TS1424 why won't my show copy to my ipod

my show won't copy and i done everything the people tell me to do

You said "Then when you run an update it just goes back as it was. Any ideas?" What does this mean?
You can only sync apps from the one syncing computer you can have.
Did you setup the iPod via wifi?
Have you tried restoring from backup on this computer/iTunes library?
The app assume the apps are compatible with your iPod

Similar Messages

  • HT3669 Now that the driver update allows my HP printer to scan, why won't it show up in Image Capture?

    Now  that the driver update allows my HP all-in-one to scan, why won't it show up in Image Capture?

    According to IC's help:
    If you can’t see your scanner in the list, refer to the documentation that came with your scanner to see how to scan images.
    Alternatively, quit IC, reset your AIO in Print&Fax prefPane, relaunch IC, and see if that lists it.

  • Why won't airdrop show up on my control center on my iPad? Also i can't get my pictures to sync from my phone to iPad through sharing.

    why won't airdrop show up on my control center on my iPad? Also i can't get my pictures to sync from my phone to iPad through sharing.

    AirDrop is not available on an iPad 2 or on an iPhone 4S.
    To share content with AirDrop, both users need one of the following devices using iOS 7:
    iPhone 5 or later
    iPad (4th generation)
    iPad mini
    iPod touch (5th generation)
    http://support.apple.com/kb/ht5887
    As to your photos, what sharing are you attempting?  Did you enable Photo Stream?
    http://support.apple.com/kb/ht4486

  • Why won't Apple show in my Common files?

    Why won't Apple show up in my common files when I try to update my Iphone

    I assume Canon 70D came after Lr4 was no longer being fitted with new camera support (i.e. when Lr5 was released).
    (feel free to double-check that assumption - if wrong, then forget the rest of this post..).
    Remedies:
    * upgrade to Lr5, or
    * convert to DNG (using free Adobe Converter).
    ~R.

  • Why won't google work? whenever i try to go to google it just saya 404 Not Found. Also why won't captcha show up. when i have to type in a captcha to show i'm not a robot the words won't show up.

    why won't google work? whenever i try to go to google it just saya 404 Not Found. Also why won't captcha show up. when i have to type in a captcha to show i'm not a robot the words won't show up

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • Why won't my itunes find my new iPod touch?

    My itunes won't find my son's new iPod.  I have tried all the troubleshooting stuff.  I installed the update.  I restarted my computer and all the other stuff.  But it still won't recognize it.  Is the next step to completely reinstall itunes?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Why won't my event copy anymore between libraries?

    Howdy
    In order to back up a large project I am working on, I use two libraries. One is the working library on the RAID, and the other is a local, backup library.
    When I want to 'backup', I would delete the events from the local library, and then copy the events from my RAID library to this local library. This would keep the local library file size small (I guess ignoring render files?), and I could then, via the finder, copy the backup library to another external drive.
    This worked great until yesterday. There is one event now that when I copy to the other library (via drag or File->Copy to Library)...nothing happens.
    It acts as if it's loading something, the library size appears to grow (by way too much), and then it never shows up in the other library.
    I've restarted, tried a new library, etc, but this event just WILL NOT move from it's original library.
    Any ideas?
    Fwiw - my working library is about 600gb right - hence why I'd rather not just copy the library itself.
    Thank yall

    With a 600GB library, you are asking for trouble.
    With so much material, it is likely that your library changes the most, not your media. Keeping the media separate from the library - i.e. using "external media" is safer and gives better performance.
    Consider the following alternative way to handle this:
    1) Choose a location for your media and, optionally, also the render files - a folder outside the library, in the *same* volume.
    2) Use the Modify settings and consolidate commands in FCP X to move all your media to the designated folder. This will be very fast, even with such a huge library, because FCP X will not have to physically move data around (hence this will work even if there is way less than 600GB of free space on the drive.
    3) Your library will now be so small that you can simply copy it from one drive to another as many times as you need.
    4) Of course, you need to also backup your media folder! But as this is not likely to change as much during production, you can update it at the end of the day or so.

  • Why won't Illustrator show pms color accurately?

    If I draw a box in illustrator and fill it with pms 180 it's bright orange. When I do the same thing in photoshop it's red (which is much closer to the actual color). I've synched all of my color settings in bridge but that doesn't make any difference. When I copy the image from illustrator and paste it into photoshop it's still orange. And when I save it as a pdf or export it as a jpeg, it's still orange. I can make it look red in illustrator by switching to overprint preview, but that doesn't do my any good. When I send this file to my client. They keep asking why it's orange and not red!!!

    Get your color management in sync between apps using bridge >> edit > creative suite color settings.
    Make sure both apps are in same color space (cmyk or rgb)
    Below is screenshot of a placed .psd in illustrator against a vector rectangle both filled with pms 180
    If your mintor is color calibrated, then my screenshto should look close to what it shodul be on your monitor. Will never be perfect, especially with some colors  (flourescent, metallic)

  • Why won't some photos copy to iPod from iPhoto?

    I created a folder of favorite pictures in my iPhoto specifically to be set to music in slideshow on my iPod. But of the 65 photos in the original iPhoto folder, only 52 appear on my iPod. (I've tried syncing the entire folder several times--with the same result.) What could be the reason that iPod won't accept so many of the iPhoto pictures?

    For photos try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
    Not all video formats that work in iTunes are compatible with the iPad - the supported formats are (from http://www.apple.com/ipad/specs/) :
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Have you tried Advanced > Create iPad Version and then sync those versions to the iPad
    The iPad's supported audio formats are :
    HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV

  • Why won't images show in Reflow?

    None of the images from my Photoshop file display when i open the file in Reflow. I put the .PNG or .JPG suffixs on the end of every image layer, yet none show in Reflow, just a broken link icon. I checked the images in the Reflow assets folder, they are all there, so i cant understand why they arent displaying in Reflow. Thanks in advance. M

    Sorted it, thanks

  • Why won't this show (same) four pages in the Adobe Reader?

    %PDF-1.6
    3 0 obj
    <</Type /Font /BaseFont /Times-Italic /Subtype /Type1 >>
    endobj
    6 0 obj
    <</Length 158 >>
    stream
    1 0 0 1 50 200 cm /X1 Do
    1 0 0 1 0   200 cm /X1 Do
    1 0 0 1 0   200 cm /X1 Do
    1 0 0 1 200 -400 cm /X1 Do
    1 0 0 1 0 200 cm /X1 Do
    1 0 0 1 0 200 cm /X1 Do
    endstream
    endobj
    4 0 obj
    <</Type /XObject /Subtype /Form /BBox [0 0 1000 1000] /Resources <</Font <</F1 3 0 R>> >>
    /Length 77 >>
    stream
    BT /F1 18 Tf 0 0 Td (18 Point) Tj ET
    BT /F1 25 Tf 0 50 Td (25 Point) Tj ET
    endstream
    endobj
    5 0 obj
    <</Type /Page /Parent 2 0 R /Contents 6 0 R /MediaBox [0 0 595.27 841.88] /UserUnit 0.5 /Resources <</XObject <</X1 4 0 R>> >>
    >>
    endobj
    2 0 obj
    <</Type /Pages /Kids [5 0 R 5 0 R 5 0 R 5 0 R ] /Count 4 >>
    endobj
    1 0 obj
    <</Type /Catalog /Pages 2 0 R >>
    endobj
    xref
    0 7
    0000000000 65535 f
    0000000745 00000 n
    0000000667 00000 n
    0000000010 00000 n
    0000000297 00000 n
    0000000517 00000 n
    0000000085 00000 n
    trailer
    <<
    /Root 1 0 R
    /Size 7
    >>
    startxref
    796
    %%EOF
    Works OK with Chrome's reader......

    1. It may surprise you, but more than 50% of the problems which people ask about with PDF generators turn out to be related to the exact byte layout, and disappear (or get worse) with copy/paste. People with tools for PDF examination like to be able to use them and know they are working on the exact/same file.
    "But why can it not do that."
    Because the question is unanswerable. Imagine an API call
    PageObjectGetPageNumber().
    Given object 5 0 R and asking for the page number, what is the correct answer - 1, 2, 3, or 4? This is of more than academic interest. For example, the page object might be the destination of a link, and an interactive viewer needs to know which page to navigate to. So, while a simple PDF viewer could display it, many things might not work.
    ISO 32000-1 doesn't forbid it. But there isn't much mileage in taking the high ground and saying that one is making good files but Acrobat isn't compliant.

  • Why won't google show images just text since loading new software

    I just loaded new software for ipad but now google images just shows text
    Any ideas

    Hello Burgess944,
    The following article provides troubleshooting steps that can help resolved most issues with apps on your iPad.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    Cheers,
    Allen

  • TS1424 Why won't itunes store open. not getting any error

    Hello, can anyone please tell me why the itunes store will not open for me.

    It either A) shows me a white screen where the store should be, B) shows me the white screen with iTunes Store written in the middle or C) actually shows me the store, but as though it can't read all the sophisticated coding and wants to convert it into just plain ol' HTML.
    With those symptoms, I'd check through the following document:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    (I've seen C reported before with the Bigfoot Networks variation of this sort of business.)

  • Why won't folder contents copy to flash drive

    When copying a file to a flash drive, I get an error saying the folder is already on the flash drive and won't copy anything except the folder itself, no contents.

    I get the same error message, or one similar when trying yo copy to any other drive, external, flash, and from a flash to my external. This just started a couple of weeks ago. Never had a problem before. Not possible to reformat all my externals and flash drives.

  • Why won't my music copy in the order on the playlist?

    Hi,
    Can someone help me please?  I am copying over my music (from my I Tunes library) for a dance class tonight and everytime I play it on my phone or Ipod the order comes out differently and it's jumbled up.  Why?
    Thanks

    Is your playlist set to "Manual order"? Click the the left-most column header for manual sort. Then drag and arrange the songs to the order you want.
    Does that not work?
    Léonie

Maybe you are looking for

  • QuickSilver G4-800 & IOGear GUF320

    Hello all... I have a QuickSilver Power Macintosh G4 800 running Mac OS X 10.4.7. The onboard Firewire failed, and the machine came to me with a Sonnet Allegro FW400 board installed. This wasn't a very good card, so I replaced it with an IOGear GUF32

  • Device error after cleaninstall of win 8 on Z77 GD65

    Hi. Everything is running perfectly on my new installation, but a little nag is annoying me a bit. I have installed all the Drivers available for GD 65 and win 8. Does anyone have a solution? The only thing i can think of is the drivers for USB 3.0 b

  • Amendment in Purchase Order

    Dear Sir/Madam,          How is it possible to amend in Purchase Order when the Purchase order is already approved for Item as well as service order after finally Punching the PO after approval.\ Regards Niladri Bhusan Harichandan

  • Nested Report Problem

    Hello Gurus, I have created a Classic Nested Report following Dietmar's example from: Nested report howto? I followed the steps to create the nested report: Step 1 - created the package create or replace package UNFUND_PCK as    FUNCTION get_unfund_i

  • Oracle Service Bus - Large Configuration Space Best Practices

    Does anyone have any best practices for handling large configurations in Oracle Service Bus (formerly ALSB)? We are going to have hundreds of HTTP services defined. Any best practices for handling proxy service granularity, cross cutting areas and co