TS1474 can anyone help me in resolving my issue please?

whenever i connect my iphone 4s running ios7.0.2 to my laptop window 7 running latest version of itunes, it displays a message "an iphone has been detected but could not be recognised.disconnect it than reconnect it later" why is it so? my iphone is not being connected to itunes? previously it was connecting properly. this issue started even before updating my iphone to ios7.how it can be fixed now?? any suggestions please!

If you have access to a different USB cable, that would be well worth a try.  Otherwise, you could Reset the iPhone and see if that helps.  Hold down the Sleep button and the Home button at the same time until the Apple logo appears then wait for the Reset, returning your iPhone to the lock-screen.  Now try rebooting your laptop and then connecting the iphone to the USB cable, then the cable to the best USB port available.  If you have two or more USB ports on your computer use a different one than you have been using. 

Similar Messages

  • While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.

    While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
    Can anyone help me to resolve this issue.

    Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
    First did a full back up of  iphone using iTunes
    Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
    Disconnected USB cable from iphone
    Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
    Pressed and kept holding Home button while plugging cable back into phone
    I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
    Recovery Mode alert came up in iTunes.
    Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
    iphone did not appear in iTunes due to missing pairing file (that made me nervous)
    iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
    Eventually the iphone asked if I wanted to restore from a back-up (whew!)
    A window opened in iTunes and I was able to select my previous back-up file for the restore
    A full restore from back-up then occured
    I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
    When the restore was done I had to re-enter some passwords, but everything was there
    iOS is now 5.0.1 (9A406). The whole process took about an hour.

  • Can anyone help with my broad band issue please?

    Hi all, I'm leaving this message here in desperation as I really don't know what else to do apart from cancel my contract with BT.
    I had broadband and a phone line installed on the 26th of May and though the phone line went live straight away, the broadband has not worked. An engineer visited, advised the issue was at the echange and late called my partner to see if the blue light on the hub had come on. She confirmed it had and the engineer than closed the call.
    I arrived home that evening to try and use the broadband and connected but the speed was abysmal.
    I then ran a speed test which informed me my download speed was 0.38mbps. Obviously this speed is not worth paying for.
    I called again to report the poor speed and was told an engineer would visit this morning between 8 and 1. My partner booked this time off from work but the engineer did not turn up. I spoke to the online service to report this and they said they could not see an appointment had been booked. I remembered to print off my previous online conversation with them and even quoted the reference number for the booking. They then said there was a technical issue at their end.
    They have rebooked for next Monday and unless they resolve it there and then I can't see any other option but to cancel the whole thing.
    I am so frustrated at the last of customer service and the fact I have to talk online to someone who is very apologetic but not able to help. I can't believe I can have a service installed on the 26th of last month and it still is not working!
    And the fact that my partner has twice booked half days for the engineer appointments is just bad luck?
    If anyone has any help or knows anyway to expedite the issue or speak to anyone with enough authority to log a complaint I'd be most grateful. Thank you

    from the speed can I assume that it was adsl (copper) and not fibre connection?
    which hub do you have?
    can you enter your phone number and post results remember to delete number  https://www.btwholesale.com/includes/adsl/main.html
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • HT4863 I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

    I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

    Try reentering the password in your iCloud mail settings.

  • I am using iPhone 4S. Recently I updated my software to iOS 6.1 since then my Iphone become very slow. Can anyone help me to resolve it?

    I am using iPhone 4S. Recently I updated my software to iOS 6.1 since then my Iphone become very slow. Can anyone help me to resolve it?

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Remove all apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red  to delete apps from this list.
    - Press the home button twice when done.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • HT1338 I have a macbook Pro i7 mid november 2010. I am wondering if i can exchange my notebook with the latest one. Can anyone help me out with this query please.

    I have a macbook Pro i7 mid november 2010. I am wondering if i can exchange my notebook with the latest one. Can anyone help me out with this query please.

    You can sell your existing computer using eBay, Craigslist or the venue of your choice. You could then use the proceeds to purchase a new computer.

  • I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please iPhone 4, iOS 7.0.3

    I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
    iPhone 4, iOS 7.0.3

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Can anyone help me troubleshoot duplex printing issue to Xerox 8560?

    Can anyone help me troubleshoot duplex printing issue to Xerox 8560 phaser?

    Solution may be found if you search in the "More Like This" section over in the right column and by contacting Xerox tech support. 

  • Can anyone help me with sufficient privileges issue

    Can anyone help me with sufficient privileges issue

    Helping with permissions often requires we know the specific error you find: what program, for example, and what you were doing when told you didn't have privileges.
    If you are running a standard account, you have to get back to the admin acct to make changes. If you are not eh administrator for that computer, find out who is.
    If you are in an admin account, trying a "Repair Permissions" can sometime resolve the issues. Find Disk Utility in Applications > Utilities. Select the indented name of your hard drive, then click the "Repair Permissions" button:
    In OS10.4 this usually under a 2-minute operation. You will probably see a lot of entries in the Reulsts pane but you can ignore those.

  • I've just downloaded iTunes version  11.0.1.12  and lost all my previous playlists. Can anyone help a comparatively computer illiterate user please ?

    Help !
    I've just downloaded the latest version of iTunes   11.0.1.12    and all my playlists etc that were on my earlier version have disappeared.
    Can anyone help me please?  NB  I'm not very computer litterate so non computer tech information would be appreciated please.
    Eggmap.

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Can anyone help me with a passcode issue on my iphone4?

    I have an old ipone 4 that i forgot the passcode for.  I actually want to clear it out and give it to my son to use as an ipod.  I kept trying to enter remember and now it is telling me to try again in 60 minutes.  When I try to hook the phone up to my computer/ itunes it is telling me i need to unlock the phone.. can anyone help?

    Unless you can remember your passcode, there is no other way to get into the device. Your only other option will be to restore you iPod.

  • Can anyone help me to resolve the pop3 setting issues with Mail?!

    How can I resolve the issue I am having with the Pop settings in mail?  I am trying to use the Yahoo! Business Mail, which worked perfectly until I upgraded to Mavericks. 

    So, are you planning to tell us the problem?
    Have you foudn the yahoo server settings and compared them 1:1 to what's in Mail?
    Is there an error?
    Grant

  • Pages 5.1 can anyone help with removing previous page numbers please?

    Hi.  in the new pages 5.1  I have made a section break at page 10 in a document and found how to start numbering from page 10 as page 1. Can anyone please tell me how to remove the page numbers from 1 to 10 that preceed this section?

    from the speed can I assume that it was adsl (copper) and not fibre connection?
    which hub do you have?
    can you enter your phone number and post results remember to delete number  https://www.btwholesale.com/includes/adsl/main.html
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Can Anyone Help? Upgrade with Windows Issue

    I bought my daughter a Ipod nano for Christmas this past year (2005). Everything worked great until the new 6.0 upgrade. We downloaded the upgrade last week and it was completed successfully. Yet when I go to my desktop and try to go to the site I get nothing at all. I can't even access the itunes site. Can't even access it through apple.com. I get the download message. I spent hours on the phone with apple trying to figure out the problem. Uninstalled and reinstalled the whole thing several times. Even went back to my original CD that came with the ipod and still get message that I need to upgrade. I was told
    ( by an apple rep) I have to do a msconfig start up on my computer for the upgrade to work on Windows. Upon doing that I can access my library but access to store is denied. I called apple again and was told they have no idea what is going on but it has to do with the upgrade and windows. I was basically told I may want to consider selling my Ipod, by a apple tech. Is anyone else having this problem. I just want to know how to get the upgrade using windows xp and be able to use it without having to msconfig start and then still not be able to access anything.
    I have tried everything, from shutting down my firewall, anitvirus to rebooting my computer back to before I ever put Itunes in it since I was unable to un-install it with the add/remove on my computer.
    Can anyone give me some advice on how to get this to work with windows? It would be greatly appreciated since I have a few friends also having the same issues. Thanks

    Don't give up yet. At this point I would suggest cleaning your system with ipod and itunes software and reinstall. I know you tried this before but I'm going to give you more detailed instructions. Please read them carefully first before doing them and ask questions if you don't understand them. Also don't skip anything and be careful to not skip part of a step.
    1. Uninstall itunes and ipod software
    2. Reboot your PC
    3. Re-download the itunes installer and QT and save this installer to your desktop
    4. Go to C:\WINDOWS\Downloaded Installations. You should see folders like {06EB3288-C5F4-4C73-8EEE-AC798668FF66}
    5. Look in each of these folders for itunes.msi and delete the folder. Be careful to only delete the folders containing itunes.msi
    6. Clean out your the following folders, Delete as much as you can in these folders except for the folders Cookies, History, Temporary Internet Files.
    a. C:\windows\temp (if one exists)
    b. C:\Documents and Settings\{username}\Local Settings\Temp
    Sometimes installers will pick up old files or won’t delete their temporary files.
    Also delete c:\program files\itunes & c:\program files\ipod
    7. Go to http://www.download.com/3000-2094-881470.html and download the regcleaner. Unpack it and run it. This is a nice utility that will delete broken registry entries and create a file with them. This way if it deletes anything needed you can add it back. Note I never had to do this with using it for many years. Also it doesn't list XP but you'll be fine. I run XP on both.
    8. Reboot your PC.
    9. It wouldn't hurt to scan your PC for viruses at this point.
    10. Now try to go and install everything again. I'd do QT first then follow with itunes. Remember to disable virus/firewall/privacy/web accelerators before launching the install.
    You don't have to try the QT if you don't want to but if you do make sure you do it first before itunes and ipod software.
    I hope this helps! Let me know what happens.

  • YouTube Convert into AVI can Anyone help me???? Please

    Hello,
    I have a question.. i was wondering if there is a free program that allows you to save YouTube Files on to your computer??? I heard there was but I didn't get the address on it.. can anyone please help me ??
    Mem

    now that it's been moved to the right forum, but what you need is Tubesock:
    http://stinkbot.com/Tubesock/

Maybe you are looking for

  • How can I download music files (MP3) and video files (AVI) to iPod Nano?

    I just want to download music files (MP3) and video files (AVI) to my son's iPod Nano and iTunes has all menus grayed out, can't get on Apple support site to upload diagnostics file. Driving me mad - should be simple...  Please help!!! Dump of diagno

  • Connecting Powerbook to External LCD Monitor

    The D-BUS port on the external LCD monitor is a female port, so is the VGA port of the DVI Adapter, How can I connect these 2 if both are female ports, what do I need???

  • Don't have automatic download option for iphone4

    when i try to go into settings then store to enable automatic download the only thing I see is view apple ID or Sign out. Please help

  • Stock transfer from WH to WH

    hello Experts, here is the scenario. we have one plant with two WH located at different geographical locations.  we are planning transfer of stocks using consumption based planning taking SLoc as MRP area. When stock comes done at WH , automatically

  • Bridge does not mark thumbnails with icon after file has been worked.

    I use Windows Vista and process photo files in Bridge using the latest Camera Raw plug-in and Photoshop CS2. Bridge does not mark each thumbnail with a icon as it should after processing. I use the same PS program on another computer using Windows XP