TS1424 What does this page have to do with error code 8003 and not being able to empty trash?
I did a search for help and this is where I keep landing. But I can open the iTunes Store site just fine, even though I never do.
Lastly while at the AT&T Store and
with this guy, I explained that I am in need of a
cellular telephone for work and he said that "I can
take my iPhone SIM card out and put it into my old
telephone (which is a Treo 650) if I need service
back or to use a cell phone in the meantime". Won't
this delay the activation of the iPhone though and
how would an iPhone SIM work in a treo 650 anyways?
AFAIK the SIM that comes with the iPhone is nothing out of the ordinary...just a new SIM card with AT&T livery. I am in the same boat as you and your wife, but I removed the SIM from the iPhone and am using it in my Treo650 until they can sort this out because I need a phone...period. So it does in fact work if you wish to do it.
I have no idea about the rumor that the iPhone must remain docked/online during this process nor do I know if using the new SIM in an old phone is elongating things. My guess is that neither is true and the delay is being caused by a MASSIVE onslaught of activity upon AT&T's mainframe.
Craig
Powerbook G4 Aluminum 1.25 Superdrive Mac OS X (10.3.9) Mac Mini 1.5 running OSX 10.4.8
Similar Messages
-
I have an MX722, with error code 6000. Have powered down and unplugged. code won't clear. what now?
Hi jactoday,
To try and resolve the issue, you will want to ensure that there are no obstructions in the printer that may be causing the error. To do this, please follow the steps located here. If you still receive the error, the printer will require servicing. Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??
The Home and Sleep buttom does only promt the Connect to itunes...
Have closed down anti V and is admin and so on.....
Regards MartinHello mftoby,
Error 9 occurs when the device unexpectedly loses its USB connection with iTunes.
This issue can usually be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/TS3125
Note: For best results and the fastest resolution, it may be best to try the restore on a different computer. This will help isolate if it is an issue with the device or the computer itself.
Thanks,
Matt M. -
This is a stupid question but I needed to ask because I don't want to go there and not being able to buy it, but can I get the iPhone 5 brought straight there when I go to an apple store?
And I meant go to the apple store physically without preordering it online, and I meant the Southampton one. So could I just stroll in apple store and buy a iPhone 5 in Southampton apple store and buy the iPhone 5 straight away? Because I didn't want to have to wait? I just want to go in and buy it and go out with it, if you guys get what I mean? And felipeV if it is in stock could I just buy it and leave with my iPhone 5?
-
I wanted to empty the trash but I get an error code -8003 and I can't continue. What's up?
Hi pete down under!
Here is an article that addresses this issue and should be able to help you resolve it:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/ht1526
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.
Nope. It just opened the installer and stayed in the same loop.
It tells me to choose a startup disk but the only option is the HD which it will not use because it says it cannot gather enough information.
Eveything was working fine until the mountain lion failed install. -
I want to download a picture from my hotmail email, but it keeps reverting back to the email pic. Wont download it. I had to go to my Yahoo account to do this! When I went to the feedback for the New beta version FireFox 4 I was told I had to install the beta version - WHICH I already have! HELP
== This happened ==
Every time Firefox opened
== I downloaded the Beta version FireFox 4The version I am using is 4.0 - I went and Reset user agent to everything showing on the link sent:
general.useragent.extra.firefox;Firefox/4.0b1
general.useragent.locale;en-US
general.useragent.security;U
I am still unable to download pics in hotmail..... Along with not being able to use Aviary Image Editor as it says it is Not compatible with the 4.0 version. So that Add-on picked up the right version I am using. (I use this to take ScreenShots!) - I sure hope this will be available when FireFox 4.0 is fully launched.....................
Along with the email pic problem :(
Thanks for the help -
The new VM is being created via a P2V process run from SCVVM. It reaches a completion of 60% and dies. I asked about this in another question detail of the VVM can be seen at this link:
http://social.technet.microsoft.com/Forums/en-US/virtualmachinemgrp2vv2v/thread/71aae7dc-13b5-46f1-b794-cc1b8085541f
Running Win2008 R2 w/ Hyper-V role enabled & SCVVM 2008R2
In any event I checked the Hyper-V logs to see if they might shead any light on the problem and there were two error messages associated with the attempted conversion. The first Event ID 3430
Log Name: Microsoft-Windows-Hyper-V-Worker-Admin
Source: Microsoft-Windows-Hyper-V-Worker
Date: 5/23/2011 4:51:25 PM
Event ID: 3430
Task Category: None
Level: Error
Keywords:
User: NETWORK SERVICE
Computer: Virtual-Mgt.amrinc-corp.local
Description:
'test1' failed to set/change partition property: The system cannot find message text for message number 0xtest1 in the message file for 18568CA2-82E9-4A9F-B462-701D8FB4C447. '0x8007013D'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>3430</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
<EventRecordID>1</EventRecordID>
<Correlation />
<Execution ProcessID="3316" ThreadID="2716" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>Virtual-Mgt.amrinc-corp.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>test1</VmName>
<VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
<ErrorCodeString>%%2147942717</ErrorCodeString>
<ErrorCode>0x8007013D</ErrorCode>
</VmlEventLog>
</UserData>
</Event>
And the second Event ID 3040
Log Name: Microsoft-Windows-Hyper-V-Worker-Admin
Source: Microsoft-Windows-Hyper-V-Worker
Date: 5/23/2011 4:51:25 PM
Event ID: 3040
Task Category: None
Level: Error
Keywords:
User: NETWORK SERVICE
Computer: Virtual-Mgt.amrinc-corp.local
Description:
'test1' could not initialize. (Virtual machine ID 18568CA2-82E9-4A9F-B462-701D8FB4C447)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>3040</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
<EventRecordID>2</EventRecordID>
<Correlation />
<Execution ProcessID="3316" ThreadID="2716" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>Virtual-Mgt.amrinc-corp.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<VmInitialize xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>test1</VmName>
<VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
</VmInitialize>
</UserData>
</Event>
I have blownout the server and reinstalled the operating system and SCVVM and applied all the current updates to no avail. I have the exact same issue again. The problem seem to be at least on the serface an authority problem because I have no problem creating
new VM via the P2V process on an old Virtual Server running on Win2003R2.
Oh yes I can create new virtual machines on the system in question and move them to the library as was suggested to verify in a Blog post so I am really wondering what the problem is?
Configuration Analyzer Just gave me a warning about reporting not being setup on the VVM which it isn't so no suprise there?
Any information that might help me figure this would be greatly appreciatedI've looked at both threads, and there simply isn't enough information for me to tell you what is wrong. Please collect a trace (instructions in General forum) and open a case with CSS. CSS can provide more in depth analysis than what a forum
post allows.
As a shot in the dark, I have seen the issue outlined in the following KB article cause this exact same error message and symptom,
http://support.microsoft.com/kb/967902
Best Regards, Mike Briggs [MSFT] -- posting provided "AS IS" with no warranties and confers no rights -
What does this apple id is disabled, cannot redeem codes mean?
i've been trying to redeem my gift card and i keep getting the message "this apple id is disbled, cannot redeem codes" i tried resetting my password and everything. Whats wrong? Helpppp!
Sorry but I don't. This error happens all the time on PC when people try to create an iCloud account on their PC, but rarely happens on a Mac. I recall reading a post once that going to System Preferences>Users & Groups and adding the ID (If not already there) solved this problem for someone, but I can't confirm that this works. I guess you could try.
You may have to try contacting Apple support on this one: http://www.apple.com/support/icloud/contact/. -
Does anyone else have display issues with Intel X3100 graphics and OS X Lion?
I took the screenshot below to demonstrate one issue I have had with graphics since upgrading to OS X Lion. I use a Late 2007 MacBook with 2.0GHz Core 2 Duo and the Intel X3100 graphics chipset. I have 4GB RAM. Had to reboot to get this to correct itself. The problem is the menubar (obvious) and the desktop image is missing, replaced by the grey.
I have an external monitor connected (second image) and everything displays properly there.
Some other issues I've noticed are using Mission Control sometimes yields unpredictable results, graphically speaking, and the fullscreen apps don't always allow me to see the menubar. These all seem graphically related. Is this a hardware or software problem? Any solutions?Here is another display issue with my machine...perhaps software rather than hardware? The icon for the rtf file "Matt Passages" is missing entirely. There is a faint rectangle present instead. The same file has an icon in the first image posted above. No change to the file since then. And two other RTFs have the icon! Odd things with Lion.
-
I cannot enter my time machine. I have a message with "error code −6584"
I am trying to access my time machine. I have an error message saying that an unexpected error occurred (error code -6584)
Reboot the whole network first and then retry TM.
If that doesn't work then do a verfiy of the backup.
hold the option key and click the TM icon in the top right area.. a menu with verify appears run that..
If still no good there is a long post with more info.. just follow the More Like This on the right to see if other solutions work. -
TS1424 i cant open up itunes, comes up with error mcvcr80.dll was not found
help
itunes will not upgrade not can it open after re installing
i get the error mcvcr80.dll was not foundClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99504) -
When my MAC would not let me open Safari, I did a verify disk and a permissions repair. The above message came up. When I try to throw Safari away to reload, message comes up that no delete/modify is allowed because OS X requires Safari. What do I try now?
I would reinstall Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
What does "this device is already associated with an Apple ID" mean?
Trying to download a purchased movie to my device and got this message.
Did you use another Apple ID to download earlier?
Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
http://support.apple.com/kb/ht4627 -
What does this 30-pin Apple cable, with a hashed "Y" symbol, do?
I was excited to find this Apple cable in my brother's old room at my parents house. I'm in desperate need of a charge and my 5,000th charger just broke. The one end fits perfectly into my iPhone 4 (think it's called a 30-pin?) but the other end is too thick & short for both my electrical plug adapter & the laptop's USB. It has the Apple symbol on the one side and the other side has a sort of hash-line "Y" symbol. There's a little open circle mid-Y (at the point where the two branches meet forming the base of the V) and the right branch is a blackened in rectangle...Help! Please tell me I can use this random cable to charge my iPhone! And thanks for any input!
That is a FireWire cable used for early iPods. It will not charge your iPhone.
You won't damage anything if you plug it in to a FireWire port though. Your iPhone will just say "Charging is not supported with this accessory."
Maybe you are looking for
-
How to get audio input through 3.5mm on MacBook Air
I am trying to use the 3.5mm jack on the MacBook Air as an input jack. I am running several Mic's to a sound board, and then using it's output to get the audio to my system. The problem is, when I plug the cable into the jack, it thinks it is speaker
-
Time stamp & array passed in a cluster through DLL are not accepted by Teststand
I am trying to pass Timestamp & array data [string array] in a cluster from DLL is not getting recognized by testsand. The action module (DLL) Output (cluster) generates error "System Level Exception.[Error Code: -17502] " the png file show
-
Agent discovery with multiple oraInventory (and multiple owners)
Hello, For various reasons, I have three different users which own Oracle software. These all have their own oraInventory locations (and I therefore have multiple oraInst.loc files in /var/opt/oracle ... yes this is Solaris). In terms of installing/u
-
Java update fail, java update fail
An error occur while installing the updates.(10.3)
-
Hi, We would be going for a SLT refersh from production to Acceptance. Please do share any documents related to this. Thanks, Rajiv