TS1490 What are the Proxy, Port and Server settings supposed to be?

What are the Proxy, Port and Server settings supposed to be for itunes (windows 8)?
I havent been able to access itunes store for WEEKS, and i have gone through nearly everything to try and resolve it.

http://support.apple.com/kb/TS1490

Similar Messages

With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

Gary Krouse
We will customize a very detailed reply, but
(a) What are the properties of your source media?
(b) What did you or the program set as the project preset to match the properties of the source media?
(c) What specific requirements do you have for this H.264.mov export file?
File size can be a compromise between bitrate, file size, and quality.
Thanks.
ATR

What are the correct setup and system settings for importing HDV video from tape?

I keep trying different "easy setups" and system settings/preferences in order to import both the audio and video from HDV recordings on miniDV tape to no avail in either FCE4 or FCP5. I import via firewire from the camera. My computer "sees" the camera and controls playback (I can hear the audio) but no video displays for capture (just color bars).
My camera is a Canon Vixia HV40 and my computer is a MacBook Pro running Snow Leopard 10.6.8.
I've tried the HDV easy setup...no video...
I've tried HDV 1080i/60 as I saw recommended somewhere else...no video...
Captures standard video just fine but I'd like to try editing some higher def footage.
Any suggestions?
Many thanks.

The combination of all these helpful ideas solved the problem.
I set AV settings to HD and Apple Intermediate Codec HDV 1080i/60 AND set the cameras output to "locked" HDV. Funny, it had been on "A" (Auto) before and should have simply sensed the need for HD output. I then tried to capture using "A" again and this time it detected the difference between SD footage and HDV footage (I had clips of both kinds on the same tape).
I ran similar capture tests on FCP 5.1, FCE 4, and FCPX and all three programs captured HDV video and audio.
Thanks again everyone. Be sure the camera is set to output HDV or "A".

What are the best import and export settings? I'm losing lots of quality in iMovie...especially in the shadows?

I am creating timelapse videos using Quicktime pro's Image Sequence. I then save them and import them into iMovie. Problem is...when I bring them into iMovie...I lose tons of quality it seems. The shaddows get all blocky and pixelated? Then when I export the movie...it's even worse. I'm creating this footage from images taken on a Nikon D3s so the footage should be CRYSTAL clear...and IS in Quicktime Pro at the beginning...but when it's brought into iMovie it's like it gets all compressed etc. How do I create beautiful stunning footage that doesn't look compressed and pixelated? Thanks!

> You just need to use a larger file or settle for less quality
This is not always exactly true. There are many things that can affect the perceived quality. In Premiere's case:
1.) Deinterlacing: If your sources are interlaced, Premiere (by default) will deinterlace them before scaling down for web export. Premiere's deinterlacer is as bad as it gets. If you are doing a ratio >= 2:1 (such as 480i -> 240p) it is probably better to untick the "deinterlace" checkbox, as the line-pairs will be blended on output anyway because of the large scaling ratio.
2.) Soft scaling: Premiere's Bicubic resampling is not really ideal for large ratio reductions. Unfortunately, there is not much way around this without using other tools.
3.) Noise: Video noise can greatly reduce the efficiency of encoding -- and therefore, when using a set data rate, it makes lowers quality output. Premiere does have a noise reduction filter option in AME, but it is quite slow and not the most sophisticated solution. You may want to experiment with it anyway: It can potentially make low bandwidth encodes look much better.
4.) Frame rate: It seems like a basic concept, but many people forget that you can greatly increase your spatial quality by reducing the frame rate. If you can live without the motion smoothness of 30 fps, you can get much higher quality with 15 fps at the same data rate.
5.) Two-pass Encoding: Unfortunately, Premiere does not have 2-pass for FLV VP6 which, IMO, is probably the "best looking" web output. You should look at other tools like Sorenson Squeeze or On2 Flix. In these cases you'll need to export a lossless intermediary AVI file to maximize quality.

What is the proxy setup and the port

What is the proxy setup and the port

hadi123 wrote:
What is the proxy setup and the port
Could you give a little more detail on your question please.
If you looking to setup a proxy server and port so your printer can connect the printer to HP ePrint, you will often find this setting in the embedded webserver of a printer. Open up a web browser, and type http://<address of your printer> where the address of your printer is an IP address or hostname (such as http://192.168.2.2). From the EWS, there will be a configuration section for HP ePrint, and you should find options for setting the proxy host and port in this area.
I work for HP.

What are the different ports required to Deploy(Run) an application in NWDS

Hi all,
We have a issue here in deploying our application in NWDS. As we are accessing our servers(from another country) thru firewalls in between, most of the ports are blocked for security reasons,henceforth, we are unable to deploy our application in NWDS.
Initially port 3601 was blocked, now its open.when i try to deploy my application , it prompts for a SDM password, after i enter it , it gives me error saying it can't process thru 50018 port.
So my query is , to build,deploy and run or debug a application in NWDS what are the different ports that needs to be accessable ?( so that i can tell my basis guys that all this specific ports need to be opened )
(Note: will the SDM port, debug port,Http port be enough to deploy and run an application)
Need your help on this
Regards,
Vijay

Hi Arun,
Thanks for your reply, as you told port 3601, its already opened. I didnt understand about the 3200,3300,3299. Can u be more clear about why each of this port is used for? ( bcoz i need to give a reason to my Basis guys,what each port is for)
Hope this Log details of the error that I get here helps you:-
<i>Settings
SDM host : "ServerName"
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/abap1/LOCALS1/Temp/temp22390Welcome.ear
Deployment exception : Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"
Inner exception was :
Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"</i>
appreciate your valuable inputs.

What are the logical structure and physical structure in oracle

what are the logical structure and physical structure in oracle and how can allocate a DB block size as default size is 8192?

From the Concepts Guide
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/toc.htm
The physical structures are:
Datafiles
Control Files
Redo Log Files
Archive Log Files
Parameter Files
Alert and Trace Log Files
Backup Files
The Logical Structures are:
Tablespaces
Oracle Data Blocks
Extents
Segments

What are the key benefits and limitations of new pricing model of X5-2?

What are the key benefits and limitations of new pricing model that started with X5 version?

1. Elastic Configurations
Size/price hardware by the number of servers; Fixed configs no longer required
Start with 2 Database Servers and 3 Storage Servers. Incrementally add database or storage servers online.
2. Capacity-on-Demand (CoD)
Upon installation, activate 40-100% of the cores per server and reduce software licenses; Applies to Eighth Rack now too
Activate and license more cores when needed; Active cores may not be deactivated
3. OVM and Trusted Partitions
License software on Virtual CPUs within a VM; Ideal for special-purpose DB options
You can mix different combination of options for different DB on one Exadata.
OVM has no License cost; support is included with premier hardware support
Limitation:
At least 40% of usable cores on the machine must be licensed for Oracle software
Cannot use both OVM and CoD to license less than 40% of cores
A server must be virtualized or non-virtualized – not mixed
A RAC cluster can mix virtualized and non-virtualized servers
4. “Flash Drive” License Metric for EF Storage Server Software
$20K/drive; 8 flash drives/EF server vs 12 disk drives/HC server = 33% higher list
Can transfer licenses between Flash Drive (2 licenses/drive) and Disk Drive (1 license/drive) – part # is the same

What are the system ports that XI uses to invoke web services?

Hi guys,
Anyone knows what are the system ports that XI uses to invoke and to be invoked from web services?
I think it uses the port of AFW but I dont have sure
Thanks in advance,
Ricardo.

hi,
if you want to invoke a WS on the XI use
the j2ee port (5XX00)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Has anyone developed a site for podcast in Muse? If so what are the pro's and con's vs. using Wordpress?

have built a few sites in Muse and hope to host my podcast on a dedicated Muse created site. I use BC for my sites. Has anyone designed a podcast site in Muse and if so, what are the por's and con's opposed to just doing this with Wordpress and power press plugins?

one-armed is the easiest to install - less disruptive as you can keep your current network unchanged.
However, it requires special configuration to guarantee that the return traffic from the server goes back to the CSM.
This is done by doing client nat which will prevent the servers to see the client ip address and therefore to create statistic based on client ip.
There is a way to inser the client ip in the HTTP header, but it only works for HTTP.
Router-mode is easier to understand and troubleshoot.
The CSM is just like a router with vlans and routing between each of these.
It requires a minimum of configuration.
However, it is important to design correctly.
For example I would recommend not to have client accessing the CSM directly.
They should go through the MSFC first.
Then I would recommend to have only 1 vlan between CSM and MSFC- this is because the CSM only uses 1 default gateway even if you can configure many.
You never know which is active.
The CSM also expect the traffic to come back on the vlan it went out. If you have multiple vlan it is difficult to control on which vlan the response will come back.
Finally 'bridge mode' is good if you want to insert the CSM between the servers and their current default gateway without having to reconfigure the servers.
This is a good solution.
Disadvantage is that all traffic from servers will go through the CSM and it is more difficult to avoid in case you really need it.
A little more complex to troubleshoot as well.
Conclusion: bridge or routing mode is ok - avoid at all cost one-armed.
Regards,
Gilles

What are the blades in a server?

I know CPU, memory and HD size. However I do not know what are the blades in a server.
Would you please explain a bit? Thanks!

Symptom
You need to decide which main memory size you should use for the blades of your BIA landscape.
Other terms
BI Accelerator, sizing, main memory, RAM, 8 GB, 16 GB, 32 GB
Reason and Prerequisites
You need to decide which main memory size you should use for the blades of your BIA landscape.
Solution
Note: Based on the sizing of your system (considering main memory, CPU and including future needs of BIA resources) you should contact your hardware partner to get a BIA landscape optimally sized to your needs.
Supported main memory sizes
           Currently, the use of blades with 8GB, 16GB or 32GB RAM is supported for BIA depending on blade and CPU architecture and depending on the hardware vendor.
Recommendations
SAP recommends to use the latest generation of blades with 16GB main memory.
                    This allows an optimal distribution of BIA indexes even for high loads due to a great amount of users. In addition to that, indexing performance profits if more blades are used in a BIA landscape.
Use of 32GB main memory size to avoid additional hardware costs
                    If the sizing for the BIA leads to a number of blades with 16GB main memory with just a few blades more than the number of blades fitting into an enclosure, then the use of blades with 32GB main memory should be preferred.
                    Example:
Assuming that your BIA sizing requires 480GB, which results in 30 blades with 16GB main memory each. Then you should order 15 blades with 32GB main memory instead, so you can avoid the usage of an additional enclosure. In addition to that, there is space for additional blades that can be used as backup blades.
Use of blades with the same main memory size
                    Heterogeneous BIA landscapes are supported in BIA 7.0 Revision 47 and later. But SAP recommends to use blades with the same main memory size for the best possible performance in scenarios with high loads due to a great amount of users.
Use of 8GB RAM main memory size
                    BIA blades with only 8GB RAM should be used only for very small BIA landscapes up to four blades. Use of those blades was introduced to fit to the needs of the SME (Small and Medium Enterprises) market.

What are the output type and Tcodes?+

What are the output type and Tcodes?

hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

What are the different tools and techniques available to track analytics in SharePoint online 2013?

I want to know What are the different tools and techniques available to track analytics in SharePoint online 2013. Please provide your suggestions/ inputs. Thanks in advance.

you can Use the Web Analytics Integration app to
connect your SharePoint Online public website to third-party web analytics services, such as Webtrends, Google Analytics, Adobe, and so on.
Google Analytics
Webtrends for SharePoint
CARDIOLOG ANALYTICS
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What are the pro's and con's of the 4s?

I am not yet an owner of the 4s iphone. So what are the pro's and con's of owning the white 32gb iphone 4s? I have had the white 32 gb iphone 3gs for two years and until I get a job I will not be buying the 4s I so need.

Samplers do alot of things, what do you need a sampler for?
Korgs remind me of alot of presets and alot of verb and chorus. I guess if you're posting here you already have EXS and want more sounds or more functionality and if the korg thing is true you lean more to sampling/synthesis than instrument recreation (as in you probably aren't going for VSL if the korg caught your ear). Independence looks really cool, it's quite new. Kontakt is demanding and very flexible, both include huge libraries and I know kontakt has tons of great filters, FX, modulation. It also needs a pretty strong update-which is being dealt with after a year or so.

TS1490 What are the Proxy, Port and Server settings supposed to be?

Similar Messages

Maybe you are looking for