TS1436 I cannot burn a CD, it cancels and gives me a message saying unknown error 4310.

Everytime I try to burn a CD it gives me a message saying unknown error 4310, this has just started happening. I have burned several CD's fairly recently on the same type of disks and it worked fine. So my question is, what is going on and how do I fix it?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Similar Messages

  • I have OS X Lion.  I tried to burn photos to a cd.  When it is at the finishing stage it ejects the disc and gives a a message saying the operation couldn't be completed and the drive preform importly. It gives no error code only a box to click ok.  Help.

    I have OS X Lion. I tried to burn photos to a cd. When it is in the finishing phase it says that the drive preformed an error and it cannot retry or correct.(no error code is given that I can see) I tried to slow the burn speed and do not know what else to do.  Help please.

    Hi Janine943,
    Thanks for visiting Apple Support Communities.
    See this article for some troubleshooting steps that can help:
    OS X Lion: If an error message appears while you burn a CD or DVD
    http://support.apple.com/kb/PH3999
    Regards,
    Jeremy

  • Currently cannot burn a dvd or cd post install of snow leopard. Various errors to some times just ejecting the disk with no reason. System was fine prior to upgrading to snow leopard.

    Currently cannot burn a dvd or cd post install of snow leopard. Various errors to some times just ejecting the disk with no reason. System was fine prior to upgrading to snow leopard.

    MATSHITA DVD-R UJ-857E:
    Firmware Revision: ZA0E
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: To show the available burn speeds, insert a disc and choose View > Refresh

  • TS1436 when burning a disc a message appears  unknown error   error 3?

    when burning a disc a message appears  unknown error   error 3?

    Sign out of your account, restart the iPad and then sign in again.
    1. Settings>Store>Apple ID.
    2. Tap your ID and sign out.
    3. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off.
    4. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to download again.

  • Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'.  This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes.  Any ideas?

    Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'.  This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes.  Any ideas?

    try this...
    This is how I managed to fix the problem...and I hope this helps others in the similar situation.
    I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
    I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
    I hope this will help others who are having problems to burn stuff on iTunes.

  • My itunes on my imac cannot stream my music by my airport express. It says unknown error (-15006). My ipad it is no problem.

    My itunes on my imac cannot stream my music by my airport express. It says unknown error (-15006). With my ipad it is no problem.
    My imac has been working before.

    Hello JBrans!
    Did you get help for this problem. Today I got the same problem. Now I don´t know what I can do anything. I did reset AirPort Express. New konfiguration. Nothing. Thank for help!
    Kind regards
    Falk H.

  • Can't get burned CD to be read on my laptop itunes which I'm trying to transfer music to. It just says 'track 1' for the entire CD, and can't be copied. Says unknown error -50 when I try to import. Any ideas?

    So...I'm trying to transfer my itunes music to my laptop. I set up a new itunes on my laptop and, with great difficulty (I'm not technical), I've managed to be successful with the help of my memory stick, which saves wasting CDs.
    However, for some reason a few tracks by a couple of artists don't seem to have transferred. So I had the idea to burn a CD and then copy that directly to my laptop.
    There doesn't seem to be any trouble burning the CD - that works fine. I just select audio CD, and done within a minute or so. But when I then put the CD in my disc drive, it doesn't work.
    It says 'track 1', with no other tracks for the entire CD. When I try to import it, it says 'unknown error -50'. I've tried tinkering with the import settings, but it makes no difference.
    Does anyone have any ideas?
    I'm not that computer literate, so please make it idiot proof

    You can use the bootstrap tar.gz files that are found in the same directory as the iso on every mirror.  If you go to the download page, select the mirror of your choice, you will see a file called "archlinux-bootstrap-2013.10.01-x86_64.tar.gz" (one for i686 also).  That is what you need.
    Unpack it whereever you think is appropriate, if you have enough RAM you can use /tmp.  Then after setting up the partitions in the host (Kali/Debian, or whatever), you can arch-chroot to that unpacked directory.  There you will find all the tools necessary to install (pacman and the arch-install-scripts).
    This method has one issue though, and that is that the arch-chroot script (and maybe others) requires some pretty new versions of various things.  In particular, I think that a pretty new version of bash is required.  So I am not sure about the viability of this solution on anything debian, as their stable repos tend to be pretty conservative.  It also means that you need to have a pretty good understanding of the install process, as you will still mostly follow the beginners guide, but it will require a few changes in the procedure.
    Good luck.

  • I am having problems with  Olympus .orf files one files cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas?  minzen

    i am having problems with  Olympus .orf  which cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas?  minzen

    That camera model is too new for your programs. Every camera has its own raw format and ACR must be updated to include the info for each new model as it comes out. The workaround would be to download the free Adobe DNG converter and use that to convert your ORFs to DNGs that your version of Camera Raw can read.

  • I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

    I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

    It does not magically appear in a new place.  It will only be where you put it.
    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • My Ipad backup error does not respond to "cancel" and it won't go beyond the error message.

    My Ipad is frozen and won't start because the backup to the i-cloud has not succeeded in 5 weeks.  I was traveling and didn't have wireless access.  Now I have access but it doesn't respond to the "cancel" and it won't go beyond the error message.  I am in a new location so a new WiFi information needs to be entered in order for the iCloud to work.  Need to know how to bypass the message and log-on.
    The exact message is:
    iCloud Backup
    This iPad hasn't been backed up in 5 weeks.  Backups happen when this iPad is plugged in, locked, and connected to WiFi.  "OK"

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..

    Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..
    [email protected]

    Both parties must be connected to wifi to use FaceTime (and you must have FaceTime turned on in Settings>Facetime).  If you're phone shows 3G at the top when it's on, you're not connect to wifi; you'll have to solve that problem first.

  • I cannot change my "show caller ID". Under my number it says "Unknown", and I cannot change it. Under "shoe my caller ID" I cannot turn it on and off. Can you help me? THanks

    I cannot change my "show caller ID". Under my number it says "Unknown", and I cannot change it. Under "shoe my caller ID" I cannot turn it on and off. Can you help me? THanks

    Hello,
    Tried rebooting and updating, doesn't work. There is no problem with calling and receiving calls, but my number is blocked, and I cannot turn it on or change it in settings. Can this be fixed?
    Thanks

  • HT1386 I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous from my account???

    I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous one from my account???

    You cannot transfer from the iPhone to the computer.
    You must move the contents of your old computer to the new one directly.
    Use an external hard drive perhaps or restore your old computer backup to your new computer.
    The iPhone is not the source of your data, that is the computer, the iPhone is only a slave device to iTunes.

  • Cannot connect airport express to ipad I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    cannot connect airport express to ipad
    I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
    Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
    I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
    BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
    I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
    So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
    Since I have had this Airport Express I have spent many hours trying to get it to work.
    It works just long enough to fool me and then takes a dump...
    Maybe this time?
    5 Minute later...
    Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
    [An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
    Wonderful Green LED though. Totally useless piece of equipment AFAIK.
    Message was edited by: Daniel Shattuck

  • HT1420 Please help.... cannot get into the ITUNES account. It says unknown error has occured. Is there a problem with ITunes?

    Please help.... cannot get into the ITUNES account. It says unknown error has occured. Is there a problem with ITunes?

    Same thing happened with my iPhone 4S - no one is any help.  Thanks Apple for such a crappy update!  I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone.  Sheesh!  If someone has a solution to this it would be greatly appreciated.

Maybe you are looking for