TS1424 error message, what does this mean? MZCommerce.CreditBalanceMismatch.Mobile_message

MZCommerce.CreditBalanceMismatch.Mobile_message
What does this mean?  Will not let me purchase music.

anche io devo aggiornare il mio tom tom su I Phone ma mi dà il messaggio MZCommerce.purchasablesAssetTooBigForDownload_message
Non so proprio come aggiornare allora le mie mappe....
Bella storia questa!!!!
Se qualcuno mi sa rispondere gliene sarei grata visto che con Apple Store non riesco
Grazie

Similar Messages

  • Iostat -E error messages, what does this mean?

    Good Day,
    st3 Soft Errors: 199 Hard Errors: 11 Transport Errors: 3 Vendor: SUN Product: DLT4700 Revision: CC2E Serial No: Q.
    Because there is hard errors, does this mean something wrong with the tape drive?
    By the way, which instance/driver in "prtconf" show me the scsi controller information ?
    sbus, instance #0 (driver name: sbus)
    SUNW,CS4231 (driver name: audiocs)
    auxio
    flashprom
    SUNW,fdtwo (driver name: fd)
    eeprom (driver name: eeprom)
    zs, instance #0 (driver name: zs)
    zs, instance #1 (driver name: zs)
    sc
    SUNW,pll
    espdma, instance #0 (driver name: dma)
    esp, instance #0 (driver name: esp)
    sd (driver name: sd)
    st (driver name: st)
    sd, instance #0 (driver name: sd)
    sd, instance #1 (driver name: sd)
    sd, instance #2 (driver name: sd)
    sd, instance #3 (driver name: sd)
    sd, instance #4 (driver name: sd)
    sd, instance #5 (driver name: sd)
    sd, instance #6 (driver name: sd)
    st, instance #0 (driver name: st)
    st, instance #1 (driver name: st)
    st, instance #2 (driver name: st)
    st, instance #3 (driver name: st)
    st, instance #4 (driver name: st)
    st, instance #5 (driver name: st)
    st, instance #6 (driver name: st)
    lus, instance #0 (driver name: lus)
    ledma (driver name: ledma)
    le (driver name: le)
    SUNW,bpp (driver name: bpp)
    SUNW,hme, instance #0 (driver name: hme)
    SUNW,hme, instance #1 (driver name: hme)
    SUNW,fas, instance #0 (driver name: fas)
    sd (driver name: sd)
    st (driver name: st)
    sd, instance #7 (driver name: sd)
    sd, instance #8 (driver name: sd)
    sd, instance #9 (driver name: sd)
    sd, instance #10 (driver name: sd)
    sd, instance #11 (driver name: sd)
    sd, instance #12 (driver name: sd)
    sd, instance #13 (driver name: sd)
    sd, instance #14 (driver name: sd)
    sd, instance #15 (driver name: sd)
    sd, instance #16 (driver name: sd)
    sd, instance #17 (driver name: sd)
    sd, instance #18 (driver name: sd)
    sd, instance #19 (driver name: sd)
    sd, instance #20 (driver name: sd)
    sd, instance #21 (driver name: sd)
    st, instance #7 (driver name: st)
    st, instance #8 (driver name: st)
    st, instance #9 (driver name: st)
    st, instance #10 (driver name: st)
    st, instance #11 (driver name: st)
    st, instance #12 (driver name: st)
    st, instance #13 (driver name: st)
    lus, instance #1 (driver name: lus)
    SUNW,UltraSPARC
    pseudo, instance #0 (driver name: pseudo)
    thanks.

    I just got a new Mac and wanted to transfer my old iTunes library to it.  After a night of attempting to import the old library to the new Mac it said that the library was damaged and subsequent restarts yielded the 13010 error.  I deleted everything listed, did a number of iTunes reintalls and the only thing that has allowed iTunes to continue is to dig up a backup library (which is in progress now).  Barring this working, how can I get it so that iTunes boots again as if it is factory fresh?

  • I have a new hp 2050 printer and received a 10.0000 supply memory error message. what does this mean

    I have a new hp 2050 printer and received a 10.0000 supply memory error message. Can anyone tell me what this means and how to fix it?

    mickeymackey, this error looks similar to a related error code that I found for laserjets. Here is a summation of that error code:
    http://goo.gl/W7dP6
    This describes the problem as being a cartridge error, in which case I would follow the instructions in this document and see if that resolves the issue:
    http://goo.gl/h6hWz
    that does not resolve the issue, then I would recommend performing a hard reset of the printer. This would involve unplugging the printer for thirty seconds from both the back of the unit as well as from the outlet it is plugged into and then plugging the machine back in and powering it on.
    A few additional questions are: Is this printer plugged into a surge protector, wall outlet or battery backup? The ink you are using, are they original HP cartriges or have they been refilled before?
    Let me know!

  • Error Message - What does this mean

    Hi all
    I was burning more than one copy of a DVD using DVD SP when I received an error message communicating a failure write to DVD.
    Initially I assumed it was a DVD media error [faulty disk] however when I changed to the second internal DVD burner using the same blank DVD media the error message did not come up again. In addition I had also tried a second blank DVD disk in the first internal DVD burner and it also failed... It may be a bad batch of blank DVD disks however I have never encountered two in a row, let alone the rarity for me of finding one +in a row+. Could it be the burner?
    Here is the error:
    The recording device reported the media error: Unknown device error.
    ...and a second error message came up after collapsing the first error message window stating that:
    Formatting failed
    The recording device reported the media error: Unknown device error. (0x73, 0x03.)
    Your thoughts and participation is greatly appreciated?
    Regs

    As you mentioned it could be a bad disc or a bad batch of discs. Your machine is new, so even though it could be the drive I would look at the discs first. (Dirty drives or drives going bad can act real weird, being able to burn the DVD but not actually read it back and other things.)
    But first check out this thread about discs and how the can behave which came up in the last day or so. Even though it is a DL there, the same thing can happen with SL. (Even discs sitting in a spindle for awhile can start going bad.) I have never had an issue with the Taiyo Yuden I mention in this thread
    http://discussions.apple.com/thread.jspa?threadID=1386393&tstart=0

  • Itunes error message-what does this mean????

    My eMac stopped working so I had to do an archive and reinstall. I did all the software updates and tried to play my purchased music in itunes. It said I had to authorize my computer and enter my password. I did and it gave me this error- "Could not complete your itunes store request. A required itunes component is not installed. (-42404). I checked and I have the latest version of itunes. I even tried to re-create my itunes library and that didn't help.
    Does anyone have any suggestions? Or am I out of luck?

    Remove iTunes and reinstall iTunes.
    Removing iTunes for Mac OS X
    http://support.apple.com/kb/HT1224

  • DiskWarrior Error Message - What does this Mean??

    Maybe this has been touched on, but I can't find it. I get this message when I try to repair permissions with DiskWarrior 4.1 on Mac Pro with 10.5.5. It's always worked before, but now?? I can rebuild directory OK, I can check all files and folders, etc. with DW. I can also Repair Permissions OK with Disk Utility, and repair disk with DU. Everything but permissions. I've booted from a Clone and ran DW from that to my target HD. I even zapped the PRAM. Any ideas??
    http://i35.tinypic.com/2us8ysl.png

    yvonnejim wrote:
    Maybe this has been touched on, but I can't find it. I get this message when I try to repair permissions with DiskWarrior 4.1 on Mac Pro with 10.5.5. It's always worked before, but now?? I can rebuild directory OK, I can check all files and folders, etc. with DW. I can also Repair Permissions OK with Disk Utility, and repair disk with DU. Everything but permissions. I've booted from a Clone and ran DW from that to my target HD. I even zapped the PRAM. Any ideas??
    http://i35.tinypic.com/2us8ysl.png
    I got that error just once, when running permissions from the computer, before the CD arrived. The second time I ran it I got no error. I think I had some programs open/running at the time.
    You might ask alsoft about it, unless others here have a fix or have seen the same error.

  • Error message, what does this mean: Itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

    I'm trying to connect my iPAD to my desktop but I receive an error: itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

    have you done a update for your itunes this can be the problem that it will not connect to you ipad so update you itunes and then try it again

  • HT1751 On an old Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean?  And how do I work around it?

    On an older Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean?  And how do I work around it?

    I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
    I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

  • While trying to burn a CD of a playlist, the disc was ejected with the message: medium write error. What does this mean?

    While trying to burn a CD of a playlist, the disc was ejected with the message "medium write error" . What does this mean and how do I fix it?

    I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
    I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

  • OSStatus error -9459 what does this mean?

    OSStatus error -9459 what does this mean? Can't make my slideshow export to desktop in order to burn DVD. Did it last night. Won't work this morning. Am stuck at the point where the slideshow exports to desktop as a m4v . I did this last night and then changed it to a mpg and burned it to a DVD without any problem. Now I keep getting the above error message. What gives?

    Google's your friend. A search for error 9459 yields many hits. Peruse them.

  • Trying to erase hard drive, but get "input/output error". What does this mean? What can I do to erase my hard drive so I can reinstall?

    Hi all,
    My computer a few days ago wouldn't start up, would just stay at the gray loading screen forever. So as a result I tried to reformat the hard drive and reinstall, but I can't reinstall, until I erase the hard drive, but when I try to erase the hard drive it says the erase failed due to an input/output error. What does this mean? What can I do to fix my computer?

    The startup drive is failing, or there is some other internal hardware fault.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Getting same error message - 1st time ever having a problem witn iTunes.  Tried to re-install iTunes but that just got another error message.  Does this mean I have lost everything.

    Getting same error message - 1st time ever having a problem witn iTunes.  Tried to re-install iTunes but that just got another error message.  Does this mean I have lost everything.

    Have a look at the articles mentioned  here:http://support.apple.com/kb/TS3694
    Unknown Error containing "0xE" when restoring: To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

  • I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore.  I can't find any information on error 1413, what does this mean?

    I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore.  I can't find any information on error 1413, what does this mean?

    Now it keeps saying that it is restored but there is still no music or video on it. And a new error is coming up that says "We could not complete your iTunes store request.The iTunes Store is temporarily unavailable. Please try again later."

  • DSPPublishing error -29. what does this mean... I'm trying to burn to DVD

    DSPPublishing error -29. what does this mean... I'm trying to burn to DVD

    It means – more or less – that the job action (burning the disk) failed.
    Sometimes this happens because the app doesn't like something about a background image that is to be used in the menu. If you have such an image, reduce its dimensions. If you don't have one, in Settings in the dialog, cick Add and then Cancel.Some people have found that that alone is enough to kickstart the job action.
    Russ

  • Error -50  what does this mean?  i cant download two items i purchased.

    error -50 what does this mean?  i cant download two items i purchased!

    Must be a temporary glitch...seems to be up and running again.

Maybe you are looking for

  • Login in problems after installation of ecc6.0

    Hi, I have successfully installed the SAP ECC 6.0 without any error .I have set my password for all user as admin123.Now I am not able to login to sap for first time with ddic or even sap* username.Please provide me hlep on this.I tried the default p

  • How to change the responsible in a service order

    Hi. Does anyone know how to change the responsible in a service order? I am working on CRM7 Thanks Rob

  • Problem in importing request

    Hi All, I installed new system ECC 6.0 with EHP1 ready on Windows 2008 cluster environment and Oracle 10g database. The installation completed successfully and fail-over is also happening perfectly. I did STMS and there is no inconsistency as well. I

  • NVL and no rows returned

    Hi, i found a little error in coded in an SQL-Construct equivalent to this one: SELECT NVL(dummy, 'A') from dual where 1=2 This will return nothing instead of the expected 'A', because in my understanding no rows are returned and though no NULL could

  • After computer crash, creative cloud shows applications as not installed

    My computer (running windows 7 64 bit) crashed, and after reboot most of my adobe apps (photoshop, premiere etc) disappeared from the installed apps list. The actual applications run fine, but they are not in the Creative Cloud window, so I cannot up