TS1398 Wifi wont connect after io6 update

After doing the ios6 update on my iphone 4 i cannot connect to my wifi anymore it wont even locate it either it has been like this for nearly a week. Anyone kmnow hoe to solve it tried few things I have seen on internet but nothing seems to be working

Try this. I just did and it worked. I have Iphone 4S and upgraded to IOS 6 this morning at home. At home I use a cisco router for wifi. My newly upgraded Iphone would only allow me to connect as a guest to wifi but even so my email, safari, and apps requiring a network did not work. My ATT network was ok. But still no safari, no email, nada.
I went to Settings > General > Reset > Reset Network Settings
Then I waited. I tried to log in to my wifi again and this time it allowed me to enter in the wifi password.So, now everything is working fine.
If you know your wifi password, it's worth a shot. My son works at the Apple store and he told me to try this reset and it did work.
Hope it works for you.

Similar Messages

  • Firefox wont connect after auto update!!

    Hi, for ages now my Firefox has tried to auto update every so often. After the update it would never connect to the internet, so I would uninstall and re install the previous version that i still had in my downloads list. However, yesterday it did the same thing, so I uninstalled but the old version installer has vanished from my downloads list!! So i set about trying to get the updated version to work. Allowing it on the firewall, turning off firewall...nothing. I just don't understand!! Please help!!

    Some problems occurs when your Internet security program was set
    to trust the previous version of Firefox, but no longer recognizes your
    updated version as trusted. Now how to fix the problem: To allow
    Firefox to connect to the Internet again;
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
    * Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
    '''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

  • Public wifi not connecting after Mavericks update

    Ever since I upgraded to the new Mavericks OS I haven't been able to connect to wifi at work, which is a public access wifi that requires a login screen to be opened in Safari. I can connect to wifi at home or even wifi that is open, but if it has a login screen like at Starbucks, McDonalds or in this case my work, it says that my computer is out of range. The router is literally 10 feet away from me. I have tried "Forget This Network", network diagnostics, even entering in the IP, DNS and other perameters manually, but to no avail.
    Please help, this is extremely frustrating. I have been using my hotspot on my phone for an internet connection at work.

    Have you tried using the Image Capture app located in your Applications folder?
    You can Import photos to the Preview app from there if you want or another photo editing app you have installed.

  • TS1398 Wifi not responding after the software update. restored the system but still no luck.

    After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Any news on ios 8.0.3 update? Been waiting for it coz of my slow wifi connection after i updated my iphone 5s to ios 8.

    Any news on ios 8.0.3 update? Been waiting for it coz of my slow wifi connection after i updated my iphone 5s to ios 8.

    I have heard rumours of an 8.1 update for developers. I just found another bug in 10.9.5. I am beginning to think that nobody should touch any update from Apple until they can get their very serious Q/A problems sorted out. This is getting bad.

  • I PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

    i PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

    Sorry to hear that.
    Do you have a technical support question?  If so, please don't hesitate to ask.  Also, please let us know the troubleshooting steps you've taken so far.

  • App store goes blank after io6 update on 4s

    app stores goes blank white after io6 update on 4s

    it could be that youll have to delete and reeneter your email onto it.
    go to settings>mail,contacts,calanders>tap on your email.
    scroll all the way down. tap the big red delete button.
    go back into mail contacts and calanders and tap on add account and re add it.

  • HT4623 How do I retore app icons to screen after IO6 update?  They now appear only in App store list

    How do I retore app icons to screen after IO6 update?  They now appear only in App store list

    Go to iTunes, click on Apps in the left window, to bring up your app library. Then click on "check for updates" in the right window, bottom corner. If there are any updates available, you'll be notified of the number and you'll have to choose the apps you want to update in the next screen shown, or update them all at once after filling in your password.
    You can also click on one app in the library and choose "get info" to see the actual version saved in your library.

  • Apple TV2 can't find my network connection after recent update?

    Why can't my Apple TV2 can't find my network connection after recent update?

    I had to update the software on my Airport Extreme then reset my apple tv and that resolved the issue for me.

  • Wont boot after windows update

    M y Sateite A305 s6916 wont boot after windows updates tried to install.

    Satellite A305-S6916
    tried .. every option on F8
    Try this. Download a repair disc from here.
       Windows Vista Recovery Environment ISO X64 version (64 bit)
    If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
       Startup Repair: frequently asked questions
    Also try a System Restore.
       What are the system recovery options in Windows Vista?
    -Jerry

  • HT4623 what do u do if your iphone wont activate after u update it

    what do u do if your iphone wont activate after u update it

    You contact the carrier it's locked to and see if they will unlock it for you.  Activation problems are almost always due to the fact that the phone was hacked to unlock it instead of being legitimately unlocked.
    Of course, this can also happen if you're trying to activate it without a SIM in it. You can not activate the phone without a SIM.

  • Satellite Pro C850 wont work after Bios update

    my satellite pro c850 cd wont work after bios update from toshiba.
    what do i do?

    Saying: dont work you mean it does not power up or what do you mean exactly?
    Did you flash the BIOS properly?
    Possibly something went wrong during the update and this means that ROM module isnt flashed properly
    In most cases a special BIOS crisis disk would be needed to get it working
    Not quite sure if you can get it fixed by your own
    Check this thread. Maybe it helps:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
    Otherwise you need help from authorized service provider available in your country.

  • TS1398 ipod wont connect to public wifi?

    My iPod wont connect to public wifi, but it connects to my home wifi without a problem?  how do i fix this??

    I believe I may have solved this
    When you can't log into public WiFi ...
    with an iDevice…
    because the Server times out ...
    or the login/registration page just won't load ...
      ********Simply do this***********
    Go into settings> WiFi and tap the little info icon for the network you are trying to join
    If you see two slider buttons, these are the cause of your woes
    One says "Auto Join" (or similar) - you can leave this ON
    The second button is "Auto Login" - you must turn this OFF (slide it left so it is grey not green)
    Now go back and reselect the network.
    If the login page doesn't come up automatically, open a Safari window and enter any address
    Bingo!
    I have reproduced this issue and solution in 100% of the public WiFi spots which I could previously not access. Please not that I also have "Block Pop-Ups" turned OFF in Settings> Safari, though I do not know if this is a necessary step.
    I have filed a bug report with Apple. Feel free to contact them yourselves if this workaround works for you.
    Peace y'all
    <Edited by Host>

  • Iphone wont connect after update

    My iphone will not connect after downloading the iOs 5 update.

    Ok this is how I fixed this. Apparently iTunes uses Safari.
    Go to Settings -> Safari -> and Clear Cookies and Data and also Clear History - scroll down to see those settings.
    Set Block Cookies to either "from third parties and advertisers" or "Never" (you choose which one)
    In Advanced (scroll down its the last setting) make sure JavaScript in ON
    Here  is the last step I had to make to fix it - which may not apply to you.  Some time ago I changed my primary email for apple. I noticed it was  asking me to enter the password for the secondary email.
    I  went into iTunes and App Store, tapped my Apple Id and then Sign Out. I  then resigned in using my primary Apple email and password.
    Just to make sure, I turned the phone off and on, but honestly this may be optional.
    I am now working again.
    I hope this helps you.

  • [SOLVED] RT2870 drops connection after pacman update

    Since last pacman upgrade my USB wireless works for just a few seconds while used; while watching transfer speed I see at first full speed and then going slower and slower and in a few secs totally stopped, without being disconnected. I have to reboot to get it working again (worked sometimes by ip link set wlan 0 down & up)
    No difference using Wicd or networkmanager.
    I have never had any issues earlier even since Kernel 3.0.
    Linksys router with standard WPA2 configuration, other computers in house connecting without problems.
    lsusb:
    D-Link System DWA-140 RangeBooster N Adapter(rev.B1) [Ralink RT2870]
    uname -r
    3.2.8-1-ARCH
    I've tried blacklisting all the kernel rt2800usb modules which supposedly have taken over specific Realtek drivers according to wiki
    https://wiki.archlinux.org/index.php/Wi … and_rt2870
    with no effect.
    Tried killing wpa_supplicant (only found one instance though) as suggested on some blogpost but no effect.
    Tried the proprietary rt2870sta driver as suggested in Wiki
      https://wiki.archlinux.org/index.php/Rt2870
    -got a working link on ra0 but it wouldn't connect to WiFi (kept asking for password).
    More debug info:
    lsmod | grep rt > lsmod.txt
    exportfs 3695 1 nfsd
    rt2800usb 14400 0
    rt2x00usb 9076 1 rt2800usb
    rt2800lib 40260 1 rt2800usb
    rt2x00lib 35183 3 rt2800lib,rt2x00usb,rt2800usb
    crc_ccitt 1363 1 rt2800lib
    mac80211 228527 3 rt2x00lib,rt2800lib,rt2x00usb
    cfg80211 172260 2 mac80211,rt2x00lib
    iTCO_vendor_support 1961 1 iTCO_wdt
    usbcore 146241 7 ehci_hcd,uhci_hcd,usbhid,rt2x00usb,rt2800usb,usblp
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.2.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
    [ 0.000000] Command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
    [ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: System manufacturer P5Q SE/P5Q SE, BIOS 0502 08/20/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 120000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff70000
    [ 0.000000] 0000000000 - 00cfe00000 page 2M
    [ 0.000000] 00cfe00000 - 00cff70000 page 4k
    [ 0.000000] kernel direct mapping tables up to cff70000 @ 1fffa000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
    [ 0.000000] 0100000000 - 0130000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 130000000 @ cff6a000-cff70000
    [ 0.000000] RAMDISK: 37d76000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000fb2c0 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 00000000cff70100 0005C (v01 A_M_I_ OEMXSDT 08000820 MSFT 00000097)
    [ 0.000000] ACPI: FACP 00000000cff70290 000F4 (v03 A_M_I_ OEMFACP 08000820 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 00000000cff70440 0907C (v01 A0985 A0985001 00000001 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000cff7e000 00040
    [ 0.000000] ACPI: APIC 00000000cff70390 0006C (v01 A_M_I_ OEMAPIC 08000820 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 00000000cff70400 0003C (v01 A_M_I_ OEMMCFG 08000820 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 00000000cff7e040 00081 (v01 A_M_I_ AMI_OEM 08000820 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000cff794c0 00038 (v01 A_M_I_ OEMHPET 08000820 MSFT 00000097)
    [ 0.000000] ACPI: OSFR 00000000cff79500 000B0 (v01 A_M_I_ OEMOSFR 08000820 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000cff7e5d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000130000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
    [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00130000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000cff70
    [ 0.000000] 0: 0x00100000 -> 0x00130000
    [ 0.000000] On node 0 totalpages: 1048319
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 831408 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3072 pages used for memmap
    [ 0.000000] Normal zone: 193536 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
    [ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
    [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
    [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
    [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s82176 r8192 d24320 u524288
    [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028858
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 4047500k/4980736k available (4488k kernel code, 787460k absent, 145776k reserved, 4409k data, 736k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2997.032 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 5996.81 BogoMIPS (lpj=9990106)
    [ 0.003340] pid_max: default: 32768 minimum: 301
    [ 0.003361] Security Framework initialized
    [ 0.003367] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006673] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.008366] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.009152] Mount-cache hash table entries: 256
    [ 0.009284] Initializing cgroup subsys cpuacct
    [ 0.009289] Initializing cgroup subsys memory
    [ 0.009297] Initializing cgroup subsys devices
    [ 0.009298] Initializing cgroup subsys freezer
    [ 0.009300] Initializing cgroup subsys net_cls
    [ 0.009302] Initializing cgroup subsys blkio
    [ 0.009332] CPU: Physical Processor ID: 0
    [ 0.009333] CPU: Processor Core ID: 0
    [ 0.009335] mce: CPU supports 6 MCE banks
    [ 0.009342] CPU0: Thermal monitoring enabled (TM2)
    [ 0.009346] using mwait in idle threads.
    [ 0.010343] ACPI: Core revision 20110623
    [ 0.013339] ftrace: allocating 17394 entries in 69 pages
    [ 0.017049] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.050789] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
    [ 0.053330] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
    [ 0.053330] APIC delta adjusted to PM-Timer: 2081243 (2020688)
    [ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.053330] ... version: 2
    [ 0.053330] ... bit width: 40
    [ 0.053330] ... generic registers: 2
    [ 0.053330] ... value mask: 000000ffffffffff
    [ 0.053330] ... max period: 000000007fffffff
    [ 0.053330] ... fixed-purpose events: 3
    [ 0.053330] ... event mask: 0000000700000003
    [ 0.070123] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.096675] Booting Node 0, Processors #1
    [ 0.096678] smpboot cpu 1: start_ip = 9a000
    [ 0.193349] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.199992] Brought up 2 CPUs
    [ 0.199995] Total of 2 processors activated (11992.51 BogoMIPS).
    [ 0.202833] devtmpfs: initialized
    [ 0.203768] PM: Registering ACPI NVS region at cff7e000 (335872 bytes)
    [ 0.203929] print_constraints: dummy:
    [ 0.203965] NET: Registered protocol family 16
    [ 0.204054] ACPI: bus type pci registered
    [ 0.204105] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.204107] PCI: not using MMCONFIG
    [ 0.204109] PCI: Using configuration type 1 for base access
    [ 0.204490] bio: create slab <bio-0> at 0
    [ 0.204490] ACPI: Added _OSI(Module Device)
    [ 0.204490] ACPI: Added _OSI(Processor Device)
    [ 0.204490] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.204490] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.204490] ACPI: EC: Look up EC in DSDT
    [ 0.206720] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.211061] ACPI: SSDT 00000000cff7e0d0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
    [ 0.211260] ACPI: Dynamic OEM Table Load:
    [ 0.211262] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
    [ 0.211420] ACPI: SSDT 00000000cff7e350 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
    [ 0.211621] ACPI: Dynamic OEM Table Load:
    [ 0.211623] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
    [ 0.211740] ACPI: Interpreter enabled
    [ 0.211743] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.211758] ACPI: Using IOAPIC for interrupt routing
    [ 0.211772] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.212438] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.246853] ACPI: No dock devices found.
    [ 0.246855] HEST: Table not found.
    [ 0.246858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.246900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.246996] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.246998] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.247000] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.247001] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.247003] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
    [ 0.247012] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [ 0.247043] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [ 0.247071] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.247074] pci 0000:00:01.0: PME# disabled
    [ 0.247103] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [ 0.247137] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
    [ 0.247179] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [ 0.247213] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
    [ 0.247254] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [ 0.247288] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
    [ 0.247336] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [ 0.247354] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
    [ 0.247428] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.247432] pci 0000:00:1a.7: PME# disabled
    [ 0.247451] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [ 0.247463] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
    [ 0.247516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.247519] pci 0000:00:1b.0: PME# disabled
    [ 0.247535] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [ 0.247589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.247592] pci 0000:00:1c.0: PME# disabled
    [ 0.247614] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
    [ 0.247669] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.247672] pci 0000:00:1c.5: PME# disabled
    [ 0.247690] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [ 0.247724] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
    [ 0.247766] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [ 0.247800] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
    [ 0.247841] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [ 0.247875] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
    [ 0.247924] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [ 0.247941] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
    [ 0.248016] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.248019] pci 0000:00:1d.7: PME# disabled
    [ 0.248035] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.248084] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [ 0.248181] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
    [ 0.248193] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
    [ 0.248199] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
    [ 0.248205] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
    [ 0.248212] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
    [ 0.248218] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f]
    [ 0.248224] pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f]
    [ 0.248262] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [ 0.248274] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
    [ 0.248290] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
    [ 0.248317] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
    [ 0.248328] pci 0000:00:1f.5: reg 10: [io 0xc000-0xc007]
    [ 0.248335] pci 0000:00:1f.5: reg 14: [io 0xbc00-0xbc03]
    [ 0.248341] pci 0000:00:1f.5: reg 18: [io 0xb880-0xb887]
    [ 0.248347] pci 0000:00:1f.5: reg 1c: [io 0xb800-0xb803]
    [ 0.248353] pci 0000:00:1f.5: reg 20: [io 0xb480-0xb48f]
    [ 0.248359] pci 0000:00:1f.5: reg 24: [io 0xb400-0xb40f]
    [ 0.248418] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
    [ 0.248426] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
    [ 0.248434] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.248443] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
    [ 0.248449] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
    [ 0.248455] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
    [ 0.248497] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.248499] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.248502] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.248505] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.248536] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [ 0.248543] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.248590] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
    [ 0.248610] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
    [ 0.248621] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
    [ 0.248706] pci 0000:02:00.0: PME# supported from D3hot D3cold
    [ 0.248710] pci 0000:02:00.0: PME# disabled
    [ 0.248728] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.248736] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.248739] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.248742] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.248794] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.248801] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.248803] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.248805] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.248807] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.248809] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
    [ 0.248822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.248885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.248906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.248953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    [ 0.248985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [ 0.249003] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.249005] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.249007] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.254308] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.254341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.254373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [ 0.254405] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.254437] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.254469] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    [ 0.254501] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.254533] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.254589] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.254589] vgaarb: loaded
    [ 0.254589] vgaarb: bridge control possible 0000:01:00.0
    [ 0.254589] PCI: Using ACPI for IRQ routing
    [ 0.259493] PCI: pci_cache_line_size set to 64 bytes
    [ 0.259546] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.259547] reserve RAM buffer: 00000000cff70000 - 00000000cfffffff
    [ 0.259624] NetLabel: Initializing
    [ 0.259626] NetLabel: domain hash size = 128
    [ 0.259627] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.259637] NetLabel: unlabeled traffic allowed by default
    [ 0.259649] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.259653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.259656] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.270027] Switching to clocksource hpet
    [ 0.274998] pnp: PnP ACPI init
    [ 0.275013] ACPI: bus type pnp registered
    [ 0.275071] pnp 00:00: [bus 00-ff]
    [ 0.275073] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.275074] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.275076] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.275078] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.275079] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.275081] pnp 00:00: [mem 0xd0000000-0xffffffff window]
    [ 0.275124] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.275131] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.275167] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.275170] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.275193] pnp 00:02: [dma 4]
    [ 0.275194] pnp 00:02: [io 0x0000-0x000f]
    [ 0.275196] pnp 00:02: [io 0x0081-0x0083]
    [ 0.275197] pnp 00:02: [io 0x0087]
    [ 0.275198] pnp 00:02: [io 0x0089-0x008b]
    [ 0.275202] pnp 00:02: [io 0x008f]
    [ 0.275203] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.275225] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.275234] pnp 00:03: [io 0x0070-0x0071]
    [ 0.275243] pnp 00:03: [irq 8]
    [ 0.275263] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.275269] pnp 00:04: [io 0x0061]
    [ 0.275290] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.275296] pnp 00:05: [io 0x00f0-0x00ff]
    [ 0.275300] pnp 00:05: [irq 13]
    [ 0.275322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.275431] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275433] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275435] pnp 00:06: [io 0x0290-0x029f]
    [ 0.275467] system 00:06: [io 0x0290-0x029f] has been reserved
    [ 0.275470] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275531] pnp 00:07: [io 0x0010-0x001f]
    [ 0.275533] pnp 00:07: [io 0x0022-0x003f]
    [ 0.275534] pnp 00:07: [io 0x0044-0x004d]
    [ 0.275536] pnp 00:07: [io 0x0050-0x005f]
    [ 0.275537] pnp 00:07: [io 0x0062-0x0063]
    [ 0.275538] pnp 00:07: [io 0x0065-0x006f]
    [ 0.275540] pnp 00:07: [io 0x0072-0x007f]
    [ 0.275541] pnp 00:07: [io 0x0080]
    [ 0.275542] pnp 00:07: [io 0x0084-0x0086]
    [ 0.275543] pnp 00:07: [io 0x0088]
    [ 0.275545] pnp 00:07: [io 0x008c-0x008e]
    [ 0.275546] pnp 00:07: [io 0x0090-0x009f]
    [ 0.275547] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.275549] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.275550] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.275551] pnp 00:07: [io 0x0800-0x087f]
    [ 0.275553] pnp 00:07: [io 0x0400-0x03ff disabled]
    [ 0.275554] pnp 00:07: [io 0x0500-0x057f]
    [ 0.275556] pnp 00:07: [mem 0xfed08000-0xfed08fff]
    [ 0.275557] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
    [ 0.275558] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
    [ 0.275560] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
    [ 0.275610] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.275612] system 00:07: [io 0x0800-0x087f] has been reserved
    [ 0.275614] system 00:07: [io 0x0500-0x057f] has been reserved
    [ 0.275616] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.275618] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.275620] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.275622] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
    [ 0.275625] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275666] pnp 00:08: [mem 0xfed00000-0xfed003ff]
    [ 0.275690] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.275722] pnp 00:09: [mem 0xffb00000-0xffbfffff]
    [ 0.275724] pnp 00:09: [mem 0xfff00000-0xffffffff]
    [ 0.275745] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.275772] pnp 00:0a: [mem 0xffc00000-0xffefffff]
    [ 0.275807] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
    [ 0.275809] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275845] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275847] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275848] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
    [ 0.275850] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
    [ 0.275885] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.275887] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.275889] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275908] pnp 00:0c: [io 0x0060]
    [ 0.275909] pnp 00:0c: [io 0x0064]
    [ 0.275915] pnp 00:0c: [irq 1]
    [ 0.275945] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.276048] pnp 00:0d: [mem 0xe0000000-0xefffffff]
    [ 0.276083] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.276086] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.276183] pnp 00:0e: [mem 0x00000000-0x0009ffff]
    [ 0.276185] pnp 00:0e: [mem 0x000c0000-0x000cffff]
    [ 0.276187] pnp 00:0e: [mem 0x000e0000-0x000fffff]
    [ 0.276188] pnp 00:0e: [mem 0x00100000-0xcfffffff]
    [ 0.276190] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.276230] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.276232] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.276234] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.276236] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
    [ 0.276238] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.276322] pnp: PnP ACPI: found 15 devices
    [ 0.276323] ACPI: ACPI bus type pnp unregistered
    [ 0.282821] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.282845] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.282848] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf05fffff]
    [ 0.282851] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.282853] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.282855] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.282857] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.282860] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.282863] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [ 0.282865] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.282869] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf05fffff]
    [ 0.282872] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.282877] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.282879] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.282882] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.282885] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.282890] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [ 0.282906] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.282909] pci 0000:00:01.0: setting latency timer to 64
    [ 0.282913] pci 0000:00:1c.0: enabling device (0106 -> 0107)
    [ 0.282919] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.282922] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.282926] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.282929] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.282934] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.282937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.282938] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.282940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.282942] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.282943] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
    [ 0.282945] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.282947] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
    [ 0.282949] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.282950] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
    [ 0.282952] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf05fffff]
    [ 0.282954] pci_bus 0000:03: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.282956] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.282957] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.282959] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.282961] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.282962] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.282964] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.282966] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.282967] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xffffffff]
    [ 0.282994] NET: Registered protocol family 2
    [ 0.283102] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.283911] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.286830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.287221] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.287223] TCP reno registered
    [ 0.287231] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.287261] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.287380] NET: Registered protocol family 1
    [ 0.287533] pci 0000:01:00.0: Boot video device
    [ 0.287538] PCI: CLS 32 bytes, default 64
    [ 0.287587] Unpacking initramfs...
    [ 0.316854] Freeing initrd memory: 2536k freed
    [ 0.317344] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.317346] Placing 64MB software IO TLB between ffff8800cbf6a000 - ffff8800cff6a000
    [ 0.317348] software IO TLB at phys 0xcbf6a000 - 0xcff6a000
    [ 0.317656] audit: initializing netlink socket (disabled)
    [ 0.317668] type=2000 audit(1331070636.316:1): initialized
    [ 0.329229] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.351410] VFS: Disk quotas dquot_6.5.2
    [ 0.351460] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.351537] msgmni has been set to 7910
    [ 0.351674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.351694] io scheduler noop registered
    [ 0.351696] io scheduler deadline registered
    [ 0.351723] io scheduler cfq registered (default)
    [ 0.351807] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.351832] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.351871] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.351899] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.351947] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.351975] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.352104] intel_idle: MWAIT substates: 0x22220
    [ 0.352105] intel_idle: does not run on family 6 model 23
    [ 0.352132] ERST: Table is not found!
    [ 0.352133] GHES: HEST is not enabled!
    [ 0.352190] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.423563] Linux agpgart interface v0.103
    [ 0.423624] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.423626] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.424352] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.424437] mousedev: PS/2 mouse device common for all mice
    [ 0.424487] rtc_cmos 00:03: RTC can wake from S4
    [ 0.424570] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.424591] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.424600] cpuidle: using governor ladder
    [ 0.424601] cpuidle: using governor menu
    [ 0.424761] TCP cubic registered
    [ 0.424857] NET: Registered protocol family 10
    [ 0.425184] NET: Registered protocol family 17
    [ 0.425187] Registering the dns_resolver key type
    [ 0.425287] PM: Checking hibernation image partition /dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0
    [ 0.442444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.442457] PM: Hibernation image not present or could not be loaded.
    [ 0.442463] registered taskstats version 1
    [ 0.453068] rtc_cmos 00:03: setting system clock to 2012-03-06 21:50:37 UTC (1331070637)
    [ 0.453104] Initializing network drop monitor service
    [ 0.454145] Freeing unused kernel memory: 736k freed
    [ 0.454268] Write protecting the kernel read-only data: 8192k
    [ 0.458421] Freeing unused kernel memory: 1636k freed
    [ 0.460355] Freeing unused kernel memory: 660k freed
    [ 0.465585] udevd[37]: starting version 181
    [ 0.489348] usbcore: registered new interface driver usbfs
    [ 0.489369] usbcore: registered new interface driver hub
    [ 0.490707] usbcore: registered new device driver usb
    [ 0.492744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.492777] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.492811] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.492815] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.492852] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.492879] ehci_hcd 0000:00:1a.7: debug port 1
    [ 0.497714] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.497902] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [ 0.497918] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
    [ 0.500931] SCSI subsystem initialized
    [ 0.504356] libata version 3.00 loaded.
    [ 0.510015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.510276] hub 1-0:1.0: USB hub found
    [ 0.510280] hub 1-0:1.0: 6 ports detected
    [ 0.510367] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.510390] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.510393] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.510401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.510423] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.514289] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.514303] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
    [ 0.526698] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.526921] hub 2-0:1.0: USB hub found
    [ 0.526924] hub 2-0:1.0: 6 ports detected
    [ 0.527005] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.527010] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.527013] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.527021] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.527047] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
    [ 0.527239] hub 3-0:1.0: USB hub found
    [ 0.527243] hub 3-0:1.0: 2 ports detected
    [ 0.527303] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.527308] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.527310] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.527316] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.527341] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
    [ 0.527491] hub 4-0:1.0: USB hub found
    [ 0.527494] hub 4-0:1.0: 2 ports detected
    [ 0.527547] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.527552] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 0.527554] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 0.527560] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 0.527579] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
    [ 0.527671] hub 5-0:1.0: USB hub found
    [ 0.527673] hub 5-0:1.0: 2 ports detected
    [ 0.527725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.527729] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.527731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.527737] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 0.527755] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
    [ 0.527850] hub 6-0:1.0: USB hub found
    [ 0.527853] hub 6-0:1.0: 2 ports detected
    [ 0.527912] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.527916] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.527918] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.527925] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 0.527950] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
    [ 0.528041] hub 7-0:1.0: USB hub found
    [ 0.528044] hub 7-0:1.0: 2 ports detected
    [ 0.528095] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.528099] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.528102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.528107] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 0.528126] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
    [ 0.528217] hub 8-0:1.0: USB hub found
    [ 0.528220] hub 8-0:1.0: 2 ports detected
    [ 0.528277] ata_piix 0000:00:1f.2: version 2.13
    [ 0.528284] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.528288] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 0.528322] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 0.528959] scsi0 : ata_piix
    [ 0.529039] scsi1 : ata_piix
    [ 0.529777] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
    [ 0.529781] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
    [ 0.529808] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.529812] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    [ 0.529848] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 0.530605] scsi2 : ata_piix
    [ 0.531122] scsi3 : ata_piix
    [ 0.531716] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19
    [ 0.531719] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19
    [ 0.833346] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 0.860625] ata3: SATA link down (SStatus 0 SControl 300)
    [ 0.871253] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.133351] usb 2-5: new high-speed USB device number 4 using ehci_hcd
    [ 1.320013] Refined TSC clocksource calibration: 2996.999 MHz.
    [ 1.320019] Switching to clocksource tsc
    [ 1.326723] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.326735] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.326848] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.326858] ata1.01: SATA link down (SStatus 0 SControl 300)
    [ 1.334172] ata1.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133
    [ 1.334175] ata1.00: 145226112 sectors, multi 16: LBA48 NCQ (not used)
    [ 1.347438] ata1.00: configured for UDMA/133
    [ 1.347545] scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
    [ 1.356883] ata2.00: ATA-7: SAMSUNG HD321KJ, CP100-05, max UDMA7
    [ 1.356887] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.371850] ata2.01: HPA detected: current 1465147055, native 1465149168
    [ 1.371855] ata2.01: ATA-8: WDC WD7500AACS-00ZJB0, 01.01B01, max UDMA/133
    [ 1.371858] ata2.01: 1465147055 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.376886] ata2.00: configured for UDMA/133
    [ 1.390777] ata2.01: configured for UDMA/133
    [ 1.390856] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
    [ 1.390990] scsi 1:0:1:0: Direct-Access ATA WDC WD7500AACS-0 01.0 PQ: 0 ANSI: 5
    [ 1.393373] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
    [ 1.393409] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.393411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.393427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.393753] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.393840] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.393843] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.393860] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.394066] sd 1:0:1:0: [sdc] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
    [ 1.404247] sdb: sdb2
    [ 1.404286] sd 1:0:1:0: [sdc] Write Protect is off
    [ 1.404290] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.404316] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.410206] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.410713] sdc: sdc1
    [ 1.412675] sd 1:0:1:0: [sdc] Attached SCSI disk
    [ 1.414632] sda: sda1 sda2 sda3
    [ 1.414890] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.483346] usb 7-1: new low-speed USB device number 2 using uhci_hcd
    [ 1.675206] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input1
    [ 1.675328] generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
    [ 1.675340] usbcore: registered new interface driver usbhid
    [ 1.675341] usbhid: USB HID core driver
    [ 1.847718] PM: Starting manual resume from disk
    [ 1.847720] PM: Hibernation image partition 8:2 present
    [ 1.847721] PM: Looking for hibernation image.
    [ 1.847851] PM: Image not found (code -22)
    [ 1.847854] PM: Hibernation image not present or could not be loaded.
    [ 1.887347] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.955372] udevd[142]: starting version 181
    [ 3.102653] FS-Cache: Loaded
    [ 3.138386] RPC: Registered named UNIX socket transport module.
    [ 3.138388] RPC: Registered udp transport module.
    [ 3.138390] RPC: Registered tcp transport module.
    [ 3.138391] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 3.206448] FS-Cache: Netfs 'nfs' registered for caching
    [ 3.340426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 3.340433] ACPI: Power Button [PWRB]
    [ 3.340480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 3.340483] ACPI: Power Button [PWRF]
    [ 3.367741] iTCO_vendor_support: vendor-support=0
    [ 3.368037] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 3.368042] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
    [ 3.368043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.420207] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 3.420218] ATL1E 0000:02:00.0: setting latency timer to 64
    [ 3.460984] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 3.646986] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.646990] Disabling lock debugging due to kernel taint
    [ 3.658130] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 3.658258] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
    [ 3.658557] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 3.808444] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.808451] nvidia 0000:01:00.0: setting latency timer to 64
    [ 3.808456] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 3.808546] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
    [ 3.922194] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 3.922239] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 3.922258] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [ 3.964505] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
    [ 4.187852] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.420014] usb 2-1: reset high-speed USB device number 2 using ehci_hcd
    [ 4.487427] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10B6
    [ 4.487464] usbcore: registered new interface driver usblp
    [ 4.597153] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 4.597522] Registered led device: rt2800usb-phy0::radio
    [ 4.597538] Registered led device: rt2800usb-phy0::assoc
    [ 4.597553] Registered led device: rt2800usb-phy0::quality
    [ 4.597572] usbcore: registered new interface driver rt2800usb
    [ 4.896528] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 4.931213] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.962285] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.004187] Adding 8279036k swap on /dev/sda2. Priority:-1 extents:1 across:8279036k
    [ 5.887306] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 36.076486] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 36.077062] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 50.139089] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 53.445833] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 53.490782] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 53.491333] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 53.732458] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 57.151881] wlan0: authenticate with c0:c1:c0:36:e7:5d (try 1)
    [ 57.153391] wlan0: authenticated
    [ 57.170628] wlan0: associate with c0:c1:c0:36:e7:5d (try 1)
    [ 57.174138] wlan0: RX AssocResp from c0:c1:c0:36:e7:5d (capab=0x411 status=0 aid=1)
    [ 57.174142] wlan0: associated
    [ 57.197936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 57.264846] Intel AES-NI instructions are not detected.
    [ 67.456668] wlan0: no IPv6 routers present
    [ 306.299972] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
    [ 306.300485] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 310.963856] wlan0: deauthenticating from c0:c1:c0:36:e7:5d by local choice (reason=3)
    [ 311.091991] cfg80211: Calling CRDA to update world regulatory domain
    [ 311.342430] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 313.239060] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 314.375684] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 314.545703] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 314.545818] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
    [ 314.581962] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 314.582102] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
    [ 314.582703] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 314.583112] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 325.469976] eth0: no IPv6 routers present
    Last edited by dabbi2000 (2012-03-07 22:57:16)

    certainly didn't expect this... turned off power saving
    iwconfig wlan0 power off
    and all is well again. Surely doesn't explain why it started after kernel update. But it works...

Maybe you are looking for