TS1424 Some of my files are incomplete.

Some of my music files will only play until a certain time on the track 41 seconds for example and then will skip onto the next song. How can i correct this?

Maxine,
With the recent update of the Creative Cloud Desktop app (1.9.1.474) we unfortunately introduced a bug which causes the creation of a new Creative Cloud Files folder, and re-sync of all content. This will only occur the first time the sync application runs after the update. This has caused understandable pain and confusion, for which we truly apologise.
The Creative Cloud Files app contains logic that supports the use of multiple Adobe IDs. This allows you to sign out of one ID and in to another, but keeps your Creative Cloud content separate. When you sign out and change IDs, the app moves the previous Creative Cloud Files folder and it's contents and appends it with the previously signed in ID (User@AdobeID). It then creates a new main folder and starts to sync content of the new ID.
The bug which I mentioned previously occurs, as the app believes an ID switch has taken place and as such, moves the current Creative Cloud Files folder and tries to append the previously signed in ID. As no switch has actually taken place it manifests as (Unknown).  The app then creates a new main folder at syncs down the data.
Essentially what you end up with is a Creative Cloud Files folder with your newly sync'd data and a Creative Cloud Files (Unknown) folder that contains duplicate data.
This occurs once, after the last update completes.
The fix is to simply delete the Creative Cloud Files (Unknown) folder.
I would advise that you ensure you have no pending edits that you may have made offline and that you check the contents of the new, main Creative Cloud Files folder contains everything you expect it to.  If not, check the contents of the Creative Cloud Files (Unknown) folder.
If there is still a discrepancy with your data, you can check on creative.adobe.com to confirm your data is there.
If you have any further problems or questions about this particular issue please email [email protected]

Similar Messages

  • ITunes (11.3 64bit) cannot run because some its required files are missing. Please reinstall iTunes.

    just set up my new laptop lenovo x240.
    Windows 7 SP1.
    itunes 64bit 11.3
    first install went fine. then I tried to move my preexisting library. the library did not show the apps. so I tried around. Treid to re-install itunes.
    Since I did, after the re-install, iTunes gives me the error message "iTunes cannot run because some its required files are missing. Please reinstall iTunes."
    I tried the  -_> link: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    unfortunately it did not resolve. please, advise... I am quite desperate... and surprised this is happening, since I am on a clean corporate laptop.
    perhaps, can someone also steer me to a corner, where I can deactivate the cloud install pop-up ones starting iTunes?

    See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.

  • ITunes could not be installed because some of the files are missing, please

    I just bought an Iphone and when I went to install the latest version of itunes i get the message "iTunes could not be installed because some of the files are missing, please reistall iTunes" during the installation. I have tried every recommended solution I could find on the apple website. Does anyone know of a solution to this problem??

    A number of people seem to have had this problem, see this thread:
    http://discussions.apple.com/thread.jspa?threadID=1221432&tstart=0
    In the thread you will find a post from Royb of Apple inviting people to send in installer logs. It might be an idea to take advantage of that.

  • HT201272 Help! i purchased a cd and some of the songs are incomplete, can i redownload & how???

    Help! i purchased a cd and some of the songs are incomplete, can i redownload & how???

    If you are in a country where re-downloading is possible (iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085), delete the track and download again (Downloading [using iOS or computer] past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519).  See tips on downloading in https://discussions.apple.com/message/19097773
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.
    If you cannot download a second time, contact iTunes Store support staff through the report a problem links in your account history or,
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • OPEN DATA SET to write files in application server folder - some of the files are missing

    Hi,
    I'm using OPEN DATASET statement in batch job to write the files in application server. what i'm experiencing is when i schedule the batch job all the files are not writing into the folder.
    If i run the report again to write the missed files, the files are writing into the application server folder.
    after opening the dataset, i'm closing it. do we need to give any delay between creation of the files? or until the first write operation is done, 2nd one can't start ..how can we achieve this.
    Thanks for your help in advance.
    Thanks,
    Adi.

    Hello Bathineni,
    Are you using the sy-subrc check after the OPEN DATASET statement.
    If not use a sy-subrc check and transfer the contents to file only when the OPEN DATASET returns value sy-subrc = 0.
    if sy-subrc is 8 repeat the same loop say for 3 attempts until the OPEN DATASET becomes 0.
    DO 3 TIMES. <---- put any number of attempts as you need
    OPEN DATASET.
    IF sy-subrc = 0.
       TRANSFER contents to file.
       EXIT.
    ENDIF.
    ENDDO.
    CLOSE DATASET.
    Regards,
    Thanga

  • *.xmp files are incomplete.

    I am running Bridge CS5.1 on OSX Lion.
    I am shooing RAW (*.CR2) on a 600D with FW 1.0.2
    My workflow is to copy the files from the card to the internal HDD with finder.  Then browse the files in Bridge, opening them in Camera RAW when edits need to be made. 
    This was working until I reset bridge recently due to some cache corruption (which was resolved by the reset).  Now, on my latest import when I open the files in Camera RAW, make changes and press done an *.xmp is created, however this file does not contain the changes I made (to white balance, exposure, sharpness, cropping etc).  As a result of this, the icon which indicates changes does not show in bridge and when I open the file in Camera RAW again the changes are missing.
    Oddly, this problem is only applicable to my latest import - the files which I had imported previously still work within the same workflow.  So it appreas there's possibly something wrong with the permissions on the newly created files.
    I understand this thread (http://forums.adobe.com/message/4102902#4102902) is addressing a similar problem, and it remains unresolved.
    This is a link to an *.xmp file which is holding the changes - http://dl.dropbox.com/u/14483853/IMG_3825.xmp
    And this is a link to one which is not - http://dl.dropbox.com/u/14483853/IMG_3832.xmp
    Any help would be greatly appreciated.

    The XMP files contain information about the last conversion you did on a particular raw file.  If you delete it your conversion parameters will revert to defaults next time you open the raw file, instead of Camera Raw using the last conversion parameters.
    Go into Edit - Preferences - Camera Raw... and you'll see that you could choose to save the conversion parameters in a central database if you don't like the sidecar XMP files showing up.  If you DO choose the central database, consider upping the max size from the default of 1 GB.
    -Noel

  • HT5731 Hi.  I have just synced my new IPOD classic with my computer and it will not eject.  The message that appears is "Some of the files are in use byanother user".  Could this be because some of the music is my partners which I am authorised to use.

    Hi,
    I have recently purchased the ipod classic and and Ipad.  After syncing my ipod with my laptop I cannot eject the ipod the message that appear is - cannot be ejected because it contains files that are in us by another application - does any one know why this is.  I do have some music in my itunes which is part of my husbands library but he has authorised my laptop to use his music.

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    BTW this is the iPod touch forum

  • ITunes cannot run because some of its files are missing.  Please reinstall.

    Let me join the crowd of people voicinng about problems with iTunes 7.5. The above is what I get for an error message when I try to open iTunes. I tried to reinstall (selecting 'install damaged or missing files' when prompted) and had no luck.
    Looks like others are not having any luck uninstalling iTunes completely and reinstalling. Should I try this or just wait for a fix from iTunes? Before I uninstall, could someone reassure me that doing so won't wipe out my music files?

    Uninstall should not affect your music, however it is a good precaution to save a copy of your library files, iTunes Library.itl and iTunes Music Library.xml which are in your iTunes folder.
    A lot of people have found that downgrading Quicktime solves your issue, have you tried that?
    Uninstall Quicktime using the method in this article(just QUicktime):
    http://docs.info.apple.com/article.html?artnum=93698
    You can download the previous QUicktime from here:
    http://www.apple.com/support/downloads/quicktime72forwindows.html

  • TS1425 I cannot eject my ipod classic after sync with i-tunes on my pc. It states some of the files are being used by other applications. What does this mean? How can I get it to eject?

    I cannot eject my new ipod classic after sync with i-tunes on my pc due, it states, to open files being used by another application. What does this mean? How can I get my ipod to eject?

    If it's a one-time "glitch," you can try restarting your computer with the iPod still connected.  Try ejecting again after the restart.
    If the problem recurs, you may have a process running (other than iTunes) that is accessing the iPod's storage.  When connected, the iPod's "disk" is like other mounted volumes.  This process may be some type of utility that continously monitors your mounted volumes for security reasons, such as to prevent access by malware.
    If you know of such a program that you have running in the background, there may be a setting to exclude your iPod's disk.

  • Gerber Files are incomplete!

    Hi there,
    I have been using Ulticap & Ultiboard 2001 for a number of years now, and after recently having a number of issues with the software I thought it was time I upgraded to Multisim and Ultiboard V10.
    But when it came to producing some Gerber Files in the RS 274x it appeared to produce the gerber files for me, and I noticed that there did appear to be the Drill Files so I sent them off to manufacture.
    But the board manufacturer has no Drill File information at all.
    When I checked back to previous Gerber Files Produced with Ultiboard 2001 and Ultiboard 7 I noticed two additional files that had the following File Extension ***.REP & ***.DRL  all of the files  I have produced have the same extension of ***.GBR
    Have I not generated the Files correctly or is there a setting I have to check before producing the Gerber Files.
    Any assistance on this matter would be much appreciated.

    Let me see if I have this correct
    First I need to Export the Gerber Files in the RS 274x Format
    Then I need to Export the "NC Drill" Files
    Is this correct?
    Sorry if I am sounding "Thick" but I am currently working at the customers premises trying to find an answer for when I get back to the office, so I don't actually have the software open in front of me.
    But from past experiance of using Forums, an answer can take hours to come in, where as this one is minutes.
    Is there any other files I am going to need to Export or should that be it for the time being?
    Thanks for all of your assistance it has been greatly appreciated.
    James

  • I have transferd music from my ipod to my new computer and some of the files are not coming over, i have noticed the m4a files come across but the mp3 do not, any ideas how i can resolve this? thanks

    I have just bought a new computer and i am transfering my music from my ipod onto my new computer, I have put the files from the music option from my ipod onto my computer. alot of the songs have come across, however there is alot of songs that havent. I have noticed that the m4a files come across but the mp3 does not. the new computer has windows 8 on it, which is very new to me. when i try and play the mp3 files, it will open them up in a different programme and will not open in itunes. does anyone know what i can do?!?!!?!?!
    THANKS

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    BTW this is the iPod touch forum

  • ERROR MESSAGE: iTunes cannot run because some of required files are missing

    I don't know how this happened but it all started when my friend was trying to send me songs from his iTunes thru Yahoo Messenger. I tried saving the songs to iTunesminiplayer.dll and iTunes.dll. Then I tried opening iTunes after that to see if maybe the songs would appear on my library. So then I discovered that iTunes won't open anyomore.
    The error message suggested that I reinstall but I'm scared that all my files would be deleted if do that..
    What should I do?
    Dell B130   Windows XP  

    nevermind.. i fixed the problem. =)

  • Some folders and files are 'missing' in lion.

    When I restore them from my SL back up they disappear from there as well. Help

    I'm having serious issues with the LION Upgrade being not only glitchy but now Complete Folders are vanishing from my hard drive.
    I keep a template folder, for speed, on my desktop which I use to start new projects for every client I have.  The main folder labled "jobTEMPLATE"  contains 6 seperate folders Labled Email, JPEGs, PDFs, PSDs, SOURCE, and WEB as well as one blank text.rtf message.
    I duplicate the TEMPLATE folder - name it with the new project and I'm off to the races.
    I just tried to do the same thing a few minutes ago and the Template folder I always use is completely EMPTY!!
    Thank God I backed that folder up on my external because I have client work in progress which is now gone from the desktop!
    Is anyone else having similar issues?  Am I going nuts??
    On an aside, I am also having issues with my magic mouse not liking Lion at all.  My screen will start to pull to the right to go to Mission Controll on its own and / or minimize the entire screen showing multiple windows.
    I am not a happy MACer at the moment!

  • Error: Some of the mappings are incomplete

    I am trying to generate a java diagram from tables that are located in two different schemas.
    Table A, B are in the same schema.
    A.id -> primary key
    B.id -> primary key
    There is a one to many mapping from B to A
    I want to add a third table, C from another database to this.
    Table C ( id, b_id ) -- where id is the primary key and b_id is the table B's primary key. Since these two tables are in different schema's there is no foreign key constraint.
    There is a one - many relationship between B and C ( B can have multiple rows in C )
    The way I have done this - using the Component Palette, done a one - many directed relationship.
    When I try to generate the descriptors I get the following errors:
    1. Mappung uses Indirection but its associated arrtibute is not a ValueHolderInterface
    2. No table refernce is selected
    3. Table reference is invalid because of the target table chosen.
    Thanks

    Did you modify the source code of B or C classes after creating a relationship through the diagram?
    Furthermore, did you map the relationship using the mapping editor?
    Just to let you know that unless a FK constraint exists, it is not possible to create relationships at the class level in the TopLink Mapping Editor in JDev.
    Hope this helps.

  • Files are skipped

    Hi,
    in my scenario where we used to process files of 300 mb of files.The file is split  to 10 mb each using the scripts and then processed. Here like out of 30 files only 20 files are processed some of the files are skipped. No message is created in SXMB_MONI or there is no error in sender Communication Channel in RWB. all the files are archived in the archive directory. What may be the reason for not creating message.
    With Pegards
    Pradeep N

    Hi,
    This is very strange!
    Did you checked message monitoring in adapter engine (not in integration engine)
    goto RWB->Message monitoring->adapter engine and check messages for "Holding", "Waiting" "All containing errors" and "to be delivered" you must find your file/message there.
    If no message is created in SXMB_MONI then it is clear they are somewhere in Adapter engine.
    Regards,
    Gourav
    <i>Reward points if it helps you</i>

Maybe you are looking for