TS1485 change the permission level for iTunes and iTunesHelper to allow full access. how do i do this
How do i change the permission level for Itunes
I have actually been using Amazon cloud for a while now and never had this problem. Actually, I think I did get locked out once and was able to get back in by contacting support and answering some questions. This option isn't available with Apple.. They lock you out for 90 days regardless of whether you can verify your ID. I know this because I contacted them recently and they verified my identity exhaustively and then said 'sorry-there's nothing we can do and you are not getting a refund for time lost.' I think I understand why the policy is there, but I think it's ridiculous that they make no exceptions even when the mistake is on their side, which I'm pretty sure it is in my case.
Similar Messages
-
I changed the email to my itunes and now my cloud is stuck on the old email which I no longer have access.
To change your iCloud account to a new Apple ID, go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPad. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
This will not move your photo stream, however. If you have photos in photo stream that aren't in your camera roll and you haven't backed up anywhere else you will need to save these before deleting the account. To do this, open your photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll. You can then delete the iCloud account and your photos will stay in your camera roll. -
How can I change the phone number for messaging and FaceTime?
How can I change the phone number for messaging and FaceTime?
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
How does one change the font size for folders and/or file lists in the Bookmarks Library?
How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/ -
Can you change the units used for size and position in layout editor?
Hello,
In Aperture 3.4, does anyone know if you can change the units used for size and position in layout editor? The page is set in inches, but the image size and position are given in centimetres and I would prefer to work all in inches to create custom layouts. I can't see any way to change this. If anyone knows how it would be much appreciated. Thanks!Aperture uses the unit settings defined in the System Preferences. Set the "Measurement Units" in the "Region" tab of the "Language & Text" preferences to "US"; the Aperture will display the Size & Position in inches, if it is the "Book" layout manager you are asking about.
Merry Christmas!
Léonie -
I have windows 7 and I have been trying to install the newest update for itunes and quicktime but I keep receiving the same Bonjour error. I even tried to do it manually and no luck. I also tried to unistall bonjour but it would not even allow me to unistall it either. No matter what I do I get the same error listed below:
The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
I would greatly appreciate any help because this appears whether i am trying to install the updates or remove bonjour to reinstall. I am stuck.
Thank You in advance!!!The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
When requested I tried to down load the latest update for itunes and now I cant open itunes as it says Ive lost the MSVCR80.dll file and I don't know how to repair it.
I've tried re-installing as the error message instructed but that hasnt worked.
Can anyone help?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
i just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm, i also cant sighn in either it just keeps on saying accessing itunes....
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I tried to download the newest version for iTunes and now it is saying something about apple mobile device. Never heard of this before and now it will not finish downloading because of this. What is it?? What do i need to do to get itunes to download onto my computer again??
I got most of it done but now it is not letting me delete my C:\Program Files\Common Files\Apple
It says that file is open in another program....What do i need to do to delete that?
Do you currently have the iCloud control panel installed? If so, uninstall that. Can you do the deletion now? -
To change the TOC icons for books and pages
I want to change the TOC icons for books and pages.
How I do this?
ThankHi Christine and welcome to our community
Even in traditional WebHelp output, these are simple images.
I just created a non-skinned output to check. I'm using X5 and in
this version you should be able to find the following images:
* Closed book should be: whd_toc1.gif
* Open book should be: whd_toc2.gif
* Page should be: whd_toc3.gif
So if you want to influence changes to these, you would find
them in your output folder and simply replace (using the same file
name) with the image(s) of your choice.
Cheers... Rick -
Downloaded the newest version of itunes and now I can't access any of my library. It says The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Anybody know what to do?????
I got that Exact message... I think I updated my version of iTunes and it worked correctly.
Hope this helps... -
changed the password on my 4s and now i'm locked out, how can i change my password without accessing my phone?
just so you all don't think i can't read i tried restoring my phone but it is telling me that it can't restore the phone because it is locked. i'm not entirely sure how i entered a password in twice incorrectly, but go figure. does anyone have anyother ideas other than restoring it?
-
In "Previews" when adding text to a picture I can't change the font, even though a few days ago I could. How do I fix this?
kgwrotethis wrote:
10.6
Use Software Update to update your os to 10.6.8 and anything else that needs to be updated. After the installations go to /Library/Preferences - trash the com.apple.Preview.plist file. Repair permissions, restart your computer and empty the trash. Your Preview issue should now be resolved. -
Accidentally I deleted the automatic connection of iPhone and I choosed instead explorer. How can I undo this. I have Windows8.
Thanks in advance.Hi there gali2012!
I believe I have an article that will help you troubleshoot this issue:
iOS: Disabling digital camera notification in Windows
http://support.apple.com/kb/TS1500
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I tried to reset my settings in my iPhone 4 and now it won't restore my iPhone. I tried connecting it to iTunes and it won't work. How can I fix this?
Did you try to connect in recovery mode, explained in this article?
iOS: Recovery mode
Maybe you are looking for
-
SATA CD or DVD ROMS or BURNERS?
This is something that occurred to me, This could be either an interesting question or the dumbest question on earth, What if you use an IDE to SATA adaptor and then run a SATA cable for lets say a CD or DVD ROM or BURNER?
-
"COM object that has been separated from its underlying RCW cannot be used.
I am constantly getting the following error when closing my app if we viewed/printed a report. What do I need to do to correct this error? For the following error, I opened my app, viewed a report on the screen using the 'CrystalReportViewer', clos
-
Windows Media Player Extension "Add-on for this website failed to run" except for Administrator
This is on a Windows server 2008 r2. I am trying to allow users to watch help videos at a vendor site. If I remote desktop using the Administrator, I can play the videos and if I check the "manage add-ons", I see Windows Media Player as an extension.
-
I want to export my video in ultra hd(4096x3112) how can i do that?
i want to export in ultra hd...please help
-
The project is HD and when I go to print to video through firewire the audio prints however the video does not. When I stop the video on my computer the last frame shows up on my tape but nothing else. O the view tab I have external video, ALL FRAMES