TS1424 Error 306

Can someone update on 306 error when connecting to iTunes stores......." I tunes not connect to I tunes store. An unknown error has occurred (306)"

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Similar Messages

TS1424 Error 306 if you can help please

Hi i keep getting this error message evrytime i try to access the store if anyone knows how to fix this i would appreciate that also how do i switch store as i currently work in Abu Dhabi and when i try to purchase something it says you have to switch to the uk store
Thanks

krystennicole, the thing with the Zen Micro (and other players, too) is that they use playlists. This means that it doesn't matter if you got 000 songs in it, it won't play anything that's not in the playlist.
Now, you JUST loaded up your songs, and you have an empty playlist. What you need to do is add all your songs to the playlist to be able to listen to them. Later you can make playlists for separate genres if you like, but let's concentrate on what you want to do now: Listen to your music.
Not sure if this is stated in the manual of the ZM, but here's a quickstart.
Go to Music Library, and select All Tracks. Scroll to the one you'd like to begin with, and click Play. Now, all your songs will be loaded into the "Now Playing" list, and you'll be able to listen to all of them!

TS1424 i'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

I'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Itunes cannot connect to iTunes store error 306

Hi, I think I originally posted this on the wrong forum. So I will repost and hope for the best.
Up until recently I used to connect to the internet via airport and everything worked fine. I could connect to iTunes store no problem.
The connection was all set up by the local phone company and somehow they connected the iMac to airport via a modem.
I know that this appears to defeat the point of airport but it worked fine.
I had connection problems with the modem (it was old and needed replaced) that was attached to the airport and iMac. I arranged for the telephone company to come and replace the modem. However, although they replaced the modem and the internet connection is fine.
What they did not do was to reconnect the Airport device and now I cannot connect with iTunes store. Now instead of connecting to the internet via the Airport connection I now connect via Ethernet
The error message I get is
"iTunes could not connect to the iTunes store. An unknown error occured (306).
Make sure your network connection is active and try again."
I think that if someone could advise how I stop trying to connect to the iTunes store via Airport but via an Ethernet connection
iMac intel Mac OS X (10.6.6)

iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US

Error 306 won't let me download songs

when i purchased songs from itunes, the songs were bought but when i try to download them it comes up with error 306
then itunes started to redownload my songs for some reason and comes up with error 306 aswell.
now i know that there are solutions for error 306. tried them all none of them work for me.
please help. i really want to listen to the songs that i've bought.

Hi hanel13,
Welcome to Apple Support Communities!
The suggestions in the article below should help resolve any issues that would be preventing iTunes Store purchases from downloading correctly.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
-Jason

Printing from Mac Book Pro to windows printer Error 306

Error 306
I tried several setups before I figured this out.
Trying to print to windows printer
Mac Book Pro / Canon MX 870 resulted in print error 306.
Home network with Linksys wireless N router
First delete the printer on the Mac.
Make sure you go to Canon's website and download latest driver for your Mac. Canon's software driver site detects your operating system automatically and takes you to the driver you need, just make sure everything matches up. You can see the OS version you are using by clicking on the apple icon and then (about this mac)
I also down loaded network tool package. Not sure if you need it, but I loaded it too.
Now on the Canon MX870, go to the wireless set up menu. (key pad on the printer itself). Follow the promts and you will get to where you can enter your network password and get your printer to connect to your router. Now the wireless Icon on the printer will be on steady.
Now back on the Mac, Click the Apple Icon, System Preferences, then click on printers and scanners.
You will see, Default- Scanner- IP- Windows, icons at the top of the page. Just be sure the default is highlighted.
My Scanner came up first, then a few seconds later the printer appeared.
Select the printer
Use the one with all the numbers after the printer name. (MX870xxxxxxxxxxx)
Canon U Network
Click on it and then click the add button bottom right
Make sure your are always in good wireless signal strength throughout the entire process.
Hope this helps.
Lou

Thanks for the detailed info Lou!

TS3297 I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US

Airport Extreme Printer: Error 306

I have just upgraded my Airport Extreme firmware to Version 5.3.1 (531.9) and suddenly my Canan MP160 printer having problem. It prints a few lines and then stops with Error 306. I have tried to removing the printer, adding it again, updating the driver, resetting my iMac - all did not work.
Any help would be appreciated.

just went through the same issue, and did the same things. Then, I restarted my airport extream and then deleted the bonjour printer, readded, and named it something new, and voila!
give it a try.

Error 306 when accessing itunes store

I am unable to access the store. One day it worked, the next it didn't.
I have tried to log on using another log on, same problem. I next downloaded the current version and it still gives me the error message 306, the connection timed out. It usually gets about half way before it stops.
Thanks
rudybacon

I saw this posted. I did as it instructed and shazzam!
It worked. The answer was posted by nantes37 of the UK.
Thank them, not me. It works without any commercial
download.
I posted this twice and saved it for the future.
I often need reminding of these things! lol!
kentvee
nantes37
Posts: 2
From: UK
Registered: Oct 18, 2009
Re: iTunes 9 - Unknown Error 306 solution
Posted: Oct 18, 2009 1:42 PM in response to: axanth
Launch Internet Explorer
Click the Tools menu
Select Internet Options
Click the Connections tab
Click the LAN Settings button
Make sure that that "Use a proxy server for your LAN" checkbox is unchecked
Click OK till you are out of everything, and then close Internet Explorer
Try again in iTunes to load the store
Windows Vista
nantes37
Posts: 2
From: UK
Registered: Oct 18, 2009
Re: iTunes 9 - Unknown Error 306
Posted: Oct 18, 2009 1:44 PM in response to: axanth
This worked for me
Launch Internet Explorer
Click the Tools menu
Select Internet Options
Click the Connections tab
Click the LAN Settings button
Make sure that that "Use a proxy server for your LAN" checkbox is unchecked
Click OK till you are out of everything, and then close Internet Explorer
Try again in iTunes to load the store

Error 306, error 306

I am connected to the internet, when i do diagnostics in itunes it shows this on the first 2 categories and then on the third category says i am not connected. Error message 306 keeps coming up. I am using firefox in windows 8, how can i resolve this.

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Error 306, wrong number or types of argument in call to ADD_OBJECT_ARG

Hello all,
I am trying to install Webutil to Forms 9i, but when compiling the webutil.pll, I am getting the compilation error 306, wrong number or types of argument in call to ADD_OBJECT_ARG(args, a0, 'java/lang/Object').
The problems are in the body of Package Jave_System when some methods of JNI are called.
What is JNI and how i can fix this problem?

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Instructor:
The procedure most likely requires an argument when executed.
To specify the argument in forms, you need to go to BLOCK property QUERY DATA SOURCE ARGUMENTS and if performing DML...use INSERT PROCEDURE ARGUMENTS, UPDATE PROCEDURE ARGUMENTS, and DELETE PROCEDURE ARGUMENTS.
Hope this helps.<HR></BLOCKQUOTE>
thanks, I will check it out !
null

WHILE expression giving Error 306, wrong number or types of args in call to

WHILE expression giving Error 306, wrong number or types of args in call to '='
declare
     block_id block;
     item_id item;
begin
     block_id := find_block(:system.cursor_block);
     item_id := find_item(:system.cursor_item);
     message('Current Block: ' || :system.cursor_block || ' Current Item: ' || :system.cursor_item);
     next_block;
     while find_block(:system.cursor_block) = block_id
     loop
          message('Current Block: ' || :system.cursor_block || ' Current Item: ' || :system.cursor_item);
          next_block;
     end loop;
exception
     when others then
     message(sqlerrm);
end;I don't see what the problem is?
Gus

other than that there are logical errors in this
u hav to use here != with the while loop.
Again loop willl never return to first block.It will stuck at last block and will show error.
For ur question u can use as
declare
     --block_id block;
     --item_id item;
     vc_first_block varchar2(65);
begin
     vc_first_block := :system.cursor_block;
     --block_id := find_block(:system.cursor_block);
     --item_id := find_item(:system.cursor_item);
     message('Current Block: ' || :system.cursor_block || ' Current Item: ' || :system.cursor_item);
     next_block;
     while :system.cursor_block != vc_first_block
     loop
Message was edited by:
jeneesh

TS3694 How do I resolve error 306?

When I try to update an APP which is greater than 50MB I get an error 306 about iTunes server not being available. Thanking you in advance.

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Form Builder. Error 306 wrong number or types of arguments in call to populate_table

Hi ! I'm trying to build a simple form based on a procedure.
the error that i get:
error 306 - wrong number or types of arguments in call to populate_table
When I use the Data block
wizard, I specify the procedure with a ref cursor argument. the procedure code:
open ind_prof for select i.nome, i.idade, p.nome
from individuo i, individuo_profissao ip, profissao p
where i.cod_individuo=ip.cod_individuo
and ip.cod_profissao=p.cod_profissao;
The error that i get 'points' to this procedure. I checked the cursor type, the record
type and everything seems ok.
I'm using a ref cursor to query.
I have the same proble either using a procedure or a function.
There is another method to load the data into the block. That procedure is called
automatically and it has a table of the same record type as the ref cursor as an
argument. What code should I write on it ?
what should I write in both of them ?
Thanks !

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Instructor:
The procedure most likely requires an argument when executed.
To specify the argument in forms, you need to go to BLOCK property QUERY DATA SOURCE ARGUMENTS and if performing DML...use INSERT PROCEDURE ARGUMENTS, UPDATE PROCEDURE ARGUMENTS, and DELETE PROCEDURE ARGUMENTS.
Hope this helps.<HR></BLOCKQUOTE>
thanks, I will check it out !
null

Can anyone assist me on Error 306?

I have installed iTunes 10.6 on my Windows XP. I have also downloaded music files etc. When I try and access the iTunes Store from my XP laptop, I get the Error message "iTunes could not connect to the iTunes Store (306). Make sure your netowrk is active and try again". However, my network is very much active. Rebooting the laptop has not helped. Can anyone help me understand why I am getting this error, and what I can do to overcome it? If I uninstalll and reinstall, will my downloaded music files get wiped out?

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

TS1424 Error 306

Similar Messages

Maybe you are looking for