TS1424 error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!
i get error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!
Did you forget the passcode?
http://support.apple.com/kb/ht1212
http://support.apple.com/kb/ht1808
Similar Messages
-
Never before have i ever updated my iphone off the computer, there has been issue with backs up. So i went to back up my iphone 4s, it needed to be updated. so i updated it, during the update something had occur and my iphone 4s screen says connect to itunes be it wont connect???? i tried so many things. Ps this is my mom and she needs it
we have itunes off a PCHello there, Nunesie.
It sounds like your iPhone is not being recognized in iTunes by your computer. The following Knowledge Base article provides some great, in-depth steps for troubleshooting that issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If after following the above steps, the issue persists, then the following article helps with completing the update/restore:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How do you turn your ipod touch on when the screen says connect to itunes?
How do you turn your ipod touch on when the screen says connect to itunes?
You connect the iPod to your computer with iTunes and restore via iTunes. If iTunes does not see the iPod try:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
or
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
If iTunes asks for the passcode and you can't enter it or if iTunes does not see the iPod, manually placing the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
Trying to restore, now at a grey screen saying connect to itunes.
I dont know what to do. I forgot the password so i restored it. Now its at a grey screen and saying connect to itunes. I did connect and nothing happened. So i rebooted it and nothing happened. What do i click on? Do i need to restore again?
http://support.apple.com/kb/HT1808
-
Today I updated, thru itunes, my iphone4, and restored backup, but am stuck in setup loop. After few screens of setup phone says "connect to itunes" or "connected to itunes". I turned off the phone and turned back on - still stuck. Help, please?
Unable to Update or Restore...?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
It won't pick up that my iPod is connected to iTunes whenever I plug it in.
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, try restoring on another computer. -
and it gets worse.. a computer you can use when the phone is synced to a brand new download of itunes states .... needs your passcode to sync with itunes ???? help iphone states connect to itunes - itunes needs passcode to sync with itunes - iphone states connect to itunes becuase ... passcode is locked out ..
You will have to restore as new.
iPhone and iPod touch: Unable to update or restore -
i have error when i connect to itunes
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
My Iphone 3 gs is restarting, and a screen to connect to Itunes.When I connect, and restoration, in order to process the information appears: "An unknown error occurred in the restoration(-1)". Help me please!
That is a baseband error. Has your phone ever been illegitimately unlocked? If so, that problem happens. If you haven't jailbroken/unlocked, visit your local Genius Bar.
-
2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??
Hi Peter,
Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much. -
When updating my iphone with new software it came up on screen with the cable and itunes sign (which is what I should get when restoration has been completed) yet it is still saying restore. I have tried 3 times and the screen won't change. HELP!
If the sign does not go away it has not completed the restore. So you are incorrect when you say it "keeps completing the restore" if that message is still displayed.
Do you get an error message? If so, what is the error number? -
My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?
Try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, try restoring on another computer. -
My photosmart c4280 has an error and the screen says to turn power off and then on again.
my photosmart c4280 has an error and the screen says to turn power off and then on again
Please try temporary connecting your printer to some other power socket, without using any power extention or hub.
If the same issue persists, contact the local HP Support center, as it seems like and hardware or Power Supply problem.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
My ipods screen says connect to itunes, so i connect it and nothing happens the same screen stays on, it will not get off that screen. I know my cord works because when i plug it in it says charging. What do i do?
Restore your ipod
-
after installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now. no change with firewall.
== This happened ==
Every time Firefox opened
== yesterday, after installing the upgrade ==
== User Agent ==
Opera/9.80 (Windows NT 5.1; U; en-GB) Presto/2.5.24 Version/10.54I'm using Mac OS 10.4.11 & even typing this message the characters appear so slowly that I could get a hammer and chisel and inscribe the words faster than the new Firefox runs. WTF?
Maybe you are looking for
-
I recently upgraded to ios7 and now my PC is not recognizing my iphone
I am having several problems. I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone. 1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You
-
ORA-01031:Insufficient Privileges error when I am trying to use ALERT_QUE
Hi, I am working on SYS.ALERT.QUE for getting system alerts. I am using ODP in C# for connecting to Oracle database with username = SYSTEM, but when I am trying to enque or deque any message from SYS.ALERT.QUE, its gives an error ORA-01031:Insufficie
-
Is this really a "bug" in dba_tab_columns?
Hi Guys, it's Xev. I have been struggling with this for weeks now. No matter what I do, I cannot get my procedure to see dba_tab_columns inside of my procedure at run-time. It just blows up and says "cannot see table or view", that generic answer. Is
-
ADHOC Query in Production System
Can I create a ADHOC query in Production system?Coz I can able to do that. Thanks Sriram
-
Impossible to use 30 days more FCPX trial version after re downloading it
How to do to use the possibility of : "If you're using a previous version of the Final Cut Pro X trial, you'll be able to use this version free for an additional 30 days." ?