TS1424 Getting an mzcommerce error on iTunes. Any ideas?
Getting an mzcommerce error on iTunes. Any ideas?
What was your mzcommerce error? Mine was saying asset to big for download.. If u have any inputs thanks..
Similar Messages
-
I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message. Any ideas?
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer". Any ideas on how to resolve?
See:
iOS: Troubleshooting backup issues in iTunes
Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one. -
I am trying to update to i-tunes 11.3 but when I download I get a message that itunes didn't install properly, and a reference to error 127. Any ideas?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
when I try to load a new version of itunes on my windows XP pc I get a message that file MSVCR80.dll is missing as well as a windows error 126 message.
any idea what to do?Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
HT1451 Getting a -54 error while iTunes is adding content.
Getting a -54 error while iTunes is adding content. Any ideas on how to recify error. I am trying to rebuild the database without much luck. My media content is kept on a seperate drive than the system.
Thanks
JimThe CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .
-
While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??
The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .
-
When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
Any answers how to fix it? All Im getting is error for the past 3 days!
-
I continue to get r6025 runtime error with iTunes version 10.6.3.25. Have uninstalled and reinstalled twice. Happens when I search in iTunes Store. Ideas to fix?
Hi,
got it fixed! My Son had both files on his Win7 iTunes installation. Never mind he had no issues whith ths iTunes and iPhone Sync. So I checked my other Win XP PC, where I don't have this problem syncing my ipad, and surprise. Both files do NOT show up on this PC. So I renamed the iTunesPhotoProcessor.exe I found under c:\program file\iTunes and synced again my iPhone and it went through without any error. So the problem might be and unremoved iTunesPhotoProcessor.exe or the missing iTunesPhotoProcessor.dll under the iTunes install root folder and this even if I had checked that the folder was completely removed during iTunes unistall.
Please try yourselve and just rename the iTunesPhotoProcessor.exe to iTunesPhotoProcessor.exe_ under c:\program file\iTunes or get a copy of the missing iTunesPhotoProcessor.dll and cp to c:\program file\iTunes. -
I am trying to update to iOS5 but keep getting a 9006 error message. Any suggestions?
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Try this - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update.
Cheers, Tom -
ITunes fails to install with error Ox800736FD. Any ideas?
iTunes fails to install with error Ox800736FD. Any ideas?
Trying to install on a Acer Aspire-- no CD/DVDOx800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?) -
My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
When trying to connect to the itunes store on my MacBook Pro, I get the following error message: "iTunes could not connect to the iTunes Store. An unknown error occurred (-54) Make sure your network connection is active and try again."
I've had the same problem for a month and yet I still cant get iTunes to work, I've heard different solutions but none have worked for me
This may or may not work for you but its worth a try even though it didnt seem to work for me, Good Luck!
Control Panel
Internet Options
Connections Tab
Click LAN Settings
Uncheck "Use A Proxy Server" -
Since upgrading to Lion my address book no longer communicates with iTunes? This means that no new information is getting to my iPhone etc? Any ideas? Thanks
Nathan Miah wrote:
Is there absolutely anything else I could do to sort this such as phone Apple Support
If you want.
or maybe install Snow Leopard using the disc it came on with my Mac and just set it up from a Time Machine Backup on my external hard drive (since it works under SL)?
Did you install Lion on an empty partition, or did you upgrade Snow Leopard? If you upgraded, I'd not recommend erasing it, since your backups are apparently gone. It's doubtful Snow Leopard will recognize them.
It's not just backups on the drive either, there are other important things on there, so why won't they show?
Mixing Time Machine backups and other data is not a good idea. See #3 in Time Machine - Frequently Asked Questions. It sounds like the whole disk is corrupted.
I just really don't understand how this happened. Could it not be an issue with WD because they haven't issued firmware to support Lion yet?
If this is a simple external HD, connected by USB or FireWire, no, unless you installed some of WD's software on it. That shouldn't prevent it from being seen at all, but anything's possible. -
I tried to update my iPhone4's, but get the following error message: iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.
The solution will be found here, select your computer type and software.
http://support.apple.com/kb/TS2529
Maybe you are looking for
-
Keyboard and trackpad freeze after being idle for a few minutes
I have a early 2008 MBP and just today the keyboard and trackpad freeze after not using it for a few minutes. I was at work when it happened. I plugged it in and started doing something else and a few minutes later came back and i couldn't move the
-
My printer is Hp printer 932C it will only print in black and white not color
my printer is Hp printer 932C it will only print in black and white not color I got a new color cartage nothing still only printing in back and whit what can i do
-
I deleted some data to free up icloud and it still says full what can i do?
i have a 4s and my screen cracked i am goin to the apple store to get another phone but my icloud stated its almost full, i had a replacement phone since march and the backup was last 3/27/13 along with the new phone but my current phone has not been
-
Inporting Files From PageMaker to InDesign CS3
How do I import files from Microsoft PageMaker to InDesign and so that I dont lose any data.
-
BI 7.0 Business Content for EH&S
Hello, I've only found "healthcare" business content but it's more related to hospital management. Does anybody know if there are bi 7.0 business content for Labor Health in companies which aren´t hospitals or health centers. Thank you very much Best