TS1489 the instructions are misleading, there is no compatability tab under itune properties. still getting the message that itune.exe run in compatability mode-so??
dear all,
appreciate any help with the new iyune install.
get a message that itune.exe set to run in compatabilty mode for an older version of windows. i use windows7.
tried to follow the apple support instructions but found them misleading as couldn find compatability tab under (right click) prperties...
any other idea??
many thanks
Amazing that someone noticed this post and took a stab at it after over a year... Actually, I found my answer long ago, and have tried to go back and post?it'son several boards where I had been looking for the answer. It seems to be such a common problem that I figure someone else can surely use this solution as I did. I would suggest that anyone?who is experiencing the frustration of not?getting their computer to recognize their device?read the very enlightening and helpful page that I am linking to here:
http://www.misticri'ver.net/forums/showthread.php?t=30939? (this is from a forum for iRi'ver, but the info and fix are uni'versal)
This simple solution involves correcting the ENUM keys in the Registry (not as scary as you might think) and deleting all instances of your player from the Device Manager and then reinstalling so that Windows and other applications will all recognize your player again. It's so simple, and once I tried it, I was amazed that's all it took to fix the problem.
?I?suggest you read the whole page and follow the instructions as they are given. I deleted and re-installed my player several times and then rebooted a couple of times before it took effect, but then it did, and I was able to download the Firmware and have had continued success with my original player that I posted about as well as others I have acquired since I first posted that message in 2006. For reasons I have not yet identified, this problem still happens every now and again, sometimes when I switch between players to synchronize. It may well be that when I use my registry cleaner or some other utility that "fixes" my registry, that it resets this particular key - but as long as it's easy to fix, it's not a problem. Hope this helps others who may stumble upon this odd little problem with the Zen Xtra.Message Edited by TrixieInDixie on -05-200709:28 PM
Similar Messages
-
I downloaded the latest version of itunes. I am now getting the message that my ipod is in recovery and needs to be restored. When I click to restore, it says it does not recognize this device. Now my ipod is frozen with an image of a cord and an arrow pointing toward the itunes icon. All was working fine before the download!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
No more details other than above . I have uninstalled and re-installed FIREFOX several times and still get this issue. Also, very slow in connecting to websites.
See:
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding -
I ran out of storage for backup. I followed the website directions and delted 1/2 of mmy pics, all my videos and the Apps I haven't used in a while. What else can I do?
Hello Terri0125,
Thank you for using Apple Support Communities!
You have a couple of options here. First you can use this article to manage your iCloud storage:
iCloud: Managing your iCloud storage
http://support.apple.com/kb/ht4847
You can manage the storage either from your device, or from a computer. Whichever is more convenient for you.
You can also backup your device to iTunes for a local backup if you want.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care,
Sterling -
I'm getting the message that my MacBook Pro has run out of application memory?
If I'm not paying attention and am running more then 1 application at the same time I get a message that I've run out of application memory and need to "force quit" current applications in order to continue. Anything I can do to resolve this problem like add more RAM/
First, all so-called "memory cleaning" software is worse than useless.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent". How do I close these programs?
If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
Parallels has a forum here:
http://forum.parallels.com/forum.php
I think you'll get a faster response there. -
After a trip to Brazil, the App Store apparently thinks my iPad 2 is still there. When I try to download an app, I get a message that I can't get that app from the Brazilian store and have to switch to the U.S. store. The general settings are correct. I apparently need to switch locations manually, specifically for the App Store. Help?
Open the App Store app, go to the Featured pane, swipe to the bottom, tap your Apple ID and sign out. Tap again and sign back in. The App Store will automatically change to the store from which your account is authorized to make purchases.
-
Sometimes they are there when I reopen my iPad, even without Internet access. Other times I get the message that the page can't be found because I don't have Internet access.
You're welcome
I use Reading List all the time.
If applicable, you can access saved Reading List articles in Airplane mode > iOS: Understanding airplane mode -
When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark. However, I know there a quite a few number of changes. I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents. However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked. When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?
OCR is only for recoginition of the image / picture of text provided by an scanner.
Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image or picture of text - it is the digital text. So, no OCR involved.
When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
Once OCR is performed it is the OCR output that is exported.
OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents".
Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
being processed with Acrobat Pro's Compare can certainly be done.
But - well you've described what can be observed.
Be well... -
every time ( I mean every day ) when I connect my iPad to sync I get the message that there are new carrier settings - I accept them and then it says they have been updated - then if I re-connect it says it again - is this correct or is it a bug ?
This is the iphone forum
-
Happens when going to print.coupons.com. I click the "learn more" button on the message that the plugin has crashed, and I get sent to the Adobe Flash plugin crash info page on Firefox. They say just to reload the page. There is a button for this. I click it and the page tries to reload for 5 minutes before freezing.
https://support.mozilla.com/en-US/kb/Firefox+crashes#Getting_help_with_your_crash
-
When I try to use the editor in Joomla, I get the message that cut & paste are not available.
Hi -- I'm using Joomla to develop a website. When I try to use the editor, I get the message that cut & paste are not available. I am directed to instructions to edit the user.js file. I found the file in xhpnmg5i.default and then inserted the various 'user_pref' lines as instructed changing the site name to "http://localhost". This made no difference whatsoever so I downloaded an add on called allow clipboard helper. Looks great but how do you use it? There's nowhere on the screen that allows you to start the program. I've spend most of the day trying to do something that I'm surprised an open source program doesn't just let me do. HELP
Uninstall the program then download and reinstall - activate with the serial number from your Amazon purchase.
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html -
I have all my music on my ipad and icloud. I don't have itunes installed on a PC or MAC. I recently purchased Music Match, but all my non itunes music is on my ipad. When i turn on music match in the settings screen on my ipad i get a message that says all my music will be erased. How do I get music match to match what is there rather than erase it?
Killerfinch wrote:
My new yahoo account nestles comfortably in iCloud on the mine iPad.
No, your Yahoo account is not in iCloud (which only handles iCloud mail), it is in Yahoo, and the Yahoo mail account is on your iPad.
But the MacBook Pro will have none of it! I write this question now as I fear that I will be totally demented very soon and unable to formulate my thoughts clearly!
Get the correct settings for your account from Yahoo and set it up manually.
By the way, I also find the "password" issue problematical. It seems Apple want my Apple password rather than my eMail password. All very confusing.
That would depend on what you are trying to do. -
Lync 2013 generates repeated messages stating “Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.”. Events that
seem to generate messages is disconnecting and re-connecting to a network but it also happens randomly and the messages will stack up during a working day. Everything seem to work OK but it is an annoyance. The computer is upgraded (uninstalled first)
from Office 2013 ProPlus to Office 365 ProPlus. Outlook (Desktop) is default mail client. 64-bit Windows 8.1 Enterprise, 64-bit Office (both before upgrade and after).
(Links removed to remediations I've tried)
Made no difference what so ever and the messages continue. What's next?
I posted the above to the Office 2013 forum (unfortunately I'm not allowed yet to post a link to that posting) but due to the fact that the computer affected by this is a networked domain computer I've been redirected to this group instead. I
was asked some additional questions ing the other forum regarding the problem:
Are you able to send mails from other applications like Word or Excel?
NO
Is the PC connected to any Domain/Server? YES
Is this an issue with one PC only. NO - affects all computers that once had Office 2013 Pro Plus installed and now has Office 365 Pro Plus (Originally I posted this question in the Office 365 community but was directed to first the Office
2013 forum and now this forum)
Right click on any file and Click on Send to-> Mail Recipient and check if you are able to send mails using Outlook.
NO
Also check if the Lync add-in is enabled in Outlook.
Start Outlook
Click the File tab.
Go to Options.
Click Add-ins.
Check if the Lync add-in is enabled. YES
My last posting in the other forum contained the following additional information regarding our problem:
As far as we can see installing 32-bit Office 365 Pro Plus using click to run makes no difference.
We do not send any mails from Lync, Lync is however the process that generates the message most frequently (as Lync seem to react upon network events).
Other processes that have Outlook plugins may also be the parent of the message popup (third party applications).
Yes the Lync add-in is enabled. Lync functionality in/from Outlook seem unaffected.
It is not possible to send emails from other applications (explorer, word, excel etc.) ie. right clicking and send to generates the messages and
a follow up error message concerning lack of MAPI enabled e-mail.Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
When trying to update my iPad on iTunes I keep getting a message that the download has stopped because the file is full. There is plenty of space on the iPad. Also, the message says to check the settings. What am I supposed to check in the settings? What do I do now?
I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.
Maybe you are looking for
-
i lost every single thing on my macbook pro and i do not know how to recover my 77 gb of software data back to my computer how do i get this back? thank you
-
Adobe RoboHelp 9 and Adobe Acrobat X Pro
Hi there. I am currently using Adobe RoboHelp 9 and Adobe Acrobat X Pro (windows) can you please tell me which is the lastest version I can upgrade too and the name of the current version as well. Cost as well. thanks
-
Hello, A) Can anyone tell me what this vendor group is? What is it used for? B) A have a case (SRM SUS) where in a vendor X supply it to Y by procuring from number of sub-vendors (A, B, C) which are on SRM. Now is it possible for vendor X to check ve
-
How do i get my security question
how do i get my security question answer?
-
How to make selection on JComboBox.
Dear all, I want to make condition on basis of selection of JComboBox. Any one have code of such scenrio. Thanks in advance.