TS1424 I have downloaded a series of prison break but 3 episodes are saying "you do not have permission to access the requested resource" and "this episode can not be downloaded at this time" any idea how to fix this please??
I have downloaded a series of prison break but 3 episodes are saying "you do not have permission to access the requested resource" and "this episode can not be downloaded at this time" any idea how to fix this please??
I got this error with my iPad 3, my wife's iPhone 4, but not with my iPhone 4s.
Similar Messages
-
I have tried restoring factory settings and loading the preferences I saved before updating the OS.
Neither of these methods have any effect.
The ipod also seemingly prevents you from restarting the ipod using the earlier OS software when resorting from recovery mode.
Any other ideas?
Cheers
Dan- Downgrading the iOS is not supported by Apple.
- When restoring to factory defaults/new iPod fails to resolve a problem that indicates a hardware problem and an appointment a the Genius Bar of an Apple store is in order. -
Today I tried listening to music on my iPhone 4S, only to find that my volume adjuster had disappeared. And just to clarify, when I say that it disappeared, I mean that when I press the volume buttons on my phone, I see the speaker icon but the gauge bar is gone. I can't hear music or watch videos
Hi thecrane1137,
If you are having issues with the sound on your iPhone 4S, you may find the following article helpful:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
- Brenden -
I can't figure out what is talking up space on the memory.
Make sure all of the files actually are deleted from the hard disk and that the trash is emptied.
-
I am using a T61 ThinkPad with an external hard drive and my itunes library keeps disapearing but remains on the external drive. Any idea how to fix this so my music doesn't disapear all the time? It's a real drag pulling music back into iTunes each week
In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"
-
I have a red "i" message - The backup disk image “/Volumes/_________’s Time Cap/Macintosh.sparsebundle” is already in use.
Any idea how to fix this?Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue 98% of the time. If you are in the unlucky 2% category, more help is here:
The Backup disk image ... sparsebundle ... is already in use. -
I have an iPad mini 16g. It has started jumping through different pages of it's own accord, any ideas how to fix this please?
I recommend starting with a soft reset (pressing both home and power button until you see the apple then let go of the buttons) once you back on the home screen if you iPad still doing the same thing you may want to try a back up and restore
http://support.apple.com/kb/ht1766 to back up
http://support.apple.com/kb/ht1414 to restore -
Please instert disk photoshop CS5 to continue. Disk is already in. Any idea how to fix this?
Are you installing from the DVD? If so then please try copying the install files to your desktop and install from there.
-
I keep getting error -1202 when trying to connect to itunes store, any idea how to fix this?
ThanksPerhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message. -
my iphone went into recovery mode for some reason and is unable to be restored. it wont turn on and when plugged into a charger it shows a usb and itunes symbol. so i plugged it into my mac and connected to itunes then itunes said it has detected a phone in recovery mode and needs to be restored. so it goes through the restoration process for a couple minutes or so then stops and says itunes is unable to restore because an unknown error occurred (2001) or (2006) and other times i try it says its unable to restore because itunes cant detect the device... any ideas how to fix this?
Errors 2000-2009 (from Apple support): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604. If the issue persists, it may be related to conflicting security software.
2001: Use up to date software. Make sure your device is in DFU Mode: http://www.iclarified.com/entry/index.php?enid=1034
2006: Use a different USB cable. Possibly the one that came with your iPhone. -
My iphone 5 will no longer sync to Microsoft Outlook 2010. Any ideas how to fix this?
My iphone 5 will no longer sync to Microsoft Outlook 2010. Any ideas how to fix this?
Hi jenmik,
Welcome to the Apple Support Communities!
If you are having issues syncing your iPhone to Microsoft Outlook 2010, please read over and use the information provided in the attached article to assist you in troubleshooting.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010 - Apple Support
Cheers,
Joe -
When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out. Any ideas how to fix this?
This is asked and answered many time each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again. -
HT204389 siri quit working in notes. Any ideas how to fix this problem?
Siri quit working in notes. It still works from the main screen.Any ideas how to fix this problem?
Yes I do spend a lot of time in China but I have had problems in other countires as well. I am in China right now.
I have two Gmail accounts and one Cox account. Cox is my intranet provider back home. I have had problems with all three accounts.
I have tried several outgoing port settings. 993, 995 465, 587 are some that I can remember trying.
Sometimes my accounts will go offline without me doing anything. This is all a mystery to me. I don't have any idea why I have trouble like this. A few minutes ago I changed my Cox account outgoing port and took the account on line and I got my incoming email but when I tried to forward an email that I got it would not go out.
Any ideas you have would be helpful. -
My clips don't appear. They appear as blue boxes.
I have to click through them to reveal them each time I need to do an edit... which slows up the process on a big edit right now.
Any ideas how to fix this?
With thanks,
SteveI may have solved my own issue. I clicked on one of my clips (or you can click on all your clips for that matter) in the event browser, opened the inspector tab and clicked on the 'Info' tab, then the 'settings' drop down at the bottom of the inspector window. I then clicked on 'apply custom name' and then clicked 'original name from camera'.
So far all my thumbnails are visible and I've been working for 1hr since my last post with no thumbnails going BLUE on me. They are all still visible. Give it a try and let me know if it works for you.
Best Regards.
Maybe you are looking for
-
Camera lock screen iPhone 5S not working properly after upgrade to iOS 8.1.3
Actually, i upgrade my iPhone to 8.1.3. What i am trying achieve is, when my iPhone is locked i just need to access my camera without login. When i open camera when my iPhone is locked, camera displays for 2 seconds and then my screen will be black.
-
Back to My Mac and multiple iCloud accounts
I have an iMac at home and a Macbook I travel with. Previously I had just one mobileme account, and BTMM has worked like a champ. I now have multiple iCloud accounts in my household, as my wife mostly uses the iMac and I have the macbook. I very m
-
Regarding Batch Jobs for migration of data from client DB to our local DB
Hi Folks, GoodDay, Previously I worked as a Oracle Developer and recently shifted into a BIG organisation as PL?SQL developer. Here my base work is with INTERFACES(Stored Procedure). That is retrieving data from client DB and need to put the data in
-
i iphone is showing an error 0xE800005 the logo starts turning in itself for hours. What should I do?
-
ScrnXtra - Trying to save to Windows as BMP; getting error -10
Hello Fellow Director hanger-on-ers! I have a question on awesome cast member to output ScrnXtra v2.2.0. Am trying to save screen shot of the stage to a file (bmp). The OS that is not working for me is Windows 7 using Director 11.5. Tested on Mac