TS1456 When it is trying to restore it freezes and does not restore.
When it is trying to restore it freezes and does not restore.
If no error messages
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support. -
Currently when I double click it creates cpgz file and does not open. The only way to open pages doc is to manually ask to open with pages.
Hi Karen,
Sounds like OS X has lost the association between Pages and its files.
Start by quitting Pages, then going to Finder.
In Finder, locate a .pages file. Click on it (once), then press command-I (eye, not one) to Get Info.
In the Info window that opens, expand the Open With section.
In this section, click on the pop-up menu and choose Pages (even if Pages is already shown).
Click the Change All button to associate all files with the .pages extension with Pages.
Close the info window.
Double click any .pages file to check that Pages will now launch and open the file.
Regards,
Barry -
When I try to delete my site, I enter my information to confirm my identity. The confirm widow freezes, and does not go to the next step. What can I do, please?
Hi,
Did you try any other browser? is it hosted on Business catalyst? If yes and if you are using custom domain, then login to admin panel using system domain (mysite.businesscatalyst.com) and then try to delete.
Let us know if that works -
Itunes does not open. When I click on itunes it jumps ones and does not open in macbookpro
itunes does not open. When I click on itunes it jumps ones and does not open in macbookpro.NEED AN ANSWER NOW!!!
Hey sebasac,
Thanks for the question. I understand you are experiencing issues with iTunes on a Mac. Let’s see if we can isolate this issue by starting iTunes in safe mode:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
There are several ways in which an add-on can cause iTunes to act erratically, such as those listed below:
- Loss of iTunes functionality, such as the Visualizer.
- Distortion or irregularity in the iTunes interface.
- Slow performance.
- iTunes won't open or quits unexpectedly.
- You see an alert while syncing stating "... cannot be synced. A duplicate file name was specified."
If you notice any of the above symptoms or other unusual behavior, you can disable any plug-ins not manufactured by Apple by opening iTunes in Safe Mode. This is done by holding down the Option and Command keys (on Mac OS X) or holding down the Shift and Control keys (on Windows) while opening iTunes. If performed correctly, you should see the following dialog before iTunes finishes starting up:
"iTunes is running in Safe Mode. Visual plug-ins you have installed have been temporarily disabled."
If the above does not resolve your issue, I’d like to isolate further by testing in another user account:
Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Symptoms
When isolating issues and/or troubleshooting software issues in OS X, you might want to use a different user account. Learn how to use this technique to narrow down the cause of an issue.
Resolution
The issue at hand may simply be caused by a bad preference setting or user-specific data file. With proper isolation, you can avoid time-consuming and inappropriate troubleshooting methods.
Thanks,
Matt M. -
When i click on the application it blinks and does not opens
when i click on the application it blinks and does not opens
Try downloading any small- sized free app and then try again.
-
Hello, do you know that when you play a song skips or returns and does not play properly?
I can not fix this problem and it happens with songs purchased or imported from a CD
-
When I open Lightroom, it doesn't respond and gives me the aptly nicknamed "Spinny Beach Ball of Death."
I have a Late 2009 iMac that meets all system requirements, running OS X Yosemite 10.10.3.
It has been working with these specs before, and just now started acting up.
Thanks! -
why is my itunes not opening?
Try downloading it from here:
http://www.apple.com/itunes/download/
As you begin the download, make sure the left side of the screen shows you are downloading the current version (iTunes 11.1.3). -
I changed hard-drive. Time machine started hopefully and mid-way through the whole thing froze. Since then, back to the same problem
I bought a new one yesterday to check - it went to 15GB, then suddenly all collapsed again. Would that be sheer coincidence that two hard-drives blow up when trying to use time machine?
-
To clarify, when I print the text is so large that it exceeds the page width. I can print same doc using Safari without any problems
The sound seems very faint but can here static on playback.
-
wi-fi in settings does not respond to touch, page becomes frozen and i have to out from it with home button. can not choose network or anything on that screen!?
noelani72 wrote:
I'd be curious to go buy an old Linksys WRT54G Wifi Router and see how the iPads work on it....but my lord, I have already spent so much time on this issue as it is.
Message was edited by: noelani72
Unless you get that WRT54G for free or next to free, pass on it and pick up an old apple WAP off eBay or similar site. Like you my iPad has a connectivity problem with the WRVS4400N running iOS 4.2.1, where it didn't have trouble with iOS 3.2.2 and ran fine for five months.
My solution at the office was to spur a second router off my DSL router just for the iPad. The first was a WRT54G that had to be set to only one 802.11 protocol to keep the iPad reliably connected, but swapped it out for an old airport extreme that I kept on after testing it to be good. With a home network like you describe, I would run a subnet off the WRVS4400N just for iPad using an apple WAP (the configuration app for Windows is easy to use).
Good luck. -
I already stated the problem above, but I am able to download the file. Yet, when I try to begin the setup it says "trying to connect to server" and does not do anything else. I need help to finish the set-up!
Download trial photoshop are you on a managed network? Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve connection errors.
-
when I'm trying to restore my iPhone 3g, it says "The iPhone cannot be restored. An unknown error occurred (10150)"
If the Error is really 1015, it is most likely due to your iPhone having the iPad baseband. If this is the case, you will have to search the Web for tools to use Custom Firmware. These cannot be discussed on Apple Supported Forums.
-
My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Maybe you are looking for
-
I can't sync my iphone to itunes since I updated to ios 7.
I updated my 4S last night with ios 7. After I did it, I couldn't sync my phone to my iTunes account on my computer. I have 11.05 installed. However, I get a pop up message when I plug my phone in to the computer that I need 11.1. Anyone having t
-
Last Run date and User name for a transaction
Hi All, How to find the User who has last run a transaction? I have searched the forum and the Tcode STAT and STAD doesnot help me. Any other pointers please. Thanks
-
How can I create the following table?
hi all, I have been create a tablespaces called as "data", do anyone knows what else I need to create? Thanks Amy CREATE TABLE BSS_PUSC_GROUPS GROUP_NO NUMBER(4) NOT NULL, LOCATION NUMBER(10) NOT NULL, STORE_CLUSTER VARCHAR2(2 BYTE), LAST_UPDATE_ID V
-
Size Limitation for ResultSet in JAVA
when i execute a query as ResultSet rs=st.executeQuery("select ....") It throws an error saying "Please Use Server Side Cursor for large resultset"... But when i execute the same in SQL Query Analyzer, it returns the row properly without any issue...
-
Error - recruiter is unable to print the correspondence activities, SLG1 log shows following error message. The error occurred in program CL_HRRCF_CS_SENDER============CM001 line 105 Version - E-rec 604 support pack 5. Webdynpro Interface, seperate f