TS1424 purchased album won't play after buying on iphone.  How to fix?

I purchased an album from iTunes on my iPhone and when I go to play the album, it won't play and songs are skipped over until the album's complete.  How do i fix?  Should I get a refund and repurchase?  Thanks.

Welcome to the Apple Community.
I'd try redownloading it from the purchased section of the iTunes store first and see if that helps.

Similar Messages

  • Movies won't play after update to iPhone 2.1 Software

    Help. I updated my 16GB iPod Touch with the iPhone 2.1 software to support applications. But now, when I go back and try to play my mp4 and m4v movie files on my iPod touch, they won't play. When I try to play them I get a warning that says "this movie could not be played". Videos I purchased from iTunes continue to play just fine.
    Is this a new anti-piracy thing or something like that or am I having a problem with the iPhone 2.1 software? If I knew I wouldn't be able to watch my old movies and TV shows, I wouldn't have upgraded to 2.1.
    Thanks for your help.

    Just a quick update on my issue... which seems different than most.  To summarize, I tried updating from iTunes 10.6 directedly via USB.  Got an empty progress bar when it "rebooted" after "successfully updating" to 5.1 with a memory allocation bar on itunes showing most the memory as allocated to "other", instead of the usual memory allocation to apps, music, pcits, etc.  Rebooted the phone, but still came up with an empty progress bar, but would connect to itunes.. showing booted as 5.1, but again the memory was still allocated to "other".  Started recovery process on itunes to try to bring back my old config, after which the iphone fully booted (into 5.1), but was completely.... recovered and re-installed all my apps, music, etc without a hitch and rebooted successfully, this time the memory allocation was correctly labeled, but somewhere I gained 2.0 GB of memory, even with all the same apps and music installed.  I had to do some minor additional configurations (password lock had to be re-enabled), but otherwise, everything was working.  A bunch of apps lost their stored settings... which I though strange as I expected the "backups" to store those settings as well.   Otherwise, running 5.1 now without issues... seems much snappier than 5.0.1... but the process was nerve racking to say the least.
    Best of luck with other "explorers" tyring to make the whole process work.

  • My purchased songs won't play all the way through. how can i fix this?

    I purchased a few albums from itunes and now when i play them, they cut off a minute into the song. Can anyone tell me why and how i can fix this problem?

    Solved (copy and pasted from my post) For others having this problem, delete the songs you have just purchased from itunes. Then, go to the store and in quick links click on "Purchased". Then find on the top right "Songs not on this computer" (or something similar) and you will find them for download. It's best to download them one at a time and wait for one to complete before moving on to the next one.

  • After updating to Yosemite, some tracks on purchased albums will not play.

    After updating to Yosemite, some tracks on purchased albums will not play.

    Hi klivak,
    If you are having difficulties with playing certain tracks purchased from the iTunes Store in iTunes, I would suggest deleting those songs and then downloading them again. See this article -
    iTunes 11 for Mac: Download previous purchases from the iTunes Store
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Certain albums won't play on Iphone but still play perfectly fine in Itunes

    Since I updated my Iphone to IOS5, certain albums won't play. They work perfectly fine in Itunes on my imac and the still appear in my library on the Iphone, but it won't start playing. The strange thing is, they are all albums from this year. All the rest is working properly.
    Allready tried importing the whole library again but that was a waste of time.

    Having the same problem with only a few albums.
    Any news on this issue?

  • My apply tv won't play after it did a update

    My apply tv won't play after it did a update

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Imac won't play songs from my iPhone after I have authorised the computer

    Imac won't play songs from my iPhone after I have authorised it

    My solution was restoring my iPhone. Techs at Apple couldn't figure out why so I had to do a restore and worked after that. I know it's a pain and you have to reinstall all you stuff, but it worked for me. Hope this helps.

  • One album won't play on my iPhone 4S

    One album won't play on my iPhone 4S running iOS 7.0.3. If select a song and click Play it flashes through the whole album with the play/pause button switching back and forth between play and pause - as though it played the whole album but all the songs were zero length.
    I deleted all the songs in the album then re-synced from iTunes - same problem.
    The tracks are Apple Lossless (ALAC) as are most of my tracks.
    They were ripped from CD as FLAC and converted to ALAC using XLD - the same as with many of my CDs all of which play fine.
    All the tracks on the album play OK in iTunes and if I connect my phone to PhoneView I can play the files on the phone so the music files themselves are OK.
    Also, most importantly, these tracks used to play fine
    Looking at the music file dates in the iTunes library they were imported in August this year so would have been under iOS6. I can't remember when they stopped playing (I tend to use Shuffle most of the time) but could it be related to the iOS7 u/g, even though it doesn't seem to affect any other album?
    I've found quite a few threads about non-playing music but none of them are exactly this problem.

    GAJF wrote:
    I have this issue as well and I am already on iOS 7.0.4. 
    Appears to be only on the apple lossless tracks added mid november via Itunes sync.
    Please help.
    I too u/g to 7.0.4 but the problem persisted. I even did a factory reset and restore of my iPhone without success.
    I then grabbed a copy of Max and re-converted the FLACs, deleted the album from iTunes and my phone, re-imported the new ALACs et voilà problem solved.
    So it seems that it was something to do with the version of XLD I used and playing the resulting ALACs on iOS7 (although the album definitely played a couple of times under iOS6).
    The only reason I rip to FLAC then convert to ALAC is that the rMBP doesn't have an optical drive and the only one I have is in a Linux box but I don't think there are any Linux rippers that rip to ALAC.
    If Max had failed, the last resort would have been to try and borrow a USB optical drive and rip with iTunes.

  • TS1389 Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Hi Deb,
    Deauthorizing all is definitely the way to go.  You will just need to authorize your computer again after, as well as your husband's.
    Here's some additional information on deauthorizing all:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/ht1420
    I hope this helps!
    - Ari

  • How do I fix it when an album won't play on my ipod but will in itunes?

    How do I fix it when an album won't play on my ipod but eill in itunes?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • HT4623 Can I move a purchased album from my ipad mini to my iphone 4s?

    Can I move a purchased Album from my ipad mini to my iphone 4s?

    No, you cannot move content from one iGadget to another. What you can do is download the content onto the other device, either from the iTunes Store directly or from your Library stored in the computer where you have installed iTunes. There is a limit to how many different iGadgets you can download a single purchase to, the magic number being four (4), IIRC.

  • Is anyone else having sensory issues since updating to the IOS 7.1.1? My phone is all over the place when trying to scroll or play a game. Know how to fix? It didn't do this till after this update.

    My phone is all over the place when trying to scroll or play a game. Know how to fix? It didn't do this till after this update.

    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • HT1926 Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix

    Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix?

    Hi Richmoller51,
    Welcome to Apple Support Communities.
    See this article for some troubleshooting steps that can help with video playback in iTunes or Quicktime:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Best,
    Jeremy

  • HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

    HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

    System Preferences > Displays.
    De-select "Automatically adjust brightness"

  • I have the 2nd Gen iPad and imported my photos from my computer to my iPad awhile back. Now I'd like to sync it to new MacBook Pro and my albums are not showing up? Anyone know how to fix this?

    I have the 2nd Gen iPad and imported my photos from my computer to my iPad awhile back. Now I'd like to sync it to new MacBook Pro and my albums are not showing up? Anyone know how to fix this?

    You'll have to transfer them from the pc to the mac.
    There are some options
    Importing personal photos & videos from device to  your computer
    http://support.apple.com/kb/HT4083?viewlocale=en_US&locale=en_US
    Managing photos/videos
    Iphoto app for iOS
    http://www.apple.com/support/ios/iphoto/
    photo manager pro
    https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8
    Photo transfer app
    http://www.phototransferapp.com
    Dropbox
    https://www.dropbox.com/referrals/NTMzMjg0NjkzOQ?src=global9
    Picasa
    http://picasa.google.com
    photo manager pro 
    https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8

Maybe you are looking for

  • Using XMLType in a Java Stored Procedure

    I have the following piece of java test code that attempts to read an XMLType object from the database. When I run this client side, using either the oci or thin driver it works fine. When I run the same code as a java stored procedure I get the exce

  • Successful install of 8.1.7 on Solaris 8 with more than 256Mb RAM

    To all who have struggled with this one, like me. You owe me a bottle of Rogaine.... but I will accept a bottle of Jack instead. It appears that the kernel parameters published in the Install Guide are only good for Solaris 8 with up to 256Mb RAM If

  • To set delay in process chain using a program

    Hi all, We have a requirement in which the loads from nearly 15 sources (DSO) gets loaded into the Cube thro 15 process chains. The source gets loaded from the PI interface. So it might happen that simultaneously 10 loads will be started and reach th

  • Condition type Inforecord & Pricing Procedure

    Dear All, I have maintained the new pricing procedure and assigned to the same Vendor schema which is maintained in VENDOR MASTER. If I create Inforecord and If select the condition type, it saying that condition is not maintained (It is refering for

  • Custom SDV03V02 taking too long

    Well, we've been having trouble with V_V2 t-code taking too long to process orders. So in order to fix that, we customized it into a Z-program to look at VAPMA-AUDAT and VAPMA-AUART to kinda narrow things down. I'm testing it right now as I write thi