TS1468 i cant see the album view tiles shown at the start of this help article

Trying to find out how to get compilations to appear as one album and not broken up into several in the display.
Only help on line appears very very old for version 7/8 nothing for version 11.
"Help" does not help.
Old on line article says to mark as compilation but this option does not show in version 11. itunes.

Tried to work with the CTRL+I and sort fields.
Entered all the data, took over an hour. No joy still wont display some songs as albums.
Tried selecting all and ticking the sort fields. Deleted all the data I just entered.
Ouch.
Already finding Apple product unfreindly and expensive best solution may be to go the a player that works instead.
Considerig alternative hardware, s/w used by other family memebers without this kind of frustration.

Similar Messages

  • HT204291 Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

    Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

    Is this a movie from iTunes? If so is it a rental or one you've purchased?

  • I cant see the start menu in the server winsvrstd2012 64 bit eng with sql server standard 2012

      I have   winserver 12  installed and  SQL 2012  and I can not see the start menu  to access the sql  management studio .
    can you help me
    Thanks,  Nawal Abdullah

    Hi,
    In the desktop, press 'Win+Q' combination key to display search apps box in the Charm bar. Type 'SQL Server Studio Management' and press Enter.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Configuration scenario cant see the default adapters

    hi could u plz tell why i cant see the default adapters. this is the trainee server which i sin stalled in our org.i have inported the two business systems one ecc and other xi server business system im unable to see the  adapters in communication channel that is created

    You need to down load the tpz file from
    https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
    Search for the corresponding SAP BASIS SWCV here.
    You need to place this downloaded tpz file in your import directory
    D:\usr\sap\PI7\SYS\global\xi\repository_server\import
    and then in your IR, import this SWCV.
    Regards,
    Jai Shankar

  • Cant see The album artwork!

    Hey i have 30g ipod video 5g. and my problem is,
    i downloaded Itunes7 then i connect my ipod it upgrade my ipod to 1.2 then i restore my ipod , i put the songs i want then i tried to put the artworks of the albums (i have already all of the artworks so i didnt need to download them) but when i try to put the artwork it didnt so i choose the songs right clicked > get info , and put artwork then it put the artworks but when i open my ipod 30gb 5g (video) i cant see the artworks HELP ME PLS...

    ty

  • Cant see the native groups on the forms and reports

    We are migrating 9.3.3 to 11.1.2.1. We recently found the issue after the migration. Even after migrating the users, groups and provisioning using LCM; we cant see the groups in the forms and reports.
    We did the migration for test environment, but didnt encounter this issue.
    For eg, when I click on 'assign access' for a planning form I dont see the group assigned to that form. I can see that group in the shared services with all the provisioning. I can find the group and assign it manually for that form. But it doesn't shows up after the migration.
    I opened the SR with oracle who suggested to bring over the schema and upgrade/register the applications again, as there might not be any groups present when I register the application before.
    We brought over the schema, migrate and register the applications, but the problem still persists.
    Has any one encountered issue like this, I would, I would really appreciate any suggestions.
    thanks

    Thanks for your reply John. I ran the UpdateUsers.cmd utility, but it didnt do anything. I brought over the schema again, updated and registered the application. Everything looks good so far, I can see the groups on dimension access and on the webforms.
    When I run create or refresh security it deletes all the records in HSP_ACCESS_CONTROL. The view link disappears from the planning dimensions and i cant see the groups assigned on the webforms as well.
    Any idea would be highly appreciated.
    thanks

  • Cant see my full view in edit window

    Hi im new to mac and logic 9. In my edit window where you record your music, I cant see the full veiw of the edit window. I mean, at the top where you have the numbers on the ruler that makes up bars, I cant see the first bar. My view on the ruler in the edit window starts at 2 and goes on. How can I set it where I can see the full view of the ruler starting at number one? Thanks I hope at said this right.

    Click and drag the Start marker point to the left
    [Setting Project Properties|http://documentation.apple.com/en/logicpro/usermanual/index.html#cha pter=7%26section=8] look on How to define a project's Start Point
    A

  • I cant see the Video of WMV file through Flip4mac, only audio is working fine on macbook pro. Could anyone please help?

    I cant see the Video of WMV file through Flip4mac, only audio is working fine on macbook pro. Could anyone please help?

    Hi,
    Check to see that external video is turned on.
    View > External Video > All Frames. and
    View > Video Playback > Apple Firewire PAL/NTSC.
    Sandeep

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

  • I cant see the airplay icon on mi iphone 3gs

    i cant see the icon of airplay on my iphone 3gs i have a iphones 3gs wiht ios 5.1.1 i will like to use the airplay betewm mi iphone 3gs and my itunes on my pc , please help me with this NOTE I dont have a Mac i have PC with W7 but i read that is posible plesase help me , and itunes dont show me the icon , when i had a 3g he show me the icone but i cant see it 

    This is from the "Troubleshooting AirPlay" article:
    Resolution
    If the AirPlay icon doesn't appear
    Check for the AirPlay icon ( ) in the recently used apps section on your iOS device, or in iTunes on your computer (as in these articles about how to use AirPlay and how to use AirPlay Mirroring). The icon will only appear if your device or computer is logged onto a Wi-Fi network which has an AirPlay-enabled recipient, such as Apple TV (2nd generation or 3rd generation).
    If you are still unable to see the AirPlay icon, try one of the following steps:
    Verify that your AirPlay-enabled devices have the most up-to-date software or firmware.
    Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
    Verify that all your AirPlay-enabled devices are logged on to the same home Wi-Fi network (check the home network names on your devices to confirm).
    If trying to AirPlay, or AirPlay mirror, to your Apple TV (2nd or 3rd generation), ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay
    Check Internet or network connectivity on all affected devices.
    Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information). 
    The entire article is at http://support.apple.com/kb/TS4215

  • I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

    I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

    Hi Shlomi
    It worked!!! Thanks so much, I've been messing about with this for hours.
    As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
    Any thoughts you have would be much appriciated
    Rob

  • I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    YOU can't fix it.  But you can bring it in to Apple for an out of warranty replacement for $199.

  • I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
    You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
    If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

  • My itunes screen is black and i cant see the writing how do i change the colour

    My itunes screen is black when im trying to find music - how do i change the colour as i cant see the writing

    With that one, perhaps try Drgoo's suggestion from the following post:
    Re: Itunes Store - ALL Text Black/Cant See Anything

  • In smartform editor cant see the option for making bold or italic

    hi EVERYONE,
    I Want to make a heading as BOLD but on my editor i cant see the option to make it as a bold
    i have given the SMART STYLE....i can see all the styles in my style but when i come to TEXT and write a heading...when u want to make it as a bold the editor does bot give me the options.
    how can i make it or what settings do i need to do to get the options.

    HI SRIDER,
    CAN YOU BE LITTLE MORE CLEAR PLS?
    I HAVE EX : doc no AS MY HEADING.
    I want to make DOC NO as bold
    i have in my editor like is
    Document no so how can i make it bold?
    thank you,
    pasala.

Maybe you are looking for

  • Roaming Profile are not stored completely

    Hello NG In our environment we work with NWClient 2 SP1 IR9, ZCM11 SP1a and Roaming profile is activated by a ZCM policy. Now we have the problem, that when a user logout from the workstation, the roaming profile is not stored completely to the home

  • Camera Raw stopped opening Canon 5d Mark II files

    After working for a few weeks, Camera Raw has stopped opening Canon 5D Mark II files. Says it is not a readable file format but I know the files are not corrupt because they will open in the Canon utility. Help appreciated. I have already reloaded th

  • Error in Loan interest_SAP HCM_Payroll India

    Hi All, I have configured Loan process (Infotype 45) and followed all the process everything is working fine, now the problem is while end user is giving 0 % interest calculation on loan amount system is calculating it as 2% interest, why system is c

  • Run batch input to  update customer t-code

    Dear Experts, All Customer updates identified by the lockbox program have been entered into the Customer master records. How can we check this Pls send the process Regards, Hari

  • How to restore original messaging client

    I have installed Nokia Messaging on my 5800XM and found out that it absolutely useless. Before I have succesefully used "Messaging" to access my email via IMAP. However it is not possible anymore to set up IMAP account. If I try to set up a mailbox t