TS140 Windows Server 2003?

I have a customer with a new TS140 who needs to load Windows Server 2003 on the box. The reason for having to load Windows Server 2003 is a legacy piece of software that is not compatible with newer versions of Windows.
This is a TS140 70A4 001MUX model. It meets system requirements for the OS (we were able to purchase a Lenovo Enterprise Server 2003 OEM license from a liquidator) but the system is newer than any actually listed in the HCL for WIndows Server 2003
Initial attempts to install using Lenovo OEM Windows Server media results in a blue screen, unsurprising given the chronological distance between the OS media and the hardware.
EasyStartup Version 3.8.1d shipped with the server but 2008 is the earliest OS listed in the pick list. Is there an earlier version that loads drivers for this hardware for Server 2003? Failing that are there drivers that can be slipstreamed into the OS install media?
The big question: Has anyone actually installed Server 2003 on this hardware? Should I even bother trying?
Thanks for any help,
Coypu

Got a fix for you:
install Hyper-V 2012 R2 on the TS140 ( it's free!)
http://technet.microsoft.com/en-us/evalcenter/dn205299.aspx
then... install your 2003Server as a VM.
Access it through any workstation running Remote Desktop connection.
Or access if directly from the "server Core Hyper-V" machine by running the (free!) Hyper-V Tools. ( this provides a GUI, and remote desktop client)
see http://www.probus-it.se/hypervtools
another great tool for those running Hyper-V 2012 "core" (the free OS with no GUI) is the very handy A43
see http://www.a43filemanager.com/
more great tools here... http://hypervking.info/hyper-v-tools/

Similar Messages

I am trying to remote into a Windows Server 2003 from a Windows 7 machine and having issues

I am trying to remote into a Windows Server 2003 from a Windows 7 machine. It says "The terminal server has exceeded the maximum number of allowed connections".
My first stop in trying to solve this problem was here:
[URL="http://www.howtogeek.com/howto/windows/command-line-hack-for-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"]howtogeek.com[/URL]
And it says:
[I]
[INDENT]This problem happens because Windows only allows two remote terminal services connections when you are in administrative mode, and you’ve either got two people already on that server, or more likely, you’ve got a disconnected session that still thinks
it is active.
The problem with this error is that you have to actually get on the server console to fix the problem if the server isn’t in a domain. ([B]If you are in a domain, then just open Terminal Services Manager and log off or disconnect the sessions[/B])[/INDENT][/I]
So it seems to suggest that all I have to do really is to run the Terminal Services Manager but I cannot find it.
This web site from mssqltips.com [URL="http://www.mssqltips.com/sqlservertip/1981/remote-desktop-error-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"](click here)[/URL] says all I need to do is first execute "mstsc /
admin" from the command line. But, when I do that, I get a message when I try to remote to the server, that says this: "To log on to this remote console session, you must have administrative permissions on this computer".
So, what now? What do you suggest?

Hi Bobby,
Yes, it is by design. By default, Windows Server only accepts two concurrent administrative sessions (Administrative Mode). It means that only two administrators can work on the server at
the same time.
If you would like more concurrent sessions, you need to purchase RDS CALs, install Terminal Services related server roles with proper configurations on the server.
Remote Desktop for Administration (server 2003)
http://technet.microsoft.com/en-us/library/cc785186(v=ws.10).aspx
What Is Terminal Services?
http://technet.microsoft.com/en-us/library/cc782486(v=ws.10).aspx
Terminal Services Configuration
http://technet.microsoft.com/en-us/library/cc787078(v=ws.10).aspx
Purchase client access licenses
http://technet.microsoft.com/en-us/library/3660ac5a-7468-48d3-b7e8-5529de8fb6c5
Thanks.
Jeremy Wu
TechNet Community Support

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Installation problem with windows server 2003 64 bit

I downloaded all hyperion components from e-deleivery for windows server 2003 64 bit when i tried to install it a message said that some component are not compatible when i removed stratigic finance and FDM components the installation started and completed .in the configuration phase many components failed to configured and here's a copy of the log file:
(Nov 21, 2010, 02:25:51 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Nov 21, 2010, 02:30:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NumberFormatException: null
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.valueOf(Unknown Source)
     at com.hyperion.hit.registry.ServiceComponentImpl.getPort(ServiceComponentImpl.java:45)
     at com.hyperion.hub.HubAppServerDeployer.checkOpenLDAPFromRegistry(HubAppServerDeployer.java:282)
     at com.hyperion.hub.HubAppServerDeployer.updateOpenLDAPPort(HubAppServerDeployer.java:175)
     at com.hyperion.hub.HubAppServerDeployer.preDeploy(HubAppServerDeployer.java:113)
     at com.hyperion.cis.config.AppServerDeployer.preDeploy(AppServerDeployer.java:205)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:604)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:41:18 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:43:35 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.awb.config.AWBDBConfigurator, ERROR, Error:
java.lang.NullPointerException
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.hyperion.awb.config.PIRegistartionXMLWriter.updateHubDetails(PIRegistartionXMLWriter.java:265)
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:249)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:275)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, Error occured in deRegisterOldProductInstance(): null
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, ERROR:
com.hyperion.cis.config.AppDeployException: CMS Client cannot be created
     at com.hyperion.awb.config.AWBAppServerDeployer.publishBPMAInstanceDocument(AWBAppServerDeployer.java:704)
     at com.hyperion.awb.config.AWBAppServerDeployer.registerProductInstance(AWBAppServerDeployer.java:796)
     at com.hyperion.awb.config.AWBAppServerDeployer.postDeploy(AWBAppServerDeployer.java:350)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:336)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:610)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:50:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:51:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:54:20 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:04 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:16 PM), com.hyperion.essbase.config.EssbaseAgentTaskProcessor, ERROR, Error in executing the script to register Essbase as a service: exitCode = 1
(Nov 21, 2010, 02:58:54 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:15 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:16 PM), com.hyperion.planning.HspDBConfigurator, ERROR, Error happened: Index: 0, Size: 0
(Nov 21, 2010, 02:59:16 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:209)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:03:06 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:05:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:29 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:30 PM), com.hyperion.hfm.config.HfmDbConfigurator, ERROR, Error while configuring HFM DatabaseEntry does not exist for these parameters in tnsnames.ora file.
(Nov 21, 2010, 03:19:30 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.hfm.config.HfmDbConfigurator.configure(HfmDbConfigurator.java:151)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:19:39 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.hfm.config.HfmAppServerTaskProcessor.execute(HfmAppServerTaskProcessor.java:105)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeCustomTask(RunAllTasksWizardAction.java:741)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:188)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
if any one installed hyperion EPMS on windows server 2003 64 bit please i need your help
thanks in advanced
Edited by: eng3m on Nov 21, 2010 3:32 PM

Hi,
EDGE/Crystal Reports Server and Enterprise are no native 64bit applications. That does mean that they only run in 32bit mode. But you can install it on a 64bit hardware with a 64bit OS.
Regards
-Seb.

Add-on installation problem in Windows Server 2003

Hi guys,
I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
Unable to load AddOnInstallAPI.dll
and when i try install using the same installer at the client station, everything is ok.
Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
Thanks you,
Harianto Ng

I've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
Natalya

Java2SDk 1.4.2.06 installation problem on Windows Server 2003

I tried the installation of Java2SDk 1.4.2.06. ,I tried this, but it fails to complete and NO directory folder is created so I cannot continue with the proccess. The OS is Windows Server 2003.
I have done the following procedures:
Enabled/Disabled the IIS configuration
Enabled/Disabled the Windows Firewall
Enabled/Disabled Antivirus software
The error in the event log is:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 3/6/2007
Time: 2:23:49 PM
User: N/A
Computer: GERSSERVER
Description:
Faulting application msiexec.exe, version 3.1.4000.1433, faulting module unknown, version 0.0.0.0, fault address 0x0013b43e.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6d 73 69 ure msi
0018: 65 78 65 63 2e 65 78 65 exec.exe
0020: 20 33 2e 31 2e 34 30 30 3.1.400
0028: 30 2e 31 34 33 33 20 69 0.1433 i
0030: 6e 20 75 6e 6b 6e 6f 77 n unknow
0038: 6e 20 30 2e 30 2e 30 2e n 0.0.0.
0040: 30 20 61 74 20 6f 66 66 0 at off
0048: 73 65 74 20 30 30 31 33 set 0013
0050: 62 34 33 65 b43e
Please advice on this problem. Other tech support recommendations were to reinstall the OS.
I have also tried installing the latest version of Java 2 SDK without success.
Thanks for your support
William Hernandez
UPR-Mayaguez Campus

Thank you so much for your help!
I have just tried as you said. Now I see that actually at the beginning of the intallation, there is a NullPointerException. Here is the error information:
===============================
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
java.lang.NullPointerException
at sun.java2d.SunGraphics2D.revalidateAll(SunGraphics2D.java:2086)
at sun.java2d.SunGraphics2D.drawString(SunGraphics2D.java:2536)
at com.sun.wizards.awt.Header.paint(Header.java:112)
at sun.awt.RepaintArea.paint(RepaintArea.java:177)
at sun.awt.windows.WComponentPeer.handleEvent(WComponentPeer.java:260)
at java.awt.Component.dispatchEventImpl(Component.java:3678)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
===============================
Please help me out of this. Thank you.

HP Cloud Print Driver for Windows Server 2003?

Hello,
I have a unique (complicated) situation that I am trying to find a solution for.
Here is the deal,
My company is trying to set up a temporary remote branch location inside a building where we are unable to wire a network. Our solution is to use a wireless hotspot. Connected to this hotspot, we will have an iPad and an HP Laserjet M525.
The iPad will be connecting to our Citrix environment over VPN through Citrix Receiver to deliver a desktop interface to the iPad. This is needed to access a few applications that are used at the branch.
The problem now is printing, AirPrint wont work because the iPad is on VPN (and its at a windows interface, not the iPad's).
I had the idea of using the HP printers built in ePrint function to print, so I set that up. So now sending at email to [email protected] prints to the HP printer attached to the wireless hotspot.
Emaling to print works, but ideally, I would like this printer to show up in the Windows Devices and Printers, so that the user can just click print, choose the HP printer, and it will print, (with a delay obviously as its sending an email).
So I downloaded the HP ePrint Windows Driver, which has to be installed on the main Citrix servers so that the users session can grab the printer and use it, turns out the driver doesnt work on Windows Server 2003.
My first attempt at a workaround was Google Cloud Print, which was fairly simple to connect to HP ePrint, but apparently the Google Cloud Print Driver doesnt work on Windows Server 2003 either.
Is there a version of the HP ePrint Driver out there that works on Windows Server 2003?
tldr:
I would like to print to a remote HP printer that is connected to a wifi hotspot from our internal network. I need whatever software I download to be compatible with Server 2003.
I understand this is over complicated but thanks for any input.

I believe I understand your issue. You would like to use a print driver to print to your HP ePrint enabled printer from your apps that are hosted by Citrix server. While I believe this makes perfect sense, HP does not have a print driver that officially supports MS TS or Citrix that also supports the ePrint Cloud path. The reason for this is the ePrint windows driver is a "dynamic" print driver (similar to HP UPD dynamic mode) that handles multiple print paths (tcp/ip, wireless direct, cloud, etc) in a single driver instance by dynamically changing the port the print queue is bound to so the port is specific to the delivery path. For example, if printing to a network printer it will use a MS Standard tcp/ip port. If printing to the ePrint cloud a custom port is used, etc. Well, if you have lots of Citrix users trying to print to a single print queue, but to different destinations, the users would be colliding with each other when they print by having the driver trying to change the print queue to different print ports at the same time.
What you could do is install an ePrint print queue on the citrix server if you can control the access to that queue to just your local branch users. Also, if you only have on ePrint enabled printer the situation is even better as only one port will be needed by that queue. You can find the ePrint software at www.hp.com/go/eprintsoftware You might want to download the version of the driver that supports XP as Windows 2003 is very similar print system.
NOTE: this is not a supported environment for this driver. You would be using it without warrenty or support and no promises are being made here.
Good luck if you choose this path and please post back the results. Thanks!

Windows Server 2003 No Mouse or Keyboard

Hi,
After a hard reboot (accidentally being unplugged) I have no mouse and keyboard input. I am stuck on the Login Screen. I am using a hard wired USB keyboard and mouse and I don't have a PS/2 on the computer. Accessing the computer remotely is not an option
because I can't login to start any programs.
Thanks

You might try a repair install.
How to Perform an In-Place Upgrade of Windows Server 2003
How to integrate Windows Server 2003 Service Pack 2 files into the Windows Server 2003 installation folder
If the media is lost.
How to replace Microsoft software or hardware, order service packs, and replace product manuals
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Access windows server 2003 from a local user machine (windows 7 pro)?

Is there a way to look up user accounts from a local machine running windows 7 pro without having to always go to the physical server itself?
The reason is the location of the server, a bit of an inconvenience.
It's a windows server 2003 btw.
Thank you,
Cris

Hi,
Thank you for posting in Windows Server Forum.
Good to hear that you go it working.
In respect to your another question, it seems that you want to have with smart card technique for password without entering manual credential. Please check following article for information.
Smart Card and Remote Desktop Services
http://technet.microsoft.com/en-us/library/ff404286(v=WS.10).aspx
Guidelines for enabling smart card logon with third-party certification authorities
http://support.microsoft.com/kb/281245
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Access Denied to report file on Windows Server 2003 Enterprise

Hi,
I have a deployment problem for which I am out of ideas. I have an ASP.NET web site deployed on a server running Windows Server 2003 R2, sp2. It makes extensive use of Crystal Reports, including both displaying them and e-mailing them to specified recipients as PDF files. It all works great.
Now I need to port the web site to a different server, running Windows Server 2003 Enterprise, sp1. The reports display fine as long as I am not trying to convert it to PDF for e-mailng. When it gets to the following line in my code:
MemoryStream memStream = (MemoryStream)rptDoc.ExportToStream(ExportFormatType.PortableDocFormat);
It reports the following error:
Access denied.Error in File JobDetails {DC64A5D3-9DD7-4E4C-90F5-A08731409B29}.rpt:
Access to report file denied. Another program may be using it.
I finally got it to work by granting Modify permission to Everyone for the c:\Windows\Temp folder. Obviously this is not a good practice. Granting Full Control to the IUSR_servername account did not solve the problem on Windows Server Enterprise, although it did the trick on R2.
So the question is, which account needs which permission to the Temp folder to enable the PDF to get written?
Thanks.
Dan

What ever account the app is running under will need read / write permissions on the temp folder. Your working server should be a good place to look to see how the premissions were set there. The same will apply to any other server(?).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Unable to bind MacBook Pro (running 10.6 - Snow Leopard ) to Windows Server 2003 domain

Hi there, I've been working on this problem for a few hours now (and a few hours last Thursday) and don't feel I'm getting anywhere, so I'm reaching out for help....
My organisation has just purchased a new MacBook Pro, running Snow Leopard (OSX 10.6) and as a Technical Support Engineer I have been asked to configure it for an end user.
I am currently trying to join it to our corporate domain, which is a Windows Server 2003 domain operating at the Windows Server 2003 Native domain functional level.
The MacBook is configured to use DHCP, and has been assigned valid IP address, DNS servers etc by the DHCP server. It can resolve all names on our network, including the names of our domain controllers. When I use nslookup to resolve the name of the domain "my_domain.local" it returns a list of DC's on the domain, which would indicate to me that name resolution is working perfectly. It is using our primary DNS server, 'Ponus' to resolve these names - Ponus is also the Domain Controller in this site.
To attempt to join the MacBook to the domain I have created a computer account for it on the domain, in the Computers container. I have gone into System/Library/Core Services and run the Directory Utility.
In the directory Utility I have ticked Active Directory and clicked on it to edit. The 'Forest' field is greyed out and set to 'Automatic', in the 'Domain' field I have entered my_domain.local, which is the FQDN of my domain. I click Bind and when prompted enter my Domain Admin username and password (in the 'Create Computer Account in:' field it displays correctly as CN=Computers,DC=my_domain,DC=local.)
When I click OK I get the message: Invalid domain. An invalid Domain and Forest combination was specified. You should enter a fully qualified DNS name for the domain and forest (e.g., ads.company.com).
I have attempted writing the domain as my_domain.local, my_domain.local., MY_DOMAIN.LOCAL and MY_DOMAIN.LOCAL. but I get the same error each time. I have checked and rechecked DNS is resolving OK, and cannot see why it cannot find the Domain and Forest from the FQDN that I am entering. Even so I tried creating records in the hosts file on the MacBook to point to the main Domain Controller at this site (Ponus) but this didn't change anything.
I have seen a few people report the same issue online but the responses tend to fizzle out before anyone gets to the bottom of it. I have seen some indication that people with an understore (_) in their domain name, or with a .local domain name may experience issues with joining Mac hosts, however these details are very vague and if true there must be a workaround.
If anyone could help me with this I would greatly appreciate it, I'm running out of time to complete this work and have run out of things to try.
I have an inkling that this is due to the Mac for some reason not reading the SRV records for the DCs and LDAP in DNS, or to do with the Mac looking only at one SRV record (ie. there is one for a new DC that we haven't deployed yet), not being able to reach this and giving up, but I'm clutching at straws really with my limited knowledge of the Macs process for joining the domain.
Many many thanks,

Hi there,
A simple suggestion , please make sure both MacBook Pro clock and the server clock are the same meaning the hour/Min/ sec both should match. A least difference of 3 seconds is fine.
I had faced this problem in many place and only solution was to match the time and it will bind immediatly.

New Windows server 2003 Hyper-V guest fails to boot

Hello,
I'm currently doing some virtualization experiments on my new server hardware. The host hardware is:
IBM x3650 M4
x2 Xeon E5-2609
32GB RAM
x2 480 GB SSDs
Server OS: Windows server 2012
I'd like to test some legacy app virtualization. I've configured a VM and have installed Windows server 2003. The install is done via DVD. The issue at hand is that after the initial installation, the server fails to boot. The VM goes into a reboot loop
and so far the only error logging I'm able to find is in the hosts event log.
Log Name: Microsoft-Windows-Hyper-V-Worker-Admin
Source: Microsoft-Windows-Hyper-V-Worker
Date: 7/8/2014 2:14:48 PM
Event ID: 18560
Task Category: None
Level: Critical
Keywords:
User: NT VIRTUAL MACHINE\A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D
Computer: CCSTS1.cnet2k.cornerstonecredit.net
Description:
'LegacyTS' was reset because an unrecoverable error occurred on a virtual processor that caused a triple fault. If the problem persists, contact Product Support. (Virtual machine ID A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>18560</EventID>
<Version>0</Version>
<Level>1</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-07-08T21:14:48.544007000Z" />
<EventRecordID>159</EventRecordID>
<Correlation />
<Execution ProcessID="1512" ThreadID="3536" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>CCSTS1.cnet2k.cornerstonecredit.net</Computer>
<Security UserID="S-1-5-83-1-2698121124-1264104059-3615998341-769460811" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>LegacyTS</VmName>
<VmId>A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D</VmId>
<Rax>0x0</Rax>
<Rbx>0x0</Rbx>
<Rcx>0x0</Rcx>
<Rdx>0x0</Rdx>
<Rsp>0x804de00c</Rsp>
<Rbp>0x0</Rbp>
<Rsi>0x0</Rsi>
<Rdi>0x0</Rdi>
<R8>0x0</R8>
<R9>0x0</R9>
<R10>0x0</R10>
<R11>0x0</R11>
<R12>0x0</R12>
<R13>0x0</R13>
<R14>0x0</R14>
<R15>0x0</R15>
<Rip>0x80547c7c</Rip>
<Rflags>0x10046</Rflags>
<FpControlStatus>7F030000000000000000000000000000</FpControlStatus>
<XmmControlStatus>0000000000000000801F0000FFFF0000</XmmControlStatus>
<Cr0>0x8001003d</Cr0>
<Cr2>0x804ddffc</Cr2>
<Cr3>0xa02000</Cr3>
<Cr4>0x20</Cr4>
<Cr8>0xf</Cr8>
<Xfem>0x1</Xfem>
<Dr0>0x0</Dr0>
<Dr1>0x0</Dr1>
<Dr2>0x0</Dr2>
<Dr3>0x0</Dr3>
<Dr6>0xffff0ff0</Dr6>
<Dr7>0x400</Dr7>
<Es>0000000000000000FFFFFFFF2300F3C0</Es>
<Cs>0000000000000000FFFFFFFF08009BC0</Cs>
<Ss>0000000000000000FFFFFFFF100093C0</Ss>
<Ds>0000000000000000FFFFFFFF2300F3C0</Ds>
<Fs>00F0DFFF00000000FF1F0000300093C0</Fs>
<Gs>0000000000000000FFFFFFFF00000000</Gs>
<Ldtr>00000000000000000000000000000000</Ldtr>
<Tr>90685580000000006800000050008B00</Tr>
<Idtr>000000000000FF0700F4038000000000</Idtr>
<Gdtr>000000000000FF0300F0038000000000</Gdtr>
<Tsc>0x148e4294</Tsc>
<ApicBase>0xfee00900</ApicBase>
<SysenterCs>0x0</SysenterCs>
<SysenterEip>0x0</SysenterEip>
<SysenterEsp>0x0</SysenterEsp>
</VmlEventLog>
</UserData>
</Event>
My VM config
<?xml version="1.0" encoding="UTF-16" standalone="yes"?>
<configuration>
<_24984ed0-bdad-4b90-82b2-5d59f874e91e_>
<ChannelInstanceGuid type="string">{E4E9CD0E-4BBF-4C1B-B655-715781690655}</ChannelInstanceGuid>
</_24984ed0-bdad-4b90-82b2-5d59f874e91e_>
<_7d80d3db-61ee-4879-8879-5609f1100ad0_>
<address type="string">5353,00000000,00</address>
<version type="integer">1</version>
</_7d80d3db-61ee-4879-8879-5609f1100ad0_>
<_83f8638b-8dca-4152-9eda-2ca8b33039b4_>
<controller0>
<drive0>
<pathname type="string">E:\Hyper-V\VHD\LegacyTS.vhdx</pathname>
<pool_id type="string"></pool_id>
<type type="string">VHD</type>
</drive0>
<drive1>
<pathname type="string"></pathname>
<type type="string">NONE</type>
</drive1>
</controller0>
<controller1>
<drive0>
<pathname type="string">SCSI\CDROM&VEN_IBM_SATA&PROD_DEVICE_81Y3681\4&1864BF9E&0&010000</pathname>
<pool_id type="string"></pool_id>
<type type="string">ISO</type>
</drive0>
<drive1>
<pathname type="string"></pathname>
<type type="string">NONE</type>
</drive1>
</controller1>
<version type="integer">5</version>
</_83f8638b-8dca-4152-9eda-2ca8b33039b4_>
<_8e3a359f-559a-4b6a-98a9-1690a6100ed7_>
<port0>
<connection type="string"></connection>
</port0>
<port1>
<connection type="string"></connection>
</port1>
<version type="integer">2</version>
</_8e3a359f-559a-4b6a-98a9-1690a6100ed7_>
<_8f0d2762-0b00-4e04-af4f-19010527cb93_>
<controller0>
<drive0>
<pathname type="string"></pathname>
<type type="string">VFD</type>
</drive0>
</controller0>
<version type="integer">1</version>
</_8f0d2762-0b00-4e04-af4f-19010527cb93_>
<_a80e9c62-750a-4a6b-9548-d46677e806be_>
<ChannelInstanceGuid type="string">{23c9c636-93de-4aec-9bef-220766177a24}</ChannelInstanceGuid>
<Connection>
<AltPortName type="string">Dynamic Ethernet Switch Port</AltPortName>
<AltSwitchName type="string">Intel(R) I350 Gigabit Network Connection - Virtual Switch</AltSwitchName>
<AuthorizationScope type="string"></AuthorizationScope>
<ChimneyOffloadWeight type="integer">0</ChimneyOffloadWeight>
<Feature_C885BFD1-ABB7-418F-8163-9F379C9F7166>
<DisplayName type="string"></DisplayName>
<Flags type="integer">0</Flags>
<Setting_97274751-A1EC-4DC2-941D-B7F9A1AED814>
<Data type="bytes">AAIAAGQAAAAAAAAAAQAAAAAAAAA=
</Data>
<Version type="integer">256</Version>
</Setting_97274751-A1EC-4DC2-941D-B7F9A1AED814>
<Settings>
<Id type="string">97274751-A1EC-4DC2-941D-B7F9A1AED814</Id>
</Settings>
</Feature_C885BFD1-ABB7-418F-8163-9F379C9F7166>
<Features>
<Id type="string">C885BFD1-ABB7-418F-8163-9F379C9F7166</Id>
</Features>
<HostResources>
<HostResource type="string">8758EB1A-9687-41FC-9319-AE867D46BA5C</HostResource>
</HostResources>
<PoolId type="string"></PoolId>
<PreventIPSpoofing type="bool">False</PreventIPSpoofing>
<TestReplicaPoolId type="string"></TestReplicaPoolId>
<TestReplicaSwitchName type="string"></TestReplicaSwitchName>
</Connection>
<FriendlyName type="string">Network Adapter</FriendlyName>
<IsConnected type="bool">True</IsConnected>
<MacAddress type="string">00-15-5D-01-18-02</MacAddress>
<MacAddressIsStatic type="bool">False</MacAddressIsStatic>
<PortName type="string">E7F02418-A1EB-4FF9-84F8-BF461B2D00C6</PortName>
<SwitchName type="string">8758EB1A-9687-41FC-9319-AE867D46BA5C</SwitchName>
<VpciInstanceGuid type="string">{E9444985-111B-404A-82FE-48608A397676}</VpciInstanceGuid>
</_a80e9c62-750a-4a6b-9548-d46677e806be_>
<_ac6b8dc1-3257-4a70-b1b2-a9c9215659ad_>
<base_board>
<serial_number type="string">9595-3600-2199-6834-7686-3927-30</serial_number>
</base_board>
<bios_guid type="string">{B54BE7B5-05A4-4C4A-A2BD-D63272C7CCCD}</bios_guid>
<bios_serial_number type="string">9595-3600-2199-6834-7686-3927-30</bios_serial_number>
<boot>
<device0 type="string">Optical</device0>
<device1 type="string">HardDrive</device1>
<device2 type="string">Network</device2>
<device3 type="string">Floppy</device3>
</boot>
<chassis>
<asset_tag type="string">8437-8592-0329-9603-9215-1886-12</asset_tag>
<serial_number type="string">9595-3600-2199-6834-7686-3927-30</serial_number>
</chassis>
<num_lock type="bool">False</num_lock>
<version type="integer">2</version>
</_ac6b8dc1-3257-4a70-b1b2-a9c9215659ad_>
<_db8b9818-b4bb-4725-b99d-b4612716b6b4_>
<version type="integer">0</version>
</_db8b9818-b4bb-4725-b99d-b4612716b6b4_>
<global_settings>
<devices>
<allow_reduced_fc_redundancy type="bool">False</allow_reduced_fc_redundancy>
<generation_id type="string">883d11122d9b7b2c521be0c045ef3760</generation_id>
<storage_allow_full_scsi_command_set type="bool">False</storage_allow_full_scsi_command_set>
</devices>
<disk_merge_pending type="bool">False</disk_merge_pending>
<metrics>
<devicetype>
<deviceinstance>
<guid type="string">B637F346-6A0E-4DEC-AF52-BD70CB80A21D</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">B637F347-6A0E-4DEC-AF52-BD70CB80A21D</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">3F6F1051-C8FC-47EF-9821-C07240848748;0</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">B637F346-6A0E-4DEC-AF52-BD70CB80A21D</guid>
</devicetype>
<devicetype>
<deviceinstance>
<guid type="string">4764334D-E001-4176-82EE-5594EC9B530E</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">394DCE66-458F-4895-AE56-41D7C9602A49</typecode>
<value type="integer">0</value>
</metric>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">FF85EA46-9933-4436-BE5D-C96827399966</typecode>
<value type="integer">0</value>
</metric>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">04BDF59E-580D-4441-8828-FFFE44472D2D</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">4764334D-E001-4176-82EE-5594EC9B530E</guid>
</devicetype>
<devicetype>
<deviceinstance>
<guid type="string">83F8638B-8DCA-4152-9EDA-2CA8B33039B4</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">70BB60D2-A9D3-46AA-B654-3DE53004B4F8</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">AD29978B-AAB6-44AE-81CD-0609BF929F18;0\0\L</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">83F8638B-8DCA-4152-9EDA-2CA8B33039B4</guid>
</devicetype>
</metrics>
<owner>
<sid type="string">S-1-5-21-1940488291-1951097212-1584025624-1392</sid>
</owner>
<power>
<host_shutdown>
<action type="integer">1</action>
</host_shutdown>
<host_startup>
<action type="integer">1</action>
</host_startup>
</power>
<snapshots>
<list>
<size type="integer">0</size>
</list>
</snapshots>
<unexpected_termination>
<action type="integer">1</action>
</unexpected_termination>
<vhd_path_acled type="bool">True</vhd_path_acled>
</global_settings>
<manifest>
<size type="integer">11</size>
<vdev001>
<device type="string">58f75a6d-d949-4320-99e1-a2a2576d581c</device>
<flags type="integer">1</flags>
<instance type="string">58F75A6D-D949-4320-99E1-A2A2576D581C</instance>
<name type="string">Microsoft Synthetic Mouse</name>
</vdev001>
<vdev002>
<device type="string">197f74e3-b84b-46de-8ae6-82f1cd181cdc</device>
<flags type="integer">1</flags>
<instance type="string">197F74E3-B84B-46DE-8AE6-82F1CD181CDC</instance>
<name type="string">Microsoft Synthetic Keyboard</name>
</vdev002>
<vdev003>
<device type="string">f3cf6965-e8d3-44a9-9b7d-a04245ea7525</device>
<flags type="integer">1</flags>
<instance type="string">F3CF6965-E8D3-44A9-9B7D-A04245EA7525</instance>
<name type="string">Microsoft Synthetic Video</name>
</vdev003>
<vdev004>
<device type="string">84eaae65-2f2e-45f5-9bb5-0e857dc8eb47</device>
<flags type="integer">1</flags>
<instance type="string">84EAAE65-2F2E-45F5-9BB5-0E857DC8EB47</instance>
<name type="string">Microsoft Heartbeat Component</name>
</vdev004>
<vdev005>
<device type="string">2a34b1c2-fd73-4043-8a5b-dd2159bc743f</device>
<flags type="integer">1</flags>
<instance type="string">2A34B1C2-FD73-4043-8A5B-DD2159BC743F</instance>
<name type="string">Microsoft Key-Value Pair Exchange Component</name>
</vdev005>
<vdev006>
<device type="string">9f8233ac-be49-4c79-8ee3-e7e1985b2077</device>
<flags type="integer">1</flags>
<instance type="string">9F8233AC-BE49-4C79-8EE3-E7E1985B2077</instance>
<name type="string">Microsoft Shutdown Component</name>
</vdev006>
<vdev007>
<device type="string">2497f4de-e9fa-4204-80e4-4b75c46419c0</device>
<flags type="integer">1</flags>
<instance type="string">2497F4DE-E9FA-4204-80E4-4B75C46419C0</instance>
<name type="string">Microsoft Time Synchronization Component</name>
</vdev007>
<vdev008>
<device type="string">5ced1297-4598-4915-a5fc-ad21bb4d02a4</device>
<flags type="integer">1</flags>
<instance type="string">5CED1297-4598-4915-A5FC-AD21BB4D02A4</instance>
<name type="string">Microsoft VSS Component</name>
</vdev008>
<vdev009>
<device type="string">6c5addb9-a11a-4e8e-84cb-e6208201db63</device>
<flags type="integer">1</flags>
<instance type="string">6C5ADDB9-A11A-4E8E-84CB-E6208201DB63</instance>
<name type="string">Microsoft RDV Component</name>
</vdev009>
<vdev010>
<device type="string">2fc216b0-d2e2-4967-9b6d-b8a5c9ca2778</device>
<flags type="integer">1</flags>
<instance type="string">A80E9C62-750A-4A6B-9548-D46677E806BE</instance>
<name type="string">Synthetic Ethernet Port</name>
</vdev010>
<vdev011>
<device type="string">d422512d-2bf2-4752-809d-7b82b5fcb1b4</device>
<flags type="integer">1</flags>
<instance type="string">24984ED0-BDAD-4B90-82B2-5D59F874E91E</instance>
<name type="string">Synthetic SCSI Controller</name>
</vdev011>
<version type="integer">260</version>
</manifest>
<properties>
<global_id type="string">B37E54CD-FFBB-44DA-8B7C-322B922EAD72</global_id>
<highly_available type="bool">False</highly_available>
<last_powered_off_time type="integer">130493284127496105</last_powered_off_time>
<last_powered_on_time type="integer">130493284065876653</last_powered_on_time>
<last_state_change_time type="integer">130493284127496105</last_state_change_time>
<name type="string">LegacyTS</name>
<notes type="string"></notes>
<type_id type="string">Virtual Machines</type_id>
<version type="integer">1024</version>
</properties>
<settings>
<global>
<logical_id type="string">B37E54CD-FFBB-44DA-8B7C-322B922EAD72</logical_id>
</global>
<memory>
<bank>
<dynamic_memory_enabled type="bool">True</dynamic_memory_enabled>
<limit type="integer">1048576</limit>
<priority type="integer">5000</priority>
<reservation type="integer">512</reservation>
<size type="integer">4096</size>
<target_memory_buffer type="integer">20</target_memory_buffer>
</bank>
<vnuma>
<max_size_per_node type="integer">14770</max_size_per_node>
</vnuma>
</memory>
<processors>
<count type="integer">1</count>
<features>
<limit type="bool">False</limit>
</features>
<limit type="integer">100000</limit>
<limit_cpuid type="bool">False</limit_cpuid>
<reservation type="integer">0</reservation>
<vnuma>
<count_per_node>
<max type="integer">4</max>
</count_per_node>
<node_per_socket>
<max type="integer">1</max>
</node_per_socket>
</vnuma>
<weight type="integer">100</weight>
</processors>
<stopped_at_host_shutdown type="bool">False</stopped_at_host_shutdown>
<vnuma>
<enabled type="bool">False</enabled>
</vnuma>
</settings>
</configuration>
If its relevant, the host is not yet activated license wise. I downloaded the demo version so I could test my idea before making a purchase to go ahead with full implementation.
As it stands right now I'm not sure how to troubleshoot this. Many searches on google have not turned up any helpful info. Does anyone have any ideas?
Thanks,
D

Hi ,
First , please refer to the supported guest OS of windows 2012 hyper-v :
http://technet.microsoft.com/library/hh831531.aspx
2003/R2 should be with sp2 and max 2 virtual processors .
"'LegacyTS' was reset because an unrecoverable error occurred on a virtual processor that caused a triple fault."
If the issue is not due to the above items , you can try to check the "CPU compatibility " in that VM settings for troubleshooting:
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I add a Mac to a Windows Server 2003 or 2008 domain?

I recently started working for a public school district that runs Windows Server 2003 and Windows Server 2008 R2. There are several faculty members, myself included, that would like to get their Macs onto the domain and capable of file sharing, printing to network printers, etc. I cannot find decent instructions anywhere. Could someone please point me in the right direction or give me some directions? It would be greatly appreciated. Thanks.

I'm also new to the MAC world - I trust you were able to join the MAC's to the domain - I finally figured it out. However, I have not been able to get the MAC's to save to the Windows 2008 server where I have student folders setup. Have you been able to do this? If so can share the info with us.
Thanks,
Steve
[email protected]
Newport School District

TS140 Windows Server 2003?

Similar Messages

Maybe you are looking for