TS1463 My ipod won't show anything BUT the red "x"...What do I do?

I turn on my ipod and after the apple logo comes the red "x" It's a couple months old...NEVER been dropped..What can I do to fix this other than paying out my butt to apple.?

See here: iPod Displays a Red "X" Icon
Note that it is often the sign of a hardware failure, usually with the iPod's hard drive.  You can try slapping it again your leg with a bit of force as it may just be that the drive's read/write head is out of place.
If no luck you'll want to have your iPod serviced or replaced either by Apple or a third party repair company.
B-rock

Similar Messages

  • My iPod Won't Show Anything But A Brighter Black Screen.

    My iPod Touch 5g had been working just fine for the last 8 months, and even this morning. But, as I was getting into my car, I turned it on and nothing but a brighter black screen showed up. After a few tries of just pressing the on/off button it finally turned on. It worked for a while then, it just wouldn't turn on at all. When I got home, I plugged it in to the charger and it did the same brighter black screen. It's like it turns on in the background but doesn't let the actual screen show. I've plugged it into my computer and the wall, I've held the home and on/off button together but neither are working. It will also play music from my speakers if I press play on the speakers but it won't show me anything but a brighter black screen. Any tips?

    Brighter black?  Black is black.  It has no shades.
    Please tell me that it has NEVER been jailbroke.  If that's the case, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • My laptop doesn't show anything but the mouse after the logon page at windows 8.1

    my laptop doesn't show anything but the mouse after the logon page at windows 8.1..Acer E5 473G 57QQ

    Hi there! When I read your post, I realized that a clean boot or a safe mode might help. I suggest you read the articles on them if you are not familiar. However, a legacy boot menu to enter a safe mode is unfortunately difficult in windows 8.1 as revealed in method 5 of the following article http://www.7tutorials.com/5-ways-boot-safe-mode-windows-8-windows-81 I am sorry that I was unable to provide a solution directly but hope that this reply will give a direction..............

  • I got frustrated when changing my password and ended up getting about 5 e-mails from Apple, now my ipod won't show up in the window in i-tunes

    I got frustrated when changing my password and ended up getting about five e-mails from Apple, saying the same thing.  Now my ipod won't show up in the itunes window.

    Device not recognized
    http://support.apple.com/kb/TS1538

  • My 5th gen Ipod won't do anything but show the " Connect to your computer, use itunes to restore" screen. However my computer nor anyone else's will recognize my ipod. What can I do?

    My ipod will not do anything but show a screen that asks to "connect ipod to computer, use itunes to restore" My computer however will not recognize my ipod at all so there is no way to restore my ipod. I am not skilled in computers but if anyone has a step by step that would be great.

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Obm-xdg won't show anything in the Openbox menu [SOLVED]

    I put the code:
    <menu execute="obm-xdg" id="obm-xdg" label="xdg"/>
    in ~/.config/openbox/menu.xml just like it says to do universally. It does not show any menu. Every other menu item in the file works. I can edit them and they change. obmenu can see the entry. gnome-menus is installed. obm-xdg works from the command line. Why does this not show anything in the menu?
    Last edited by skottish (2008-11-06 05:27:03)

    Make sure you add the menu id to the root-menu list at the bottom of menu.xml:
    <menu id="root-menu" label="Openbox 3">
    <separator label="Applications" />
    <menu id="obm-xdg" />
    <menu id="apps-accessories-menu"/>
    <menu id="apps-editors-menu"/>
    Last edited by thayer (2008-11-06 05:11:29)

  • Ipod touch 4th gen won't show anything on the screen after "reset all settings" option??

    okay, here's the situation.
    1. I DID NOT under ANY CIRCUMSTANCE Jailbreak this iPod. in fact,  the iPod was FULLY reformatted, and had a whole new library put on it prior to the malfunction.
    2. the iPod WAS FULLY WORKING BEFORE i selected the "Reset all settings" Option from the Privacy menu
    3. I have tried ALL of the reset steps, including, but not limited to; DFU mode, Force reset, Hard reset, Hard reset, Force-into-itunes, and the like.
    So, knowing that I HAVE NOT jailbroken this iPod, and I have tried EVERYTHING tio fix it, what might the problem be? please, someone help ASAP.
    Brandon.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I just updated to Firefox 4.0 and it will not show anything but the homepage, no bookmarks will work and I can't use th eaddress bar, why?

    Last night I updated from the old Firefox to the latest Firefox, 4.0 I think, and now NOTHING works but the homepage. None of my bookmarks work, the address bar doesn't work, nothing. I keep getting the error message "Firefox cannot find the server to the website"

    Simply go to:
    1.View 2.Select tool bars 3. Uncheck any of the toolbars below: a. Babylon toolbar b. Softonic Eng 7 Community tool bar!
    4.Finish.... if nothing happened try to unchechked other tool bars.

  • Ipod won't do anything but restore

    Hello,
    I've had my ipod for about 6 months now working fine. All of the sudden when I put a new cd on it, it needs to restore. Fine... but since I had itunes up my ipod showed I had all those songs, but they were empty. I restored it again, and now itunes no longer picks it up and all I can do is restore. It just flashes the do not disconnect screen. I have followed the procedures of switching ports, updating and reinstalling, resetting, and of course restoring. It worked great, now it does not work at all. Please help.
    Thanks... Patrick

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Hi. I just synced my New Iphone 4S to my Itunes but it didn't transfer anything but the apps? What did I do wrong?

    Here are the steps I made..
    Plugged in old IPhone( IPhone 4)
    Synced to ITunes.
    Unplugged and erased old IPhone (IPhone 4)
    Plugged in new IPhone (IPhone 4 S)
    Followed instructions.
    Restore from old Phone Option.
    Restored Old Apps But No Contact info, Text, or Photos.
    What did I do Wrong?
    Can I still recover my old Info?

    Do you have a backup of your iphone?  if you do, then go to settings -general - reset - erase all contents and settings.  This will wipe your phone clean, then you will have the option to restore from backup  http://support.apple.com/kb/HT1766

  • I can't delete apps on my iPad does anybody knows how to fix it. Also I can't open any iWork apps ,they open but won't show anything.

    I can't delete apps on my iPad does anybody knows how to fix it. Also I can't open any iWork apps ,they open but won't show anything.

    If the whole iPad freezes then something else is going on. Try this next. Close all apps in the recents tray and restart your iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Ipod won't show on powerbook

    I have tried looking at all the posts for this subjuect and nothing is helping. There are people who figure it out on there own , but they don't tell what they did. I have an Ipod nano that connects to my eMac and use to connect to my PB G3. All of a sudden my Ipod won't show up on the PB. I have tried resetting numerous times, I have downloaded the Ipod updater, but if it doesn't see it it doesn't do any good. I have put the Ipod in disk mode and that doesn't help any, I have tried finding it in disk utility and it still isn't there. I can't restore since the PB doesn't see it and restarting the computer doesn't help. I'm probably just driving myself crazy because it still works fine on the desktop but I am no always at the desktop.
    HELP!!! please!!
    Tim

    Hi
    Have you read this
    http://docs.info.apple.com/article.html?artnum=61937

  • Brand new Ipod touch.  we attached to the computer because we don't have wifi.  Now what.  We set up in ID in itunes.  The Ipod won't do anything, just shows itunes on screen but won't budge.

    Brand new Ipod touch.  We attached to the computer because we don't have wifi.  Now what?  We set up in ID in itunes.  The Ipod won't do anything, just shows itunes on screen but won't budge.

    To get iTunes to see your iPod:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

    IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

    It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

  • Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black but my ipod synchronises to my iTunes library. Please help!

    Does anybody know why my ipod touch 3rd generations screen does not work show anything? The screen is all black like it is switched off, but my ipod synchronises to my iTunes library. It is fully charged. Please Help!!!

    Try here:
    iPod touch: Hardware troubleshooting

Maybe you are looking for

  • Double clicking does not open an app or a folder

    I'm writing this for a friend, because she cannot get to this page. Double-clicking (almost always - except when it doesn't) opens a query window. If it's an app in the dock, it queries "Remove from dock, open @ log in ..." When I double click Docume

  • Huge size of ARTMAS IDOCs

    Hello gurus, We are facing an issue in trasmiting generic articles(MARA-ATTYP = 01) along with all its variants via outbound ARTMAS IDOC(Transaction BD10). Some of the articles have around 40-50 variants. When such generic articles are transmitted vi

  • Can't start Numbers, can't reinstall

    MacBook Pro, 10.6.8 (Snow Leopard), bought a year and a half ago. I bought all of iWork from the AppStore right after buying the computer, have used them happily until earlier this month. Now, when I open any of the iWork apps - including Numbers - I

  • Large Letters as I type

    Hi, I have inadvertantly hit an unknown key command and now I get large characters flashing up on the screen as I type. Since I do not know what this feature is called, I cannot turn it off.... can anyone help me do this? I have looked in 'Accessibil

  • Description of material group and material type

    hi, i want to know which are the tables for the description of material group and material type. Edited by: Alvaro Tejada Galindo on Apr 2, 2008 3:49 PM