Dave

I have just had a system update. Safari 5.1.7, a security update 2012-200 and Remote app update and now when I go into a site with flash it says I do not have adobe flash. I have installed it from the site but still no luck? any help would be much appreciated Cheers Dave

Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
WebKit built-in PDF

Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
Brian

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

HT1414 My ipad is non responsive to touch. I have tried updated the software and restoring the device to factory setting and it still does not respond.

My ipad2 is non responsive to touch. I have updated the software using ITunes and have restored the device to factory setting and it still does not resonse. Has anyone had this problem? What do you suggest?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

TS1398 Wifi not responding after the software update. restored the system but still no luck.

Similar Messages

Maybe you are looking for