TS1424 I usually listen to a full 30 seconds of a song if I think I want to buy it just to make sure. All of a sudden I am only getting a 5 second clip so I've stopped buying for now. Ideas?
I usually listen to a full 30 seconds of a song if I think I want to buy it just to make sure. All of a sudden I am only getting a 5 second clip so I've stopped buying for now. Ideas?
Depending on which country's store you are in, the previews are supposed to be either 30 or 90 seconds.
The last few days there have been several posts here that they are not getting the full preview. There is certainly no setting to control that, so I suppose the problem is at the store.
My suggestion is to try again in a few days, or to purchase from another online music download retailer.
Similar Messages
-
I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks
Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message -
I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?
Hi Mary,
I don't remember those arrows in 10.6, only 10.7 & up!?
I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved all the way to the left. Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
By wuzradioman here...
https://discussions.apple.com/thread/4218928?start=0&tstart=0 -
I have been listening to iTunes radio for a few months. All of a sudden I cannot hear any music stations. I can hear the ads when they come on, but not the music. Any suggestions?
Both Firefox and IE have the same problem. The cursor instead of being a finger when pointing to a link is still an arrow. However I can click anywhere on the page and an ad will pop up. I have eliminated all unwanted bars in Firefox, I ran Malwarebytes until it came out clean. I also have AVG which had detected a few items on it's own. But when I get into Firefox I still have exactly the same problem. Now it will not let me download Browser Safeguard. Usually after one click the pointer returns to normal for a few screens. When I try to click to download Browser Safeguard it keeps bringing up different ads or it tries to get me to upgrade Firefox or some other browser helper program which I know are all BS tactics to get me to load their junk again. PLease help I'm an engineer and pretty good with PCs but this one has me beat at least so far.
-
HT4991 Using keynote and stop updating for now
I have an IPAD 2 and tried updating the keynote on a wi fi connection but had to leave and now i can' t use the keynote till i get a wifi connection once again
And i need to use the keynote now and it says waiting and i can't open it or use it, how can i stop the waiting of downloading and resume laterBefore you do any of the resets below try this first.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
Here are the descriptions for the different reset settings:
Resetting iPad Reset all settings: Choose General > Reset, then tap Reset All Settings. All your preferences and settings are reset. Information, such as your contacts and calendars, and media, such as your songs and videos, aren't deleted.
Erase all content and settings: Choose General > Reset, then tap “Erase All Content and Settings.” This resets all settings to their original values and erases all your information and media.
Reset network settings: Choose General > Reset, then tap Reset Network Settings. When you reset network settings, your list of previously used networks and VPN settings not installed by a configuration profile are removed. Wi-Fi is turned off and then back on, disconnecting you from any network you're on. The Wi-Fi and “Ask to Join Networks” settings remain turned on. To remove VPN settings installed by a configuration profile, choose Settings > General > Profile, then select the profile and tap Remove.
Reset the keyboard dictionary: Choose General > Reset, then tap Reset Keyboard Dictionary. You add words to the keyboard dictionary by rejecting words iPad suggests as you type. Tap a word to reject the correction and add the word to the keyboard dictionary. Resetting the keyboard dictionary erases all words you've added.
Reset the Home screen layout: Choose General > Reset, then tap Reset Home Screen Layout.
Reset the location warnings: Choose General > Reset, then tap Reset Location Warnings.
Message was edited by: David M Brewer -
nothing has ever happened to this ipod so idk help
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
and
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My MG6220 stopped scanning all of a sudden. I cannot get it to work
Here is a copy of the message I've been getting. I've tried an different computer on my network, but I get the same error message. It seem to print fine.
Solved!
Go to Solution.Hello nakamotog!
Welcome to the Canon Forums and thanks for your post!
To have a better understanding of your issue, please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X) you are using and if you are connected via USB or WI-FI. That way, the community will be able to assist you with suggestions appropriate for your product.
Any other details you'd like to give will only help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks! -
Adobe Reader 11.0.09 stops responding for 30 seconds after start
When starting AR 11 (either via it's Icon or via a .pdf document), AR starts normally but after a few seconds the interface freezes and stops responding for around 30 seconds. Logging the start-up with Process Monitor gives the output below (actually two instances, only one is shown). When the second instance times out (I'm guessing that is what's going on), AR11 starts responding again.
The whole problem disappears if the plugin Weblink.api is removed, with the unfortunate side effect that the Tools pane on the right also disapperas (replaced with a spinning Icon but AR11 is otherwise responding well).
The server that AR11 is installed on does not have any Internet access whatsoever. My guess is that AR11 is looking for the host above for some reason and need to time out before it is available for use. This is of course an extremely poor design and we wish to resolve it somehow.. Ideas anyone?
/PatrikSolution found. By enabling a lockdown feature, we prevented Adobe from trying to muck about getting online. Actually NSA provides recommendations on how to lock down Adobe Reader, google "NSA recommendations for configuring Adobe Reader XI in a Windows Environment". We only used:
HKLM\Software\Policies\Adobe\<product>\<version>\FeatureLockDown\cCloud
bDisableADCFileStore REG_DWORD Set to 1 -
WiFi Issues - Stops working all of a sudden - Ipod 4 32G
I wanted the community to be aware of an issue that hit me all of a sudden - my wifi connection on my iPod cease to stop working.
I have a iPod Touch 4, 32G, Windows 7 w/Netgear DSL modem & Router
Today, I was surfing the net with my iPod when all of a sudden I was disconnected. I tried to connect to back but was having problems. As time went by and nothing was happening, I was getting a little worried. My Wii, internet, my wife's iPhone and my 1st &2nd Gen iPods touch's were all connected and working normally but mine was not. I did absolutely everything possible. I went to the user forums and surfed all over to find a solution. In my research, I found that I wasn't the only one that was having this same issue. The only problem was there was no consensus on a solution.
After resetting, deleting, downloading and just about everything else you could do with an iPod, I decided to see if it was my router. I went into my router and set up a "guest" account and all of a sudden my iPod 4 could connect. I then reset my router and it is now working perfectly.
A lot of pain and trouble but the solution was just to reset the modem (in my case, I unplugged it).
This seems to be a strange issue with the iPod 4 as I am not the only one who has been hit with this issue. It has not affected any of my other apple devices except my iPod 4. There is something in how the iPod 4 and the router communicate and the easiest way is to restart your router (all other options did nothing for me)
Hopefully this will help someone out and prevent them from going through all the pain I did.Hi, this seems like a very annoying problem. Unfortunatly, the community will need some more information to help assist you with this problem. Such as:
1) What programs? Are they resource intensive? I mean, if you are trying to run 4 video games or programs like photoshop and 3dsmax forget about it. And if you have 4 programs ALL attempting to write large amounts to the disk it will yeild a similar result. Usually large amounts of I/O are murder on PC's (by which I mean personal computers...), and of course if you don't have enough RAM its a moot point.
2) What are your specs? How much RAM do you have? What is the size of your virtual memory (page file)?
3) Have you cleared the various caches mac's have? I can't direct you to any good third party programs for mac's but I am sure there is a simple cache cleaner within your system. -
Lightroom not a one-stop shop for Pro Photographers
The claim to fame purports to make this a one-stop processing shop for Photographers.
Most photographers prefer to send their post-processed files to the lab. And if they really know their stuff, they are probably profiling their images to the lab printers. This is where LR fails miserably.
To make my point, I will start off by explaining how RawShooter worked (RawShooter was purchased by Adobe and after major surgical procedure sold as Lightroom):
For Rawshooter:
1. Open the RAW file.
2. Choose the profile of the printer I wish to use for the final output. This results in a significant color shift to the image as seen on the screen. After all, the benefit of the profile is to ensure that What You See Is What You Get (WYSIWYG).
3. Make changes to the image so that the final output is to your liking. (remember, the RAW files themselves are never modified. All you do is create offset points and save that data seperately)
4. Export to JPG
5. Send image to the lab with an assurance that WYSIWYG.
With Lightroom:
1. Open the RAW file
2. No ability to choose a printer profile.
3. Make changes to the image with no idea how the final output is going to look. (remember, the RAW files themselves are never modified. All you do is create offset points and save that data seperately)
4. Export to JPG
5. Send image to lab with the hope you like what you get (HYLWYG)
So, LR cannot be a one-stop shop for processing and printing RAW files. Any one who understands the importance of printer profiles would demand a WYSIWYG image to which one can apply the changes.
Rawshooter was much better at this.My chip was largely from the way the Pixmantec acquisition was handled. I think everyone felt that was a real issue. George and Tom (and probably others) started the turnaround with the announcement of the freebie for RSP users.
The other issue was that there really wasn't much for Windows users at the time (which was every RSP user). B3 came out and was pretty, umm..., in need of help. Then B4 came out and we started to see how fast the team was working. B4 was impressive from that standpoint, but a disaster in another way - it would only run for 5-10 minutes at a time before crashing for me. That was frustrating because I could see the improvements, but not use the tool. But the fact that we had started to see movement in a positive direction (instability not withstanding) started to turn attitudes around, at least for me.
Since I've been a tester I've seen more first hand how dedicated and hard working the team actually is. 1.0 was far from perfect, either from a QE standpoint or from a feature standpoint. But it's more movement. When you see two positive changes in a short time, you start to see a pattern.
I still see both detail and fundamental problems with LR. But now I'm just trying like crazy to help the team move forward, one little bit at a time, in what little way I can. Given the team's dedication, I have no doubt that we'll get "there" (wherever that is) as long as they get continued support from Adobe management.
I still think you jump on people too quickly, Jeff. I think you should give people one strike (like you did with me) instead of calling them out after the first one. Answer an overly-aggressive post with kindness. If you get more flames back, then that's different. But sometimes you get useful information instead. You never get that when you respond with flames! You're too darned useful for us little guys not to be getting the full benefit of your experience. -
Songs that I have had previously downloaded from various other sources, but NOW ALL of a sudden they DO NOT PLAY on my IPHONE and DISPLAY a RED STOP BUTTON in a red round circle next to the title. Everytime I click on it it DOESNT play. What happen???? How can i get them to play., Why should i have to pay for the songs, and why are they in the ITUNES store and not in my regular playlist.
Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
http://support.apple.com/kb/HT1535
Please let me know how things are going.
Cheers! -
How to stop validation for Back action in ADF
Hi,
In ADF form, I have a 'Back' button which should just go back to the previous page. But when I select 'Back' button, the form is validated again and I do get validation error messages.
How can I stop validation for these type of simple actions?
Please do let me know.
Thanks,
priya.SYou might find this blog post useful in finding a generic solution to your problem:
http://one-size-doesnt-fit-all.blogspot.com/2007/02/jdeveloper-and-art-of-rollback.html
CM. -
How to make sure mac is clean from "find my mac" before buying second hand?
Hello.
I plan to buy a mac second hand.
The original owner say he removed it from icloud's and wiped it.
So from what I understand, it should be completely disconnected from his apple id, from the internal firmware safety locks, and he will not be able to accidentally (or not) to lock or remote wipe it, ever. Is this correct?
I would like to know if there is a way to confirm this.
If I enter the mac, do a new wipe and reinstall just to make sure, insert my own iCloud and apple id, and turn on the "find my mac", and I won't get a message that the mac is already in someone else's list, this means that the mac is safe and isn't on anyone's list like a father, son, daughter who accidentally linked it or something.
I know the seller is the original owner. I just want to make sure the iCloud and apple id are no longer linked to the computer. Just on the safe side.
I just don't want any issues along the way in 2-3 years from now.
Thanks.You need to be able to see that Find My Mac is turned off. That is all you need to ensure.
-
my iPhone 4 stopped giving out sound..
On the left side of the phone above the volume + and - buttons there should be a toggle switch (silence switch) if you see orange/red that means your iPhone is in vibrate mode and will be quiet.
Switch the toggle so it shows no orange/red and that should correct the issue.
If you still get no sound after that you may want to check your bluetooth to make sure its not connected to another device (sound is being sent there) ...
If that doesn't work, stick some headphones into the headphone jack and see if you can hear the sounds from the headphones... the device may also think there is headphones plug'd in which can also be the issue
If the issue persists past that explore the option of restoring the device from the last time it did make sound and if that doesn't work you may need to contact Apple for other options
Hope this helps!
GL! -
Basically I want to combine to clips with correct timings. For that I want to view the two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.
see my reply in your other post:
You're familiar with the TRIM-tool?
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae
Maybe you are looking for
-
PR Release Strategy tab processor field is not getting displayed
Hi Experts, While creating Purchase Requisition, In the Release Strategy tab processor field is not getting displayed which should be showing the name of the user id which has been configured in the SPRO. SPRO--> Rel Proc for PR > Rel Group> Rel Code
-
Using Form to pass value to query parameters in the selct part of query
I created a form in Access 2007 to pass 2 values to an Access query. I am doing this to create delimited output (very large) with the parameters included in the selected data. The select works and is something like this: SELECT "^"+!FORM!EXPORT2DAT!
-
Can we call a bean in Weblogic 6.0 from Weblogic 5.1
Is it possible to call a (stateless session) bean deployed in weblogic 6.0 from a bean in weblogic 5.1? I have two versions of weblogic running on two different hosts and I have to call a bean that is running in 6.0 from 5.1. Are there any limitation
-
how do i change the language of my keyboard and autocorrect to write a text in spanish using the pages app?
-
I have a Application Form with many form fields and...
I need to edit some of the text. How do I do this without having to spend lots of time putting in the form fields again?